|
US$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 60037-2013: Coated fabrics for membrane structures. Test method for tensile creep
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 60037-2013 | English | 149 |
Add to Cart
|
3 days [Need to translate]
|
Coated fabrics for membrane structures. Test method for tensile creep
| Valid |
FZ/T 60037-2013
|
PDF similar to FZ/T 60037-2013
Basic data | Standard ID | FZ/T 60037-2013 (FZ/T60037-2013) | | Description (Translated English) | Coated fabrics for membrane structures. Test method for tensile creep | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W55 | | Classification of International Standard | 59.100.01 | | Word Count Estimation | 6,651 | | Quoted Standard | GB/T 3923.1; GB/T 6529 | | Regulation (derived from) | Ministry of Industry and Information Notice No. 52 of 2013; industry standard for filing Notice 2013 No. 12 (No. 168 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies: Determination of membrane structure coated fabric (hereinafter referred to as membrane) Tensile creep properties methods. This standard applies to: a synthetic fiber or glass fiber fabric to fabric, impregnated, coated or covered | FZ/T 60037-2013: Coated fabrics for membrane structures. Test method for tensile creep---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Coated fabrics for membrane structures.Test method for tensile creep
ICS 59.100.01
W55
People's Republic of China textile industry standards
Coated fabric membrane structures
Test method for tensile creep properties
Issued on. 2013-10-17
2014-03-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee Textile Industrial Textiles Technical Committee (SAC/TC209/SC7) centralized.
This standard was drafted. Textile Standard (Beijing) Co., Ltd. Inspection and Certification Center, China Textiles Industry Association.
The main drafters. Zhang Hui, Han Yuru, Xu Road, LI Gui-mei.
Coated fabric membrane structures
Test method for tensile creep properties
1 Scope
This standard specifies the structure of the film was measured with a coating fabric (hereinafter referred to as membrane) tensile creep performance.
This standard applies to synthetic fiber or glass fiber fabric is fabric, impregnated, coated or covered with polymer lamination process in the fabric surface
Continuous layer, a membrane structure coated fabrics used.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 3923.1 Textiles Tensile properties of fabrics - Part 1. breaking strength and elongation Strip method
GB/T 6529 Textiles Standard conditioning and testing atmosphere
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Tensile creep tensilecreep
Under a constant tensile load, the deformation of the specimen with time stretching.
3.2
Constant load elongation elongationunderconstantload
Under constant tensile load, elongation ratio of the sample and the initial length of a point in time, expressed as a percentage.
4 Test principle
Under specified test conditions were a set of constant load applied uniformly over the entire width of the sample, according to a predetermined time interval measurement
The sample is loaded onto a predetermined elongation time, the recording time of sample creep elongation and the corresponding data sheets.
5 Instruments
5.1 The instrument should include a clamping system, loading system and the length of the measurement system.
5.2 clamping system should meet the following criteria.
--- Fixture should be at the center of the tension axis, holding the line should be perpendicular to the direction of pull;
--- Clamp width should be sufficient for holding the entire width of the specimen, and the specimen during the test shall ensure that no slippage or breakage.
5.3 loading system should meet the following criteria.
--- Loading process, the tensile creep load should be constant at ± 1%, and is applied uniformly over the entire width of the specimen;
--- Loading system should have the ability to pre-tension applied to the specimen;
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 60037-2013_English be delivered?Answer: Upon your order, we will start to translate FZ/T 60037-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 60037-2013_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 60037-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|