HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

FZ/T 60008-2019 English PDF

US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 60008-2019: Test method for non-recoverable extension of blanket
Status: Valid

FZ/T 60008: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
FZ/T 60008-2019English119 Add to Cart 3 days [Need to translate] Test method for non-recoverable extension of blanket Valid FZ/T 60008-2019
FZ/T 60008-1992English319 Add to Cart 3 days [Need to translate] Test methods for non-recoverability elongation of blanket Obsolete FZ/T 60008-1992

PDF similar to FZ/T 60008-2019


Standard similar to FZ/T 60008-2019

QB/T 3000   FZ/T 60003   FZ/T 60005   FZ/T 61011   FZ/T 25006   FZ/T 60007   

Basic data

Standard ID FZ/T 60008-2019 (FZ/T60008-2019)
Description (Translated English) Test method for non-recoverable extension of blanket
Sector / Industry Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard W56
Classification of International Standard 59.080
Word Count Estimation 5,515
Date of Issue 2019
Date of Implementation 2020-07-01
Issuing agency(ies) Ministry of Industry and Information Technology of the People's Republic of China
Summary This standard specifies the test method for non-recoverable elongation of felts. This standard applies to woven blankets, other wool woven fabrics can be implemented by reference.

FZ/T 60008-2019: Test method for non-recoverable extension of blanket

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for non-recoverable extension of blanket ICS 59.080 W56 People's Republic of China Textile Industry Standard Replace FZ/T 60008-1992 Test method for non-retractable elongation of felt Published on December 24,.2019 2020-07-01 implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces FZ/T 60008-1992 "Test Method for Non-recoverable Elongation of Blankets", which is the main technology compared with FZ/T 60008-1992 The surgical changes are as follows. --- Modified the scope of application; --- Modified the name of the normative reference file; --- Modified the precision requirements of the constant velocity elongation tensile testing machine; --- Modified the standard atmosphere for humidity control and testing; --- Modified the operating procedures; --- Combine the contents of the original standards 7.2.1 and 7.2.2 into 7.2; --- Deleted the calculation formula of non-retractable elongation L; --- Adjust the content of Chapter 10 of the original standard to Chapter 8 and Chapter 9; --- Removed Appendix B. This standard was proposed by the China National Textile and Apparel Council. This standard is under the jurisdiction of the National Textile Standardization Technical Committee Woolen Textile Branch (SAC/TC209/SC3). This standard was drafted by. Beijing Wool Textile Research Institute Inspection Center, Beijing Wool and Silk Quality Supervision and Inspection Station. The main drafters of this standard. Li Tao, Han Jing, Yan Yujiang, Wang Xiang. The previous versions of the standard replaced by this standard are as follows. --- FZ/T 60008-1992. Test method for non-retractable elongation of felt

1 Scope

This standard specifies the test method for the non-retractable elongation of felt. This standard applies to woven blankets, other wool woven fabrics can be implemented by reference.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document. GB/T 6529 Standard atmosphere for humidity control and testing of textiles GB/T 8170 Numerical Rounding Rules and Representation and Judgment of Limit Values GB/T 16825.1 Inspection of static uniaxial testing machine Part 1. Inspection and testing of tensile and/or compression testing machine force measurement system calibration

3 Principle

The sample is stretched to the specified load at an equal speed, and then returned to the starting point at the same speed. This is repeated three times. Under load conditions, after a certain period of time, the length is measured and compared with the original length to obtain the degree of non-recoverable elongation.

4 Equipment and supplies

The test equipment and supplies shall meet the following requirements. a) Constant speed elongation (CRE) tensile testing machine. 1) The test machine must have a load setting automatic stop device, the gripper stretching and returning speed is 500mm/min, and the accuracy is ± 2%. 2) Clamp. The clamping surface of the testing machine should be 75mm × 25mm, the jaw line of the clamp should be perpendicular to the tension line, and the clamping surface should be flat It is smooth and smooth. When the sample is clamped by the flat clamp and the sample cannot be prevented from slipping, the clamp with groove or engraved surface can be used. 3) Accuracy. It should meet the level 1 requirements specified in GB/T 16825.1. At any point within the full range of the instrument, indicate or record the most Vigorous error should not exceed ± 1%, and the error of indicating or recording clamp spacing should not exceed ± 1mm. b) Steel ruler (d = 1mm), colored dip pen or needle thread.

5 Atmosphere for humidity control and testing

The atmosphere for pre-conditioning, humidity adjustment and testing shall be implemented in accordance with the standard atmospheric regulations in GB/T 6529.

6 Sampling

The samples are collected according to the sampling method specified in the product standard or the method agreed by the relevant parties.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 60008-2019_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 60008-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 60008-2019_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 60008-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 60008-2019?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 60008-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.