|
US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 01151-2019: Textiles - Test method for abrasion resistance of fabrics - Accelerator method
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 01151-2019 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Textiles - Test method for abrasion resistance of fabrics - Accelerator method
| Valid |
FZ/T 01151-2019
|
PDF similar to FZ/T 01151-2019
Basic data | Standard ID | FZ/T 01151-2019 (FZ/T01151-2019) | | Description (Translated English) | Textiles - Test method for abrasion resistance of fabrics - Accelerator method | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W04 | | Classification of International Standard | 59.080.30 | | Word Count Estimation | 7,791 | | Date of Issue | 2019 | | Date of Implementation | 2020-04-01 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies a method for determining the abrasion resistance of fabrics using the accelerated friction test. This standard applies to all kinds of textile fabrics and their products. | FZ/T 01151-2019: Textiles - Test method for abrasion resistance of fabrics - Accelerator method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textiles-Test method for abrasion resistance of fabrics-Accelerator method
ICS 59.080.30
W04
People's Republic of China Textile Industry Standard
Test method for abrasion resistance of textile fabrics
Accelerated friction method
Published on November 11,.2019
2020-04-01 Implementation
Issued by the Ministry of Industry and Information Technology of the People's Republic of China
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China National Textile and Apparel Council.
This standard is under the jurisdiction of the Basic Standards Branch of the National Textile Standardization Technical Committee (SAC/TC209/SC1).
This standard was drafted by. China Textile Standard Inspection and Certification Co., Ltd., Jiangxi Provincial Down Product Quality Supervision and Inspection Center, Anhui Tianshou
Textile Technology Group Co., Ltd., National Textile Product Quality Supervision and Inspection Center.
The main drafters of this standard. Li Qiuyan, Cai Rui, Han Yuru, Lu Pengfei, Ma Shuang, He Jie, Li Fei, Liu Zhenrui.
Test method for abrasion resistance of textile fabrics
Accelerated friction method
1 Scope
This standard specifies the method for determining the wear resistance of fabrics using accelerated friction tests.
This standard applies to various textile fabrics and their products.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 6529 Standard atmosphere for humidity control and testing of textiles
3 Principle
Under the specified conditions, load the sample into the test instrument with the abrasive attached to the inner wall and the rotor installed.
Specify the time so that the front and back of the sample are fully impacted and repeatedly contact with the test box wall, according to the quality of the sample before and after wear
Calculate the mass loss rate.
4 Instruments, tools and materials
4.1 Accelerated friction tester
4.1.1 Test warehouse (as shown in Figure 1).
4.1.2 Rotor. Slender S-shaped, length is (114 ± 2) mm, thickness is (3.0 ± 0.5) mm, speed is in the range of 0 ~ 4000r/min
Adjustable (as shown in Figure 2 ~ Figure 4).
4.1.3 Polyurethane foam lining. the thickness is (3.2 ± 0.1) mm. After testing 12 samples (4 groups of samples), the lining needs to be replaced.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 01151-2019_English be delivered?Answer: Upon your order, we will start to translate FZ/T 01151-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 01151-2019_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 01151-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|