|
US$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 01115-2012: Test method of roughness behaviour for fabric surface
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 01115-2012 | English | 149 |
Add to Cart
|
3 days [Need to translate]
|
Test method of roughness behaviour for fabric surface
| Valid |
FZ/T 01115-2012
|
PDF similar to FZ/T 01115-2012
Basic data | Standard ID | FZ/T 01115-2012 (FZ/T01115-2012) | | Description (Translated English) | Test method of roughness behaviour for fabric surface | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W04 | | Classification of International Standard | 59.080.30 | | Word Count Estimation | 6,684 | | Quoted Standard | GB/T 6529 | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the performance of the fabric surface roughness measurement method. This standard applies to fabrics and products. | FZ/T 01115-2012: Test method of roughness behaviour for fabric surface---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method of roughness behaviour for fabric surface
ICS 59.080.30
W04
People's Republic of China textile industry standards
Standard Test Method for Performance of the fabric surface roughness
Issued on. 2012-12-28
2013-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Textile Industry Association.
The standard basis by the National Textile Standards Technical Committee of Standardization Technical Committee (SAC/TC209/SC1) centralized.
This standard was drafted. National Textile Products Quality Supervision and Inspection Center, Zhejiang Branch Spinning Co., Ltd. Holy Mountain.
The main drafters of this standard. Gongying Qiu, Wang Baojun, Xu Erming.
Standard Test Method for Performance of the fabric surface roughness
1 Scope
This standard specifies the method for determination of the fabric surface roughness properties.
This standard applies to fabrics and products.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6529 Textiles Standard conditioning and testing atmosphere
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
The surface roughness surfaceroughness
A microscopic level uneven surface of the fabric.
Principle 4
Under certain positive pressure and velocity conditions, the sample and the test head friction between measured and calculated surface within a certain distance of each point of the sample thickness
The degree of change.
5 apparatus and appliances
The instrument should be able to meet the following conditions, the instrument is shown in Figure 1.
a) detecting sensor using friction, friction test resolution of not less than 0.01cN, an accuracy of 0.1% and less;
b) the sample and the test head relative friction velocity of at least 60mm/min ± 2mm/min of a block, friction stroke of not less than 30mm;
c) the test head with a diameter of 0.5mm, the contact length of piano wire of 5mm;
d) the test head pressure at least 10cN a block;
e) test bench should be smooth, you can hold the specimen 200mm effective width of the sample with a tension of at least 200cN, 400cN,
600cN three options;
f) having friction during the vertical displacement of the sample and the average vertical displacement of the recording and data processing functions.
|