HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

FZ/T 01113-2012 English PDF

US$179.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 01113-2012: Test method of fabric shear property at low levels of deformation
Status: Valid

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
FZ/T 01113-2012	English	179	Add to Cart	3 days [Need to translate]	Test method of fabric shear property at low levels of deformation	Valid	FZ/T 01113-2012

PDF similar to FZ/T 01113-2012

Standard similar to FZ/T 01113-2012

FZ/T 01118 GB/T 251 GB/T 730 FZ/T 01120 FZ/T 01121 FZ/T 01123

Basic data

Standard ID	FZ/T 01113-2012 (FZ/T01113-2012)
Description (Translated English)	Test method of fabric shear property at low levels of deformation
Sector / Industry	Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard	W04
Classification of International Standard	59.080.30
Word Count Estimation	7,751
Quoted Standard	GB/T 6529
Regulation (derived from)	Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall)
Issuing agency(ies)	Ministry of Industry and Information Technology of the People's Republic of China
Summary	This standard specifies the test fabrics in small deformation under shear performance test method. This standard applies to all kinds of fabrics.

FZ/T 01113-2012: Test method of fabric shear property at low levels of deformation

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method of fabric shear property at low levels of deformation ICS 59.080.30 W04 People's Republic of China textile industry standards Standard Test Method for Shear Properties of the fabric of small deformation Issued on. 2012-12-28 2013-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Textile Industry Association. The standard basis by the National Textile Standards Technical Committee of Standardization Technical Committee (SAC/TC209/SC1) centralized. This standard was drafted. National Textile Products Quality Supervision and Inspection Center, Nissin Textile Limited. The main drafters of this standard. Wang Lixin, Wang Baojun, Lvshi Liang. Standard Test Method for Shear Properties of the fabric of small deformation

1 Scope

This standard specifies the test methods to test the fabric in small deformation under shear properties. This standard applies to all types of fabrics.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 6529 Textiles Standard conditioning and testing atmosphere

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Shear angle shearangle Shearing process two clamps to connect the center of the angle of deviation from the initial position. 3.2 Shear stiffness shearrigidity Ratio of shear stress and shear angle corresponding to the change of the sample in a small deformation range, is numerically equal to the predetermined cut shear curve Closest to the slope of the linear portion within the angular range. 3.3 Shear lag from shearhysteresis Sample shear deformation, the difference between the shear stress and shear in reply to a predetermined shear angle. Principle 4 Both ends of the sample holder, so that the movable gripper moves in a direction parallel to the clamping line (see Figure 1) the sample is cut, when the shear angle increases from zero Was added to a predetermined angle, the movable gripper at the same speed returns to the initial position and continue to move in the opposite direction; when the shear angle increases from zero to Opposition To a predetermined angle, the movable gripper at the same speed returns to the initial position to complete a cycle, to obtain a sample shear stress - shear angle relationship song Chart, whereby the sample is calculated from the shear stiffness and shear lag. Note. In general, the greater the shear stiffness of the fabric, the better ability to resist deformation, shear lag from the smaller, the better the ability to reply.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 01113-2012_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 01113-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 01113-2012_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 01113-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.