Chinese Standard: 'FZ/T 01101-2008'
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | Related Standard |
| FZ/T 01101-2008 | English | 269 |
Add to Cart
|
Days<=3
|
Textile test method. Fiber content. Quantitative physical analysis
| Valid |
FZ/T 01101-2008
|
| FZ/T 01101-2008 | Chinese | 14 |
Add to Cart
|
<=1-day
|
[PDF from Chinese Authority, or Standard Committee, or Publishing House]
| |
|
| Standard ID | FZ/T 01101-2008 (FZ/T01101-2008) | | Description (Translated English) | Textile test method. Fiber content. Quantitative physical analysis | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W04 | | Classification of International Standard | 59.080.01 | | Word Count Estimation | 11,147 | | Date of Issue | 2008-04-23 | | Date of Implementation | 2008-10-01 | | Quoted Standard | GB/T 8170; GB/T 9994; FZ/T 01057.7 | | Adopted Standard | AATCC 20A-2005 | | Drafting Organization | Quality and Technical Supervision Inspection Institute, Hangzhou | | Administrative Organization | Household Textile Industry Standardization Technical Committee | | Regulation (derived from) | NDRC Notice No. 28 of 2008 | | Proposing organization | China Textile Industry Association | | Issuing agency(ies) | National Development and Reform Commission | | Summary | This standard specifies the physical analysis methods (including microscopic determination and hand split method) Determination of textile fiber content of the conditions and detailed analysis of the steps. This standard applies to hand- split or chemical analysis methods should not be used blended, mixed and intertwined bulk fiber textile products and quantitative analysis of the fiber content of raw materials, does not apply to special animal fiber blended products. | FZ/T 01101-2008
Textile test method.Fiber content.Quantitative physical analysis
ICS 59.080.01
W04
People's Republic of China textile industry standards
Textiles - Determination of the fiber content of physical law
Posted 2008-04-23
2008-10-01 implementation
National Development and Reform Commission, People's Republic of China released
Foreword
The criterion-referenced U.S. AATCC20A.2005 "Fiber quantitative analysis" in the development of relevant content.
The Standard Appendix A, Appendix B is an informative annex.
The standard proposed by China Textile Industry Association.
This standard by the home textiles industry Standardization Technical Committee.
This standard was drafted. Hangzhou Quality and Technical Supervision and Inspection Institute, Hangzhou appearance known bedding Ltd., Jiangsu textile product quality supervision
Governor Testing Center (Jiangsu Fibre Inspection).
The main drafters of this standard. Gu Hongfeng, Li Li, Xu Chun, Li Hui.
This standard was first published.
Textiles - Determination of the fiber content of physical law
1 Scope
This standard specifies the method of physical analysis (including measuring microscope and manual split method) Determination of the conditions and details of textile fiber content
Fine analysis step.
This standard applies to be split by hand or should not be used for chemical analysis of blended, mixed and intertwined loose fiber textile products and raw materials
The quantitative analysis of the fiber content, does not apply to special animal fiber mixtures.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 8170 numerical rounding rules
GB/T 9994 Textile material moisture regain
FZ/T 01057.7 Test method for identification of textile fibers Part 7. Density gradient method
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Circular in cross section fibers of circular or approximately, by measuring the diameter of the fiber cross-sectional area calculation, to calculate the volume.
3.2
Fiber cross-section of non-circular, polygonal, irregular shape, etc., can be measured by scanning the fiber cross-sectional area or other means, to calculate
The volume.
3.3
The particular shape of the fiber cross section hole, porous and other difficult by measuring the diameter, cross-section and so calculate the actual volume.
3.4
Sample some quality fiber (derived by multiplying the volume by weighing or known density) percent of the total mass of fiber.
3.5
Sample volume of certain percentage of all fibers in fiber volume.
3.6
Samples of the number of fibers some percentage of all number of fibers.
Principle 4
4.1 manual methods of resolution. For the visually distinguish able to distinguish fiber, split by hand, dried and weighed to calculate the mass of fiber
|