FZ/T 01091: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 01091-2008 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Textiles. Woven fabrics. Construction. Methods of analysis. Determination of crimp of yarn in fabric
| Obsolete |
FZ/T 01091-2008
|
| FZ/T 01091-1999 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Textiles. Woven fabrics. Construction. Methods of analysis. Determination of crimp or take-up of yarn in fabric
| Obsolete |
FZ/T 01091-1999
|
PDF similar to FZ/T 01091-2008
Basic data | Standard ID | FZ/T 01091-2008 (FZ/T01091-2008) | | Description (Translated English) | Textiles. Woven fabrics. Construction. Methods of analysis. Determination of crimp of yarn in fabric | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W04 | | Classification of International Standard | 59.080.30 | | Word Count Estimation | 6,681 | | Date of Issue | 2008-04-23 | | Date of Implementation | 2008-10-01 | | Older Standard (superseded by this standard) | FZ/T 01091-1999 | | Quoted Standard | GB 6529 | | Adopted Standard | ISO 7211-3-1984, MOD | | Regulation (derived from) | NDRC Notice No. 28 of 2008 | | Issuing agency(ies) | National Development and Reform Commission of the People's Republic of China | | Summary | This standard specifies the determination of yarn in fabric shrinkage approach. This standard applies to most of the woven fabric, does not apply in certain straight yarn tension can not eliminate the curl, as well as weaving, finishing, and the method of analysis of the process of the destruction of the fabric yarns. | FZ/T 01091-2008: Textiles. Woven fabrics. Construction. Methods of analysis. Determination of crimp of yarn in fabric
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textiles. Woven fabrics. Construction. Methods of analysis. Determination of crimp of yarn in fabric
ICS 59.080.30
W04
People's Republic of China textile industry standards
Replacing FZ/T 01091-1999
Woven fabric structure analysis method
Determination of yarn in fabric shrinkage
(ISO 7211-3. 1984, MOD)
Posted 2008-04-23
2008-10-01 implementation
National Development and Reform Commission, People's Republic of China released
Foreword
This revised standard adopts ISO 7211-3. 1984 "textile fabric structure analysis machines - Part 3. reduction of the woven fabric
Determination. "
This standard is based on ISO 7211-3. 1984 redrafted, and ISO 7211-3. 1984 The main differences are as follows.
1. As part of the introduction of the principles of Chapter 3 of the comment.
2. Normative references are replaced by the corresponding international standards to national standards.
3. The table in Appendix A straight tension incorporated within 8.1.
4. In Chapter 7, the sample increased on jacquard fabric sample comments.
Instead of the standard FZ/T 01091-1999 "woven fabrics structure analysis method of yarn in fabric shrinkage determination."
Compared with this standard FZ/T 01091-1999, the main changes the following technical content.
1. The original 3.1 to 3.5 5 to simplify terminology weave a term shrinkage.
2. 250mm length of the sample by the amended to "the specimen clamp 20 times the length."
3. Remove the fabric shrinkage formula (1).
4. The table in Appendix A straight tension incorporated within 8.1.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee based textile branch (SAC/TC209/SC1) centralized.
This standard was drafted. Textile Industry Standardization Institute, Xi'an University of Engineering.
The main drafters. Zhang one, Zheng Yuying.
This standard was first published in 1988, the standard number is GB/T 8679 - 1988, 1999 Adjustment for the textile industry standard, numbered
FZ/T 01091-1999, this is the first revision.
Woven fabric structure analysis method
Determination of yarn in fabric shrinkage
1 Scope
This standard specifies the determination of yarn in fabric shrinkage method.
This standard applies to most woven fabrics, does not apply in certain straight crimped yarn tension can not be eliminated, as well as weaving, whole
Processing and analysis of the method of yarn fabric damaged.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 6529 textiles conditioning and testing - Standard atmospheres
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Stretched length of yarn in the fabric and the percentage difference between the distance of the yarn ends of the latter.
3.2
Eliminate curl weaving tension caused by the minimum force applied to the yarn.
Principle 4
Remove from the fabric strip like a known length of yarn, under tension to make it straight and measure its length in this state, to weave shrink
Rate shows the result. The size of the yarn tension according to the type and linear density selection.
Note. This method required a tension crimped yarn straight. In theory, this tension should be to eliminate all without crimped yarn elongation, but actually difficult to achieve.
Therefore, the tension given in Table 1, which are designed to stretch between the inevitable and does not completely eliminate curl balance, any residual curl
It is negligible.
5 device
5.1 straight yarn and measuring devices, subject to the following requirements.
a) shall have two clamps and clamp in a closed surface with parallel jaws;
b) the distance between the two clamps can vary;
c) should be able to measure the distance between the two clamps, the minimum scale is millimeters (mm);
d) Each clamp shall have a baseline, you can see when the clamp is closed;
Straight tension e) can specified by a clamp applied to the yarn.
5.2 ruler. minimum scale is millimeters (mm).
5.3 Analysis of the needle.
|