HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

FZ/T 01081-2018 English PDF

US$119.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 01081-2018: Testing method for coating weight of fusible interlinings
Status: Valid

FZ/T 01081: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
FZ/T 01081-2018	English	119	Add to Cart	2 days [Need to translate]	Testing method for coating weight of fusible interlinings	Valid	FZ/T 01081-2018
FZ/T 01081-2009	English	239	Add to Cart	3 days [Need to translate]	Testing method for coating weight and uniform for fusible interlinings	Obsolete	FZ/T 01081-2009
FZ/T 01081-2000	English	239	Add to Cart	2 days [Need to translate]	Determination of coating weight and uniform for fusible interlinings	Obsolete	FZ/T 01081-2000
FZ/T 01081-1999	English	RFQ	ASK	3 days [Need to translate]	(Chinese Industry Standard)	Obsolete	FZ/T 01081-1999

PDF similar to FZ/T 01081-2018

Standard similar to FZ/T 01081-2018

GB/T 6097 FZ/T 10007 FZ/T 01085 FZ/T 01076 FZ/T 01078 FZ/T 01077

Basic data

Standard ID	FZ/T 01081-2018 (FZ/T01081-2018)
Description (Translated English)	Testing method for coating weight of fusible interlinings
Sector / Industry	Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard	W10
Classification of International Standard	59.080.01
Word Count Estimation	5,576
Date of Issue	2018-04-30
Date of Implementation	2018-09-01
Older Standard (superseded by this standard)	FZ/T 01081-2009
Quoted Standard	GB/T 6284; GB/T 6529; GB/T 8170
Regulation (derived from)	Ministry of Industry and Information Technology Announcement No. 23 of 2018
Issuing agency(ies)	Ministry of Industry and Information Technology of the People's Republic of China

FZ/T 01081-2018: Testing method for coating weight of fusible interlinings

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Testing method for coating weight of fusible interlinings ICS 59.080.01 W10 People's Republic of China Textile Industry Standard Replacing FZ/T 01081-2009 Test method for coating amount of adhesive lining hot melt adhesive Published on.2018-04-30 2018-09-01 implementation Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces FZ/T 01081-2009 "Hot-melt adhesive lining hot melt adhesive coating amount and coating uniformity test method", and Compared with FZ/T 01081-2009, the main technical contents are changed as follows. --- The standard name is adjusted to "Test method for coating thickness of adhesive lining hot melt adhesive"; --- Increased the type of hot melt adhesive and dissolved reagents; --- Adjusted the sample constant weight mode, supplemented the recommended drying temperature; --- Adjusted the result calculation method. This standard was proposed by the China National Textile and Apparel Council. This standard is under the jurisdiction of the National Textile Standardization Technical Committee Cotton Textile Subcommittee (SAC/TC209/SC10). This standard was drafted. Shanghai Tianyang Hot Melt Bonding Material Co., Ltd., Shanghai Textile Industry Technology Supervision Institute, Shanghai Tianqiangfang Weaving Co., Ltd., Nantong Haihui Technology Development Co., Ltd., Huate Bonding Materials Co., Ltd., Qihe New Materials Technology (Jiashan) Co., Ltd. Division, China Industrial Textiles Industry Association, Shanghai Textile Group Testing Standards Co., Ltd. The main drafters of this standard. Li Zhelong, Wang Xiaozhong, Zhang Baoqing, Li Meng, Cao Ping, Chen Yu, Luo Ming, Li Guimei, Niu Deshun, Qin Wei. The previous versions of the standards replaced by this standard are. ---GB/T 11399-1989; ---FZ/T 01081-1999, FZ/T 01081-2000, FZ/T 01081-2009. Test method for coating amount of adhesive lining hot melt adhesive

1 Scope

This standard specifies the test method for the amount of hot-melt adhesive coating. This standard is applicable to the lining of woven fabrics, knitted fabrics and non-woven fabrics of various materials. This standard does not apply to laminates where the base fabric is not solvent resistant and results in a significant impact on the test results.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 6284 General method for moisture determination in chemical products - Dry reduction method GB/T 6529 Standard atmosphere for textile conditioning and testing GB/T 8170 Numerical Rounding Rules and Representation and Determination of Limit Values

3 Principle

The amount of the hot-melt adhesive of the adhesive liner is calculated by dissolving the hot-melt adhesive of the adhesive liner with a suitable organic solvent.

4 equipment and appliances

4.1 Distillation reflux unit. 4.2 Constant temperature water bath. 4.3 Constant temperature oil bath. 4.4 Analytical balance. The sensitivity is 0.001g. 4.5 Grinding Triangular Flask. 500 mL. 4.6 Suitable scribers or cutting scissors.

5 reagent preparation

5.1 Copolyamide (COPA) hot melt adhesive using solvent. methanol or methanol. chloroform is 1.1 (analytical grade). Note. In the actual test process, if it is found that the solvent is insoluble or the data is abnormal after the solvent treatment, it is recommended to use methanol. chloroform 1.1 solvent. 5.2 Polyethylene (PE) hot melt adhesive uses solvent. dichlorobenzene or tetrachloroethylene (analytical grade). 5.3 Copolyester (COPES) hot melt adhesive uses solvent. tetrahydrofuran or trichloroethylene (analytical grade). Note. In the actual test process, if it is found that the solvent is insoluble or the data is abnormal after the solvent treatment, it is recommended to use tetrahydrofuran solvent. 5.4 Ethylene-vinyl acetate (EVA) hot melt adhesive using solvent. trichloroethylene (analytical grade). 5.5 Polyurethane (TPU) hot melt adhesive uses solvent. chloroform (analytical grade). 5.6 The two hot melt adhesives are dissolved in two soluble solvents. 5.7 The new hot melt adhesive can be selected with the appropriate solvent.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 01081-2018_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 01081-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 01081-2018_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 01081-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 01081-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 01081-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.