FZ/T 01076-2019 PDF English
US$229.00 · In stock · Download in 9 secondsFZ/T 01076-2019: Making method for composite specimen of fusible interlinings Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid FZ/T 01076: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| FZ/T 01076-2019 | English | 229 |
Add to Cart
|
3 days
|
Making method for composite specimen of fusible interlinings
| Valid |
| FZ/T 01076-2010 | English | 279 |
Add to Cart
|
3 days
|
Making method for composite specimen of dimensional change of fusible interlinings
| Obsolete |
| FZ/T 01076-2000 | English | 199 |
Add to Cart
|
2 days
|
Making method of composite specimen of fusible interlinings for garments
| Obsolete |
| FZ/T 01076-1999 | English | RFQ |
ASK
|
3 days
|
(Chinese Industry Standard)
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: FZ/T 01076-2019
FZ/T 01076-2019: Making method for composite specimen of fusible interlinings---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/FZT01076-2019
Making method for composite specimen of fusible interlinings
ICS 59.080.01
W10
People's Republic of China Textile Industry Standard
Replacing FZ/T 01076-2010
Method for preparing adhesive lining combined sample
Published on.2019-05-02
2019-11-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces FZ/T 01076-2010 "Method for making hot-melt adhesive lining dimensional change combination sample", and FZ/T 01076-2010
Compared to the main technical changes are as follows.
--- Adjust the standard name to "manufacturing method of bonded lining combination sample";
--- The standard range is adjusted to the method of making the combined sample made of the adhesive lining and the standard fabric, and the appearance and dimensional changes are deleted;
--- Added a chapter on terms and definitions; in the chapter on the bonded liner sample, the content of the adhesive liner sample category is added;
--- Supplemented the standard fabric requirements and pressing conditions of the relevant adhesive lining, and adjusted the temperature range of the shirt lining pressing;
--- Removed dimension content.
This standard was proposed by the China National Textile and Apparel Council.
This standard is under the jurisdiction of the National Textile Standardization Technical Committee Cotton Textile Subcommittee (SAC/TC209/SC10).
This standard was drafted. Weibosite Interlining (Nantong) Co., Ltd., Shanghai Textile Industry Technical Supervision Institute, Zhejiang Jinsanfa Adhesive Lining
Co., Ltd., Qihe New Materials Technology (Jiashan) Co., Ltd., Nantong Jianghuai Interlining Co., Ltd., Shanghai Tianqiang Textile Co., Ltd., China Industry
Textile Industry Association.
The main drafters of this standard. Shen Rong, Jiang Qian, Zhang Baoqing, Wang Aiqin, Lu Zhonglei, Liu Feng, Li Meng, Li Guimei, He Jianyuan.
The previous versions of the standards replaced by this standard are.
---GB/T 1139-1989;
---FZ/T 01076-1999, FZ/T 01076-2000, FZ/T 01076-2010.
Method for preparing adhesive lining combined sample
1 Scope
This standard specifies the method for making a combined sample of a bonded backing and a standard fabric.
This standard is applicable to the lining of woven fabrics, knitted fabrics and non-woven fabrics as base fabrics. Other adhesive linings can be referred to.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 5326 combed polyester-cotton blended printing and dyeing cloth
GB/T 6529 Standard atmosphere for textile conditioning and testing
GB/T 8628 Preparation, marking and measurement of fabric samples and garments in the test for dimensional change of textiles
GB/T 8629-2017 Home washing and drying procedures for textile testing
GB/T 8630 Determination of dimensional changes after washing and drying of textiles
GB/T 17253 synthetic fiber fabric
GB/T 22848 knitted finished fabric
Standard bleaching cotton cloth for GB/T 25812 dye test
FZ/T 01082 Test method for dry heat dimensional change of adhesive lining
FZ/T 13001 dyed denim
FZ/T 24002 combed wool
FZ/T 24003 carded wool
FZ/T 24004 combed low-wool blended and purified cilia
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Standard fabric standardfabric
Specifications and quality, etc., in accordance with the standard, for the fabric of the sample combined with the adhesive liner.
4 Principle
On the side of the adhesive lining coated with hot melt adhesive, covered with a suitable standard fabric, placed in a press, at specified temperature, pressure and time bars
The parts are pressed and pressed to form a combined sample of the adhesive lining and the standard fabric.
5 equipment and appliances
5.1 Pressing machine. The temperature can be adjusted between 0 °C and.200 °C, the temperature accuracy is ±2 °C; the pressure of the press can be adjusted, and one can be applied.
FZ/T 01076-2019
Making method for composite specimen of fusible interlinings
ICS 59.080.01
W10
People's Republic of China Textile Industry Standard
Replacing FZ/T 01076-2010
Method for preparing adhesive lining combined sample
Published on.2019-05-02
2019-11-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces FZ/T 01076-2010 "Method for making hot-melt adhesive lining dimensional change combination sample", and FZ/T 01076-2010
Compared to the main technical changes are as follows.
--- Adjust the standard name to "manufacturing method of bonded lining combination sample";
--- The standard range is adjusted to the method of making the combined sample made of the adhesive lining and the standard fabric, and the appearance and dimensional changes are deleted;
--- Added a chapter on terms and definitions; in the chapter on the bonded liner sample, the content of the adhesive liner sample category is added;
--- Supplemented the standard fabric requirements and pressing conditions of the relevant adhesive lining, and adjusted the temperature range of the shirt lining pressing;
--- Removed dimension content.
This standard was proposed by the China National Textile and Apparel Council.
This standard is under the jurisdiction of the National Textile Standardization Technical Committee Cotton Textile Subcommittee (SAC/TC209/SC10).
This standard was drafted. Weibosite Interlining (Nantong) Co., Ltd., Shanghai Textile Industry Technical Supervision Institute, Zhejiang Jinsanfa Adhesive Lining
Co., Ltd., Qihe New Materials Technology (Jiashan) Co., Ltd., Nantong Jianghuai Interlining Co., Ltd., Shanghai Tianqiang Textile Co., Ltd., China Industry
Textile Industry Association.
The main drafters of this standard. Shen Rong, Jiang Qian, Zhang Baoqing, Wang Aiqin, Lu Zhonglei, Liu Feng, Li Meng, Li Guimei, He Jianyuan.
The previous versions of the standards replaced by this standard are.
---GB/T 1139-1989;
---FZ/T 01076-1999, FZ/T 01076-2000, FZ/T 01076-2010.
Method for preparing adhesive lining combined sample
1 Scope
This standard specifies the method for making a combined sample of a bonded backing and a standard fabric.
This standard is applicable to the lining of woven fabrics, knitted fabrics and non-woven fabrics as base fabrics. Other adhesive linings can be referred to.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 5326 combed polyester-cotton blended printing and dyeing cloth
GB/T 6529 Standard atmosphere for textile conditioning and testing
GB/T 8628 Preparation, marking and measurement of fabric samples and garments in the test for dimensional change of textiles
GB/T 8629-2017 Home washing and drying procedures for textile testing
GB/T 8630 Determination of dimensional changes after washing and drying of textiles
GB/T 17253 synthetic fiber fabric
GB/T 22848 knitted finished fabric
Standard bleaching cotton cloth for GB/T 25812 dye test
FZ/T 01082 Test method for dry heat dimensional change of adhesive lining
FZ/T 13001 dyed denim
FZ/T 24002 combed wool
FZ/T 24003 carded wool
FZ/T 24004 combed low-wool blended and purified cilia
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Standard fabric standardfabric
Specifications and quality, etc., in accordance with the standard, for the fabric of the sample combined with the adhesive liner.
4 Principle
On the side of the adhesive lining coated with hot melt adhesive, covered with a suitable standard fabric, placed in a press, at specified temperature, pressure and time bars
The parts are pressed and pressed to form a combined sample of the adhesive lining and the standard fabric.
5 equipment and appliances
5.1 Pressing machine. The temperature can be adjusted between 0 °C and.200 °C, the temperature accuracy is ±2 °C; the pressure of the press can be adjusted, and one can be applied.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of FZ/T 01076-2019 be delivered?Answer: The full copy PDF of English version of FZ/T 01076-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of FZ/T 01076-2019_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 01076-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- FZ/T 01076-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version FZ/T 01076-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 01076-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of FZ/T 01076-2019?A step-by-step guide to download PDF of FZ/T 01076-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "FZ/T 01076-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|