Chinese Standard: 'FZ/T 010402014'
Standard ID  Contents [version]  USD  STEP2  [PDF] delivered in  Standard Title (Description)  Status  Related Standard 
FZ/T 010402014  English  139 
Add to Cart

Days<=3

Textiles. Twist factor related to the Tex System
 Valid 
FZ/T 010402014

FZ/T 010402014  Chinese  14 
Add to Cart

<=1day

[PDF from Chinese Authority, or Standard Committee, or Publishing House]
 

FZ/T 010402014  Click to view similar PDF/Books...
Detail Information of FZ/T 010402014; FZ/T010402014 Description (Translated English): Spinning & Textile Industry Standard Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W04 Classification of International Standard: 59.080.20 Word Count Estimation: 6,621 Date of Issue: 10/14/2014 Date of Implementation: 4/1/2015 Older Standard (superseded by this standard): FZ/T 010401995 Adopted Standard: ISO/TR 80911983, MOD Drafting Organization: China Textile Standard (Beijing) Co., Inspection and Certification Center Administrative Organization: National Textile basic standards Standardization Technical Committee Technical Committee Regulation (derived from): People's Republic of China Ministry of Industry and Information Technology Notice 2014 No. 63; Industry Standard Filing Notice 2014 No. 12 (Overall No. 180) Proposing organization: China Textile Industry Federation Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This Standard specifies the formulas associated with Tex system twist coefficient expressed in SI units, as well as the relationship between conversion and conversion factors twist factor twist factor SI units and other units commonly expressed in units o
FZ/T 010402014
Textiles.Twist factor related to the Tex System
ICS 59.080.20
W04
People's Republic of China textile industry standards
Replacing FZ/T 010401995
Textiles Turks (Tex) system twist multiplier
(ISO /T R80911983, MOD)
Issued on: 20141014
20150401 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.12009 given rules.
Instead of the standard FZ/T 010401995 "Tex system twist factor." Compared with the FZ/T 010401995 major changes are as follows:
 Standard name was changed to "textile Turks (Tex) manufactured twist factor";
 Chapter 2 original standard references adjusted by reference, successively postponed later chapters;
 Increasing the twist, twist of terms and definitions, revised the definition of twist factor (see Chapter 2, Chapter 3 of the 1995 edition);
 Remove the twist factor and the related calculation formula αk represented (see Chapter 3, Chapter 4, 1995 edition);
 Remove the conversion formula and αk associated (see Chapter 4, Chapter 5, 1995 edition);
 Fixed conversion coefficient table section will αm 'corrected to αm, remove the related αk conversion factor (see Chapter 5, 1995
Chapter 6 edition);
 Note 2 in Table 1 metric twist unit "twist/10cm" was changed to "twist/m", delete the Note 3.
This standard uses the redrafted law revision using ISO /T R8091: 1983 "Textiles Tex system twist multiplier" (in English). The standard
The main difference between quasiISO /T R8091 as follows:
 The reference international standard adjustment of the corresponding standards, and added GB/T 3291.1;
 Chapter 2 adds the twist, twist the definition;
 Chapter 5 in terms of the relationship between an increase in note 1, "of the results of rounding conversion factor Description" and Note 2 of the "Metric and inch twist factor
The formula ";
 Remove the original international standard Chapter 7 twist multiplier unit conversion table and Chapter 8 twist factor conversion table.
The standard proposed by China Textile Industry Association.
The standard basis by the National Textile Standards Technical Committee of Standardization Technical Committee (SAC/TC209/SC1) centralized.
This standard was drafted: Textile Standard (Beijing) Co., Inspection and Certification Center.
The main drafters of this standard: Gongying Qiu, Liu Tao, Fang Xijiang.
This standard replaces the standards previously issued as follows:
 FZ/T 010401995.
Textiles Turks (Tex) system twist multiplier
1 Scope
This standard specifies the calculation formula and Tex system twist multiplier related to SI units, and other units common
Conversion relation and conversion factors twist factor twist factor and SI units system units represented.
This standard applies to all kinds of twisted staple yarn, filament yarn, strands and cables.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1
Twist turn
Yarn about its axis of rotation is a 360 ° twist.
[GB/T 3291.11997, the definition 2.39]
2.2
Twist twist
The number of yarn twist in a predetermined length in front of the untwisting. Usually per meter twist count or the number of twists per centimeter represented.
[GB/T 3291.11997, the definition 2.40]
2.3
Twist factor twistfactor
Fiber or filament yarn metric helical orientation, which reflects the perspective of the same fiber yarn axis on the surface of the yarn by yarn linear density
Degree twist and two indicators obtained.
3 to Tex system twist multiplier expressed
The formula twist factor see formula (1) and (2):
αt =
100 Tt
Or T
Tt
(1)
αm =
100 10Tt
Or T
Tt
(2)
Where:
αt  Tex system twist coefficient expressed;
αm  twist multiplier expressed in metric;
The T  twist, twist per unit of m (twists/m);
Tt  line density in tex (tex).
4 αt, the relationship between αm
Relationship αt, αm between Eq. (3) or (4):
