Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169759 (Oct 25, 2020)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	Related Standard
FZ/T 01030-2016	English	159	Add to Cart	Days<=3	Knitted fabric and elastic woven fabric - Determination of maximum force to seam rupture and bursting distension - Bursting method	Valid	FZ/T 01030-2016
FZ/T 01030-2016	Chinese	16	Add to Cart	<=1-day	[PDF from Chinese Authority, or Standard Committee, or Publishing House]

FZ/T 01030-2016
Knitted fabric and elastic woven fabric - Determination of maximum force to seam rupture and bursting distension - Bursting method
ICS 59.080.30
W04
People 's Republic of China textile industry standards
Replacing FZ/T 01030-1993
Knitted fabrics and elastic woven fabrics
Seam strength and expansion of the determination of the top break method
seamrupture and burstingdistension-Burstingmethod
2016-04-05 release
2016-09-01 implementation
Issued by the Ministry of Industry and Information Technology of the People 's Republic of China
Preface
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces FZ/T 01030-1993 "Determination of strength and expansibility of joints and elastic woven fabrics"
FZ/T 01030-1993, the main changes are as follows.
- the scope of the increase "does not apply to the larger bending of the joints", delete the "This standard does not apply to high elastic fabric";
- the reference to GB 7742 and GB 5708 in the normative reference document of Chapter 2 was deleted;
- the definition of "straight (to) to seams" and "crosses" to "joints" in Chapter 3, the terms "
(Strength) "and its definition;
--- modified 5.1 method A in the instrument requirements, clamping device diameter to 45mm ± 0.5mm, the ball diameter changed to
38mm ± 0.2mm;
--- refinement of the 5.2 method B in the diaphragm burst strength tester requirements;
--- increase the 5.3,5.4 standard testing required for the sewing, cutting equipment;
--- simplifies the requirements of the atmosphere of Chapter 6 humidity control and testing, and removes the requirement for the humidity of the sample;
- the removal of the old standard "Chapter 7 requirements for sampling";
- the size of the specimen is modified, "the diameter of the specimen shall not be less than the outer diameter of the ring gripping device used"
--- delete the Appendix A, the relevant provisions of the sewing regulations, modified to 7.2 in accordance with the provisions of the agreement under the conditions of the preparation of the sample;
--- Added 8.1.4 Method A The request to record the plunger displacement device to zero when the plunger was in contact with the specimen;
- the reasons for the breakdown of 8.1.7 and 8.2.6 specimens were refined and the selection of the results was made;
--- modified 9.2.1 The seam strength unit in method B is expressed in kPa and the result is reduced to about 1 kPa;
- a) the number of this standard has been added to Chapter 10 of the Test Report;
- The requirements for the sampling of the finished product of Appendix B are deleted.
This standard is proposed by China Textile Industry Federation.
This standard by the National Textile Standardization Technical Committee of the basic standard sub-technical committee (SAC/TC209/SC1) centralized.
The drafting of the standard unit. in the spinning standard (Beijing) Inspection and Certification Center Limited.
The main drafters of this standard. Wu Jianchun, Xu Lu, Wang Ying, Han Yuru.
This standard replaced the previous version of the standard release.
--- FZ/T 01030-1993.
Knitted fabrics and elastic woven fabrics
Seam strength and expansion of the determination of the top break method
1 Scope
This standard specifies two types of top break test methods for determining the strength of joints and the penetration of the roof. Method A is the ball top breaking method;
Method B is the film expansion method.
This standard applies to knitted fabrics and elastic woven fabrics.
This standard applies to straight seams and does not apply to larger curved joints.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 6529 Standard atmosphere for textiles for humidity control and testing
Representation and Judgment of Numerical Correction Rule and Limit Value of GB/T 8170
3 terms and definitions
The following terms and definitions apply to this document.
3.1
Straight (by) to the seam wale (warp) seam
A seam that is straight to the fabric.
3.2
(Weft) to the seam course (weft) seam
Perpendicular to the fabric (latitude) to the seam from the seam.
3.3
Continuous strength (strength) to maximum strength (strength) toseamrupture
Under the specified conditions, a sample containing a seam is applied with a pressure perpendicular to the plane of the specimen until the maximum
Pressure (pressure).
Note. steel ball break method for the seams strong, film bursting method for the seam strength.
3.4
Breaking (bursting) burstingdistension (distensionatburst)
The maximum degree of expansion of the specimen in the center of the specimen at the time of test is expressed in millimeters (mm).
4 principle
Use a ring holder of a specified size to hold a sample containing a seam so that the seam passes through the center of the holder, a spherical body to the specimen
The side of the vertical pressure, until the sample rupture.

Related standard:   FZ/T 01026-2017  FZ/T 01028-2016
Related PDF sample:   FZ/T 01026-2017  GB/T 5714-2019