|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 01004-2008: Coated fabrics. Determination of resistance to penetration by water
Status: Valid FZ/T 01004: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 01004-2008 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
Coated fabrics. Determination of resistance to penetration by water
| Valid |
FZ/T 01004-2008
|
| FZ/T 01004-1991 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Coated Fabrics - Determination of Resistance to Penetration by Water (Hydrostatic Test)
| Obsolete |
FZ/T 01004-1991
|
PDF similar to FZ/T 01004-2008
Basic data | Standard ID | FZ/T 01004-2008 (FZ/T01004-2008) | | Description (Translated English) | Coated fabrics. Determination of resistance to penetration by water | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W04 | | Classification of International Standard | 59.080.40 | | Word Count Estimation | 5,572 | | Date of Issue | 2008-04-23 | | Date of Implementation | 2008-10-01 | | Older Standard (superseded by this standard) | FZ/T 01004-1991 | | Quoted Standard | GB 6529; GB/T 8170-1987; GB 9994-1988 | | Adopted Standard | ISO 1420-2001, MOD | | Regulation (derived from) | NDRC Notice No. 28 of 2008 | | Issuing agency(ies) | National Development and Reform Commission of the People's Republic of China | | Summary | This standard specifies a fixed period of time right when the hydrostatic pressure is applied to coated fabrics, coated fabrics resistance to water determination methods. This standard applies to coated fabrics, waterproof fabric may refer to the other. | FZ/T 01004-2008: Coated fabrics. Determination of resistance to penetration by water---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Coated fabrics. Determination of resistance to penetration by water
ICS 59.080.40
W04
People's Republic of China textile industry standards
Replacing FZ/T 01004-1991
Determination of resistance to water penetration of the coated fabric
(ISO 1420.2001, Rubber-orplastics-coatedfabrics-
Determinationofresistancetopenetrationbywater, MOD)
Posted 2008-04-23
2008-10-01 implementation
National Development and Reform Commission, People's Republic of China released
Foreword
This revised standard adopts ISO 1420.2001 "Rubber or plastic coated fabrics - Determination of resistance to water."
This standard is based on ISO 1420.2001 re-drafting, and ISO 1420.2001 The main differences are as follows.
1. Normative documents of international standards to replace national standards;
2. Deleted range described specimen shape, increasing the terms "may refer to other waterproof fabric execution ';
3. Increasing the test results or not explain;
4. Increasing the final determination of hydrostatic values (6.4) and the representation of the results.
Instead of the standard FZ/T 01004-1991 "Standard Test Method for Coated Fabrics resistance to water (hydrostatic pressure test)."
This standard FZ/T 01004-1991 made the following modifications.
1. Increase the normative references;
2. Test Method consists of four into a unified;
3. The elimination of the low and high pressure test equipment instrument, to a general-purpose test equipment;
4. Increasing the specimen shape and size requirements;
5. Abolition of the "standard atmosphere" and "water" chapters, the humidity and atmospheric testing standards do not make specific provisions, the humidity will be time to at least
16h;
6. Revised test procedure;
7. Added "Test results" chapter.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee based textile branch (SAC/TC209/SC1) centralized.
This standard is drafted by. National Textile Products Quality Supervision and Inspection Center.
The main drafters of this standard. Li Chun, Lizhi En, Lister, Yan Chunhong.
This standard was first published in 1991, this revision is the first time.
Determination of resistance to water penetration of the coated fabric
1 Scope
This standard specifies the method within a fixed period of time applying hydrostatic pressure on coated fabrics, coated fabrics Determination of resistance to water.
This standard applies to coated fabrics, other waterproof fabric can be implemented by reference.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 6529 textiles conditioning and testing - Standard atmospheres
Principle 3
Under specified conditions, the test sample coated fabric side by the rising water pressure, until the pressure reaches a predetermined value. In Regulation
Given time to see if there is penetration occurred or continue pressing until penetration occurs.
4 Instrument
4.1 Summary
Instrument consists of an open container with a specimen holder device components. Bottom of the container has an inlet, and filled with room temperature water inlet pipe
Connected. Above there is a specimen sample to prevent deformation, cracking metal mesh, metal mesh aperture periphery grow up to 30mm, the straight
Made of 1.0mm ~ 1.2mm diameter wire.
4.2 Range and Accuracy
You can use a pressure gauge or manometer measuring hydrostatic pressure.
Pressure gauge. connected to the test head, the water pressure up to 19.6kPa (200cm water column) with an accuracy of ± 1%.
Pressure gauge. maximum range of at least 100kPa (1020cm water column).
4.3 Test Area
Caught in the open container of sample test area of 100cm2, that is, as the sample is a square side length 100mm, the diameter of the circular
113mm. When necessary, in order to reduce the extent of damage to the sample holder and facilitate the testing, it may be a soft rubber gasket placed in the sample holder and
Between devices. Washer hardness of about 40IRHD (international rubber hardness) and a thickness of 5 mm, a diameter of 10 mm. You can also use the density
0.045g/cm3 ~ 0.055g/cm3, a thickness of 10mm cross-linked polyethylene foam gasket.
5 Sample
5.1 Sampling
The samples shall be taken without any defects affect the test results.
5.2 Number of
Unless otherwise specified, each sample was tested five samples.
5.3 The shape and size
5.3.1 Sample Square
Each side of the square sample length of about 200mm.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 01004-2008_English be delivered?Answer: Upon your order, we will start to translate FZ/T 01004-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 01004-2008_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 01004-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version FZ/T 01004-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 01004-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|