Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169760 (Oct 17, 2020)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

FZ/T 01006-2008

Chinese Standard: 'FZ/T 01006-2008'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
FZ/T 01006-2008English209 Add to Cart Days<=3 Coated fabrics. Determination of the coating thickness Valid FZ/T 01006-2008
FZ/T 01006-2008Chinese14 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

   

BASIC DATA
Standard ID FZ/T 01006-2008 (FZ/T01006-2008)
Description (Translated English) Coated fabrics. Determination of the coating thickness
Sector / Industry Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard W04
Classification of International Standard 59.080.40
Word Count Estimation 8,859
Date of Issue 2008-04-23
Date of Implementation 2008-10-01
Older Standard (superseded by this standard) FZ/T 01006-1991
Quoted Standard GB 6529
Drafting Organization National Textile Products Quality Supervision and Inspection Center
Administrative Organization National Standardization Technical Committee based textile branch
Regulation (derived from) NDRC Notice No. 28 of 2008
Proposing organization China Textile Industry Association
Issuing agency(ies) National Development and Reform Commission
Summary This standard specifies the coated fabric with a microscope in coating thickness measurement method. This standard applies to the determination of various types of coated fabric layers in the coating thickness.

FZ/T 01006-2008
Coated fabrics.Determination of the coating thickness
ICS 59.080.40
W04
People's Republic of China textile industry standards
Replacing FZ/T 01006-1991
Coated fabric coating thickness measurement
Posted 2008-04-23
2008-10-01 implementation
National Development and Reform Commission, People's Republic of China released
Foreword
This standard is the FZ/T 01006-1991 "coated fabric coating thickness test" amendments. And FZ/T 01006-1991
Compared to the main changes are as follows.
1. Increase the reference standard GB 6529;
2. Increasing the English term;
3. The number of samples from one direction to three vertical and horizontal three each;
4. Increasing the arbitration test sample should be adjusted or special performance requirements for wet samples;
5.18 distribution measurement by 3 × 2 × 3 measurements of each sample to 3.00;
6. Added "sample sections to include the full warp buckling wave" requirement;
7. An increase of measuring the maximum thickness of the adhesive is described;
8. Deleted "When the coefficient of variation greater than 25%, resample retest once";
9. Increased "coefficient of variation C Vp value, if necessary, to calculate the measured values";
10. The result value "rounding interval 10-3" to "reserved two significant figures";
11. The original Appendix 2 (Supplementary) combined adjusted to an informative appendix;
12. Increasing the coating thickness measurement schematic site.
From the date of implementation of this standard, instead of FZ/T 01006-1991.
Appendix A of this standard is an informative annex.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee based textile branch (SAC/TC209/SC1) centralized.
This standard is drafted by. National Textile Products Quality Supervision and Inspection Center.
The main drafters of this standard. Wang Jun.
This standard was first published in 1991, this revision is the first time.
Coated fabric coating thickness measurement
1 Scope
This standard specifies the method for measuring microscopic coating fabric coating thickness.
This standard applies to all types of measuring coating thickness of the coating layers of fabric.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 6529 textiles conditioning and testing - Standard atmospheres
GB/T 8170 numerical rounding rules
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
The thickness of the coated surface of fabric layer coating material. The coating may be one or multiple layers (e.g., skin, the foam layer, the light-shielding layer, etc.
Various coating).
3.2
Surface coating thickness ginning process by processing coated fabric pattern of recess.
3.3
Cortical thickness of the adhesive layer and the adhesive base cloth.
3.4
By coating the fabric is bonded with adhesive coated surface infiltration distance Ruji Bu deepest point.
Principle 4
Under specified conditions, measured with a microscope coated fabric slice thickness of the coating layers.
5 instruments, appliances and materials
5.1 Microscope
Magnification. 40,100,250,400.
Eyepiece Specifications. × 10, graduated scale scale is 100.
Objective standard. × 4, × 10, × 25, × 40.
Stage micrometer. for checking magnification, dividing the value of at least 0.01mm.
5.2 folder knife, chopping boards. Can hinge type slicer pole and wooden cutting boards, see Appendix A.
5.3 double-sided blade.
Related standard:   FZ/T 01010-2012  FZ/T 01004-2008
Related PDF sample:   GB/T 5714-2019  GB/T 4146.2-2017
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2020