| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| CQC-C1108-2014 | English | 1079 |
Add to Cart
|
3 days [Need to translate]
|
China Compulsory Certification Implementation Detailed-Rules - Motor vehicle devices for indirect vision
| |
CQC-C1108-2014
|
PDF similar to CQC-C1108-2014
Basic data | Standard ID | CQC-C1108-2014 (CQC C1108-2014; CQC-C11-08-2014; CQC-C1108-2014) | | Description (Translated English) | China Compulsory Certification Implementation Detailed-Rules - Motor vehicle devices for indirect vision | | Sector / Industry | China Quality Certification Center - CCC Implementation Detailed-Rules | | Classification of Chinese Standard | CQC | | Classification of International Standard | CNCA C11-08-2014 | | Word Count Estimation | 27,211 | | Quoted Standard | GB 15084; GB 17352 | | Regulation (derived from) | CNCA C11-08-2014 | | Issuing agency(ies) | China Quality Certification Center | | Summary | This document specifies the China Compulsory Certification (CCC) implementation Detailed-Rules for Motor vehicle devices for indirect vision. This document defines the Motor vehicle devices for indirect vision's certification unit; certification entrustin | CQC-C1108-2014: China Compulsory Certification Implementation Detailed-Rules - Motor vehicle devices for indirect vision
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
China Compulsory Certification Implementation Detailed-Rules-Motor vehicle devices for indirect vision
Compulsory Product Certification Implementation Details Motor Vehicle Indirect Vision Device CQC-C1108-2014
0 Preface
Implementing Rules for Compulsory Product Certification of Motor Vehicle Indirect Vision Device (hereinafter referred to as.
The detailed rules are based on the "implementation rules for compulsory product certification".
(CNCA-C11-08..2014) (hereinafter referred to as. Implementation Rules)
The supporting documents of the implementation rules are used together with the implementation rules.
The product scope, certification basis, etc. and the implementation rules applicable to these implementing rules
The relevant regulations are consistent and are based on the National Certification and Accreditation Administration
(Known as the National Accreditation Administration)
The announcement of catalogue definition and catalogue adjustment will be adjusted.
CQC, in accordance with the provisions of the certification implementation rules,
Formulate and publish this certification
Regulations. These rules establish the classification management requirements of manufacturing enterprises,
Classification to clarify the implementation requirements for compulsory product certification of indirect vision devices for motor vehicles.
0.1 Definition of terms
0.1.1 Indirect field of view device. used by the driver to observe the proximity of vehicles that cannot be observed by direct field of vision
Installations in transportation areas, including.
Car Mirror. See the rear and side images of the vehicle in a defined field of view through the reflective surface
Various types of optical sight mirrors such as endoscopes, exterior mirrors and surveillance mirrors;
Motorcycle rearview mirror. for motorcycles and mopeds that provide clear rear vision
Rearview mirror assembly
Camera-Monitor. See the car clearly through a system of cameras and monitors
Device for image of adjacent areas. Including cameras, monitors, recording devices, etc.
Righteousness GB 15084.
0.1.2 Use of production equipment testing (referred to as TMP method)
Engineers in designated laboratories carry out tests using testing equipment in the factory laboratory.
The factory shall send testing personnel to assist. Test report issued by the relevant designated laboratory.
0.1.3 Witness detection of production enterprises (referred to as WMT method)
The production company's inspection resources implement TMP inspection or WMT inspection at the production site, hereinafter also referred to as on-site inspection.
In principle, CQC does not separately organize audits of factory laboratories. Certified client's factory
The laboratory's application for review shall be submitted at the same time as the application for production site testing. CQC organization designated experiment
Laboratory technical experts conduct laboratory audits and on-site testing at the same time.
Force audit, and keep the corresponding audit and evaluation records, and then conduct on-site inspection after passing the test.
0.3.3 Maintenance of qualifications
CQC shall conduct periodic inspections of approved factory laboratories (such as once a year,
Determined by frequency). In principle, laboratory supervision must be combined with factory post-certification supervision
get on. Factory laboratories should participate in comparison tests to ensure the accuracy and validity of test results and maintain qualifications.
If there is a demand from the production enterprise, it can be carried out for the on-site testing project proposed by the certification client.
For a single verification, the verification results are only valid for this on-site inspection project. Factory lab can
No more supervision to maintain eligibility. When the same project needs on-site inspection, it should apply for review again.
Scope of application
For indirect vision devices mounted on M, N, and L motor vehicles, including
Car Mirrors, Motorcycle Mirrors and Cameras-Monitor Units.
Changes due to factors such as laws and regulations or related product standards, technology, and industrial policies
The resulting adjustment of the scope of application shall be subject to the announcement issued by the CNCA.
2. Certification standards
GB 15084 Performance and installation requirements for indirect field of vision devices for motor vehicles
GB 17352 Performance and installation requirements for motorcycle and moped rearview mirrors
The above standards should, in principle, implement the latest version issued by the national standardization administrative department
this. When other versions of the standard are required, they shall be applied in accordance with the relevant
The announcement required by the standard is implemented.
3. Authentication mode
3.1 Basic mode of authentication
The basic certification modes for implementing mandatory certification of indirect vision device products are.
Supervision after the initial factory inspection of type test is obtained;
Post-certification supervision in the above basic certification model includes follow-up inspection and supervision after certification
Two methods of sampling and testing, including supervision sampling testing and sampling at the production site
Or inspection and market sampling inspection or inspection.
Combined with the classification management principles of production enterprises, the supervision of different types of enterprises in the post-certification supervision
Consider combinations of relevant certification elements, as appropriate.
3.2 Applicability of the certification model
Class A. After the certification, the supervision can use the follow-up inspection after the certification, the sampling of the production site to check
One or a combination of three methods. inspection or inspection, market sampling inspection or inspection.
Type B, C, and D production enterprises. After the certification, the supervision shall adopt the follow-up inspection after the certification
Supervision sampling testing (sampling at production site and/or market).
The selection of the certification mode of the production company of the maintenance parts of the discontinued models can be based on this
Annex 2 to the Rules.
The certification client may make an application for the applicable certification mode according to its actual situation.
CQC based on the characteristics of the product applying for certification and the principles of certification risk control,
The result of the class management determines the authentication mode applicable to the authentication client.
4. Division of authentication unit
In principle, the same producer (manufacturer) and
A motor vehicle indirect vision device product that does not differ significantly is a certification unit.
(1) the design of the device (if relevant, including the design of the connection with the body), such as.
Structure and materials, the structure and materials of the connector (support), the connection method with the vehicle body, and
Mirror adjustment method, etc.
(2) For the sight glass, the type and shape of the sight glass, and the size and radius of curvature of the reflecting surface;
(3) For a camera-monitor device, a discovery distance and a field of view are found.
The certification client shall propose a certification commission based on the principle of unit division. Can be packaged in the same unit
Contains multiple models. The same model means that the design does not affect the compliance of the standard
The same product produced by the same producer and different production enterprises (should have the same production
Process and same key components/raw material suppliers), or different producers, same production enterprises
The same product produced should be in different application units, but samples from only one unit can be considered
Type test on the product, the products of other manufacturers/producers need to provide information for consistency check
5. Authentication commission
5.1 Certification application submission and acceptance
The certification client submits a certification commission to CQC through the network.
The client of the certificate shall fill in the necessary enterprise information and product information as required. CQC according to relevant requirements
Review the application and send a notice of acceptance or rejection within 2 working days, or
Ask the certification client to re-apply for certification after rectification.
5.2 Application Information
After the application is accepted, the certification client shall submit to the CQC and/or the designated entity as required by the certification scheme.
The laboratory provides relevant application information and technical materials, which usually include.
(1) Application for certification;
(2) The following registration certificates and related documents of certification clients, producers, and production enterprises.
a. Business license, organization code certificate (for initial application and changes);
b. If the three are inconsistent, the relevant agreement or contract signed by the relevant parties must also be submitted
(Such as commissioned processing agreement, authorization, etc.) (if applicable);
c. When the applicant is a seller or importer, it must also submit the seller and producer, import
A copy of the relevant contract between the manufacturer and the producer (for the initial application and changes);
d. Power of attorney of the agent (if applicable);
e. For overseas production enterprises, domestic entity certification that can bear legal responsibility
(When required by relevant laws and regulations).
(3) Each certification unit must provide product descriptions and photos in accordance with the requirements of Annex 1 of the Implementation Rules
And product drawings and other technical information. If there are multiple models/specifications in the same unit, please provide
Description of differences between different models. It should be filled in according to the specific technical file format issued by CQC.
And submit electronic materials.
(4) List of key parts/raw materials
Each certification unit is required to provide a list of key components/raw materials in accordance with the requirements of Annex 1 of these Detailed Rules
For key components/raw materials within the scope of compulsory product certification acquired in China
Materials, such as turn signals, manufacturers should provide compulsory product certification certificates;
Other key parts/raw materials, the manufacturer can provide the corresponding voluntary certification or have
GB/T 27025 (IS0/IEC 17025) accredited laboratory issued a valid test report.
(5) Production consistency control plan prepared in accordance with Annex 2 of the Implementation Rules and Annex 1 to these Rules
(For initial application and changes)
(6) Factory inspection survey form (if applicable);
(7) Documents required by other certification bodies.
5.3 Implementation arrangements
CQC develops a certification scheme after acceptance and informs the client of the certification. Certification Scheme
It often includes the following.
(1) The authentication mode and unit division used;
(2) List of application materials to be submitted;
(3) Type test plan;
(4) Designated laboratory information;
(5) The required certification process and time limit;
(6) Expected certification costs;
|