| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| CQC-C1107-2014 | English | 1159 |
Add to Cart
|
3 days [Need to translate]
|
China Compulsory Certification Implementation Detailed-Rules - Vehicle exterior lighting and light signaling devices
| |
CQC-C1107-2014
|
PDF similar to CQC-C1107-2014
Basic data | Standard ID | CQC-C1107-2014 (CQC C1107-2014; CQC-C11-07-2014; CQC-C1107-2014) | | Description (Translated English) | China Compulsory Certification Implementation Detailed-Rules - Vehicle exterior lighting and light signaling devices | | Sector / Industry | China Quality Certification Center - CCC Implementation Detailed-Rules | | Classification of Chinese Standard | CQC | | Classification of International Standard | CNCA C11-07-2014 | | Word Count Estimation | 29,229 | | Quoted Standard | GB 4599; GB 21259; GB 25991; GB 4660; GB 11554; GB 5920; GB 15235; GB 17509; GB 18408; GB 18409; GB 18099; GB 23255; GB 5948; GB 19152; GB 17510; GB 11564; GB 25990; GB/T 30036; GB/T 30511 | | Regulation (derived from) | CNCA C11-07-2014 | | Issuing agency(ies) | China Quality Certification Center | | Summary | This document specifies the China Compulsory Certification (CCC) implementation Detailed-Rules for Vehicle exterior lighting and light signaling devices. This document defines the Vehicle exterior lighting and light signaling devices's certification unit; | CQC-C1107-2014: China Compulsory Certification Implementation Detailed-Rules - Vehicle exterior lighting and light signaling devices
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
China Compulsory Certification Implementation Detailed-Rules-Vehicle exterior lighting and light signaling devices
0 Preface
Implementation Rules for Compulsory Certification of Motor Vehicle Exterior Lighting and Light Signal Devices (hereinafter referred to as.
Implementation rules) are based on the "Implementation Rules for Compulsory Product Certification"
Number Device "(CNCA-C11-07..2014) (hereinafter referred to as. Implementation Rules),
As a supporting document for the implementation rules, it is used together with the implementation rules.
The product scope, certification basis, etc. and the implementation rules applicable to these implementing rules
The relevant regulations are consistent and are based on the National Certification and Accreditation Administration
(Known as the National Accreditation Administration)
The announcement of catalogue definition and catalogue adjustment will be adjusted.
CQC, in accordance with the provisions of the certification implementation rules,
Develop and publish the certification principles of quality, service certification companies and control of certification risks
Regulations. These rules establish the classification management requirements of manufacturing enterprises,
Classify and clarify the implementation requirements for compulsory product certification of automotive exterior lighting and light signal devices.
0.1 Definition of terms
0.1.1 External lighting and light signalling devices. designed to illuminate the road or to other road users
Device that emits light signals (hereinafter also referred to as lamps). See the definition of various types of lamps
The corresponding standards in GB 4785, GB 18100 and Annex 4 of the Implementation Rules.
0.1.2 Use of production equipment testing (referred to as TMP method)
Engineers in designated laboratories carry out tests using testing equipment in the factory laboratory.
The factory shall send testing personnel to assist. Test report issued by the relevant designated laboratory.
0.1.3 Witness detection of production enterprises (referred to as WMT method)
Engineers in designated laboratories witnessed factory laboratory test conditions and factory laboratories
Use your own equipment to complete all tests or test plans submitted by the factory, and witness some
Testing conditions and testing items. Factory laboratory inspectors are responsible for issuing original records and contacting
Witness the designated laboratory engineer to draft a test report in a prescribed format. Specified by related
The laboratory audits and issues the test report.
Laboratory technical experts conduct laboratory audits and on-site testing at the same time.
Force audit, and keep the corresponding audit and evaluation records, and then conduct on-site inspection after passing the test.
0.3.3 Maintenance of qualifications
CQC shall conduct periodic inspections of approved factory laboratories (such as once a year,
Determined by frequency). In principle, laboratory supervision must be combined with factory post-certification supervision
get on. Factory laboratories should participate in comparison tests to ensure the accuracy and validity of test results and maintain qualifications.
If there is a demand from the production enterprise, it can be carried out for the on-site testing project proposed by the certification client.
For a single verification, the verification results are only valid for this on-site inspection project. Factory lab can
No more supervision to maintain eligibility. When the same project needs on-site inspection, it should apply for review again.
Scope of application
External lighting and optical signaling for M, N, 0 and L motor vehicles
No. device. For example. independent or combined (composite, hybrid) headlights, front fog lights, rear fog
Lights, front lights, rear lights, position lights, brake lights, reversing lights, turn signals, daylight
Driving lights, corner lights, parking lights, side marker lights, rear license plate lighting, adaptive lighting
Systems, retro-reflectors and tail markers, etc .; including. only without light bulbs and/or sockets
Lighting fixtures.
Changes due to factors such as laws and regulations or related product standards, technology, and industrial policies
The resulting adjustment of the scope of application shall be subject to the announcement issued by the CNCA.
2. Certification standards
GB 4599 automotive filament lamp headlight
GB 21259 automotive gas discharge light source headlamp
GB 25991 LED headlight for automobile
GB 4660 Filament Bulbs for Automobiles
GB 11554 Light distribution performance for rear fog lights of motor vehicles and trailers
GB 5920 Light distribution performance of front and rear position lights, position lights and brake lights of automobiles and trailers
GB 15235 Car and Trailer Reversing Light Distribution Performance
GB 17509 Light distribution performance of automobile and trailer turn signal
GB 18408 Light distribution performance of rear license plate lighting for automobiles and trailers
GB 18409 Car Parking Light Distribution Performance
GB 18099 Car and Trailer Side Marker Light Distribution Performance
GB 23255 Car daytime running light distribution
GB 5948 Light distribution performance of motorcycle incandescent light source headlamp
GB 19152 Light Distribution Performance of Moped Headlight
GB 17510 Light distribution performance of motorcycle light signal device
GB 11564 Motor vehicle retro reflector
GB 25990 Vehicle rear sign board
GB/T 30036 Automotive Adaptive Front Lighting System
GB/T 30511 automotive light distribution
The above standards should, in principle, implement the latest version issued by the national standardization administrative department
this. When other versions of the standard are required, they shall be applied in accordance with the relevant
The announcement required by the standard is implemented.
3. Authentication mode
3.1 Basic mode of authentication
The basic certification modes for implementing mandatory certification of lighting products are.
Supervision after the initial factory inspection of type test is obtained;
Post-certification supervision in the above basic certification model includes follow-up inspection and supervision after certification
Two methods of sampling and testing, including supervision sampling testing and sampling at the production site
Or inspection and market sampling inspection or inspection.
Combined with the classification management principles of production enterprises, the supervision of different types of enterprises in the post-certification supervision
Consider combinations of relevant certification elements, as appropriate.
3.2 Applicability of the certification model
Class A. After the certification, the supervision can use the follow-up inspection after the certification, the sampling of the production site to check
One or a combination of three methods. inspection or inspection, market sampling inspection or inspection.
Type B, C, and D production enterprises. After the certification, the supervision shall adopt the follow-up inspection after the certification
Supervision sampling testing (sampling at production site and/or market).
The selection of the certification mode of the production company of the maintenance parts of the discontinued models can be based on this
Annex 2 to the Rules.
The certification client may make an application for the applicable certification mode according to its actual situation.
CQC based on the characteristics of the product applying for certification and the principles of certification risk control,
The result of the class management determines the authentication mode applicable to the authentication client.
4. Division of authentication unit
In principle, the same producer (manufacturer) and the same production enterprise (factory) produce
A lighting unit that does not differ significantly in the following areas is a certification unit.
(1) Applicable standards and functions;
(2) Light source type (filament bulb, light source module, etc.);
(3) the characteristics of the optical system;
(4) Parts that change optical effects through reflection, refraction, absorption and/or deformation during work,
Luminous intensity level and light distribution angle, etc.);
(5) For lamps with non-replaceable light sources, the photoelectric parameters of the light source (nominal voltage, standard
Weighing power, filament shape, etc.);
(6) the type, level and mode of lamps (such as headlamps, front fog lamps, turn signals, brakes
Lights, side marker lights, rear license plate lighting, retro reflectors, tail marker plates, etc.);
(7) Retro-reflective optical unit of retro-reflector;
(8) Tail sign board. characteristics of retro-reflective materials, characteristics of fluorescent materials, influence on recovery
Reflective material or part of a device.
The certification client shall propose a certification commission based on the principle of unit division. Can be packaged in the same unit
Contains multiple models. The same model means that the design does not affect the compliance of the standard
The same product produced by the same producer and different production enterprises (should have the same production
Process and same key components/raw material suppliers), or different producers, same production enterprises
The same product produced should be in different application units, but samples from only one unit can be considered
Type test on the product, the products of other manufacturers/producers need to provide information for consistency check
5. Authentication commission
5.1 Certification application submission and acceptance
The certification client submits a certification commission to CQC through the network.
The client of the certificate shall fill in the necessary enterprise information and product information as required. CQC according to relevant requirements
Review the application and send a notice of acceptance or rejection within 2 working days, or
Ask the certification client to re-apply for certification after rectification.
5.2 Application Information
After the application is accepted, the certification client shall submit to the CQC and/or the designated entity as required by the certification scheme.
The laboratory provides relevant application information and technical materials, which usually include.
(1) Application for certification;
(2) The following registration certificates and related documents of certification clients, producers, and production enterprises.
a. Business license, organization code certificate (for initial application and changes);
b. If the three are inconsistent, the relevant agreement or contract signed by the relevant parties must also be submitted
(Such as commissioned processing agreement, authorization, etc.) (if applicable);
c. When the applicant is a seller or importer, it must also submit the seller and producer, import
A copy of the relevant contract between the manufacturer and the producer (for the initial application and changes);
|