SN/T 2786-2011 English PDFUS$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 2786-2011: Method for analysis of magnesium and magnesium alloys. Optical emission spectrometry Status: Valid
Basic dataStandard ID: SN/T 2786-2011 (SN/T2786-2011)Description (Translated English): Method for analysis of magnesium and magnesium alloys. Optical emission spectrometry Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: H12 Classification of International Standard: 77.120.60 Word Count Estimation: 10,143 Date of Issue: 2011-02-25 Date of Implementation: 2011-07-01 Quoted Standard: GB/T 8170; ASTM B953 Adopted Standard: ASTM B954-2007, NEQ Regulation (derived from): ?AQSIQ-Inspection [2011] 90 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the photoemission spectra of folded square remove magnesium and magnesium alloys. This standard applies to metallic magnesium and magnesium alloy die-cast specimens, castings, plate, specimens deformed extrusion or other form or shape, measuring elements and range in Table 1. SN/T 2786-2011: Method for analysis of magnesium and magnesium alloys. Optical emission spectrometry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Method for analysis of magnesium and magnesium alloys.Optical emission spectrometry People's Republic of China Entry-Exit Inspection and Quarantine Standards Magnesium and magnesium alloy photoemission spectroscopy Issued on. 2011-02-25 2011-07-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordThis standard and ASTMB954-07 "magnesium and magnesium alloy atomic emission spectrometry standard analytical methods" (ASTMB954-07, Standard TestMethodforAnalysisofMagnesiumandMagnesiumAloysbyAtomicEmissionSpectrometry) a Consistency is not equivalent, on the main technical content and ASTMB954-07 basically the same. Structure and not correspond exactly to the preparation of the order. increase Plus warning prompt. Modify the terms of reference documents. Modifications to the instrument state control, reference materials and calibration requirements. Sample Type and refinement size. Modify sample analysis. By deleting some explanatory content. The excitation parameters and exposure time would read informative appendices. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Liaoning Province Exit Inspection and Quarantine, Shimadzu (Hong Kong) Limited. The main drafters of this standard. Dong Xiuwen, Li Yan, An Guoyu, Zhang Bo. This standard is the first release of the entry-exit inspection and quarantine industry standards. Magnesium and magnesium alloy photoemission spectroscopy Warning --- personnel should use this standard regular laboratory work experience. This standard does not point out all possible security asked question. Users have the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.1 ScopeThis standard specifies the photoelectric magnesium and magnesium alloys emission spectroscopy method. This standard applies to magnesium die-cast magnesium alloy metal specimens, castings, sheet, extrusions or other specimens deformed shape or form and, measuring cell Su and range in Table 1. Table 1 Determination of elements and scope Element measurement range (mass fraction) /% Al 0.001 ~ 12.0 Be 0.0001 ~ 0.01 B 0.0001 ~ 0.01 Cd 0.0001 ~ 0.05 Ca 0.0005 ~ 0.05 Ce 0.01 ~ 3.0 Cr 0.0002 ~ 0.005 Cu 0.001 ~ 0.05 Dy 0.01 ~ 1.0 Er 0.01 ~ 1.0 Gd 0.01 ~ 3.0 Fe 0.001 ~ 0.06 La 0.01 ~ 1.5 Pb 0.005 ~ 0.1 Li 0.001 ~ 0.05 Mn 0.001 ~ 2.0 Nd 0.01 ~ 3.0 Ni 0.0005 ~ 0.05 P 0.0002 ~ 0.01 Pr 0.01 ~ 0.5 Sm 0.01 ~ 1.0 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 2786-2011_English be delivered?Answer: Upon your order, we will start to translate SN/T 2786-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 2786-2011_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 2786-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
