US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 7000.6-2008: Safety requirements of luminaires with built-in trans-formers for filaments lamps
Status: Valid
GB 7000.6: Historical versions
| Standard ID | USD | BUY PDF | Lead-Days | Standard Title (Description) | Status |
| GB 7000.6-2008 | 194 |
Add to Cart
|
3 days
|
Safety requirements of luminaires with built-in trans-formers for filaments lamps
| Valid |
| GB 7000.6-1996 | 319 |
Add to Cart
|
3 days
|
Safety requirements of luminaires with built-in transformers for filaments lamps
| Obsolete |
Basic data
Standard ID: GB 7000.6-2008 (GB7000.6-2008)
Description (Translated English): Safety requirements of luminaires with built-in trans-formers for filaments lamps
Sector / Industry: National Standard
Classification of Chinese Standard: K72
Classification of International Standard: 29.140.40
Word Count Estimation: 10,139
Date of Issue: 2008-04-11
Date of Implementation: 2009-01-01
Older Standard (superseded by this standard): GB 7000.6-1996
Quoted Standard: GB/T 5465.2; GB 7000.1; GB 13028
Adopted Standard: IEC 60598-2-6-1997, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 5, 2008 (No. 118 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Chinese standard relates to filament with built-in transformers or converters, power supply voltage and the output voltage not exceeding 1000V class �� and �� type lamps safety requirements. And references in this standard to GB 7000. 1 read in conjunction with the relevant sections. GB 7000 this standard does not apply to Class �� lamps. In order to meet the requirements of this standard using the"safety extra low voltage"transformer or converter is not necessary. But this transformer or converter to meet the special requirements of this standard.
GB 7000.6-2008: Safety requirements of luminaires with built-in trans-formers for filaments lamps
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety requirements of luminaires with built-in trans-formers for filaments lamps
ICS 29.140.40
K72
National Standards of People's Republic of China
GB 7000.6-2008/IEC 60598-2-6.1994
Replacing GB 7000.6-1996
Luminaires - Part 2-6. Particular requirements
Tungsten lamp with a built-in transformer or transducer
(IEC 60598-2-6.1994, IDT)
Published 2008-04-11
2009-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China issued
Table of Contents
Introduction Ⅲ
1 Scope 1
2 1 General test requirements
3 Definitions 1
Category 4 lamp 2
5 marks 2
6 Structure 3
7 creepage distances and clearances 3
8 3 grounding provisions
Terminal 9 3
External 10 and internal wiring 3
Protection against electric shock 11 4
Thermal test and durability test 12 4
13 dust-proof and waterproof 4
14 Insulation resistance and electric strength 4
15 heat, fire and resistance to tracking 4
Examples of Annex A (normative) Structure 5
GB 7000.6-2008/IEC 60598-2-6.1994
Foreword
All technical contents of this section is mandatory.
This section GB 7000 series lighting a part of the national standard, GB 7000 series has 19 parts to this part of publication
Japan, published GB 7000 series of standards are as follows.
--- GB 7000.1-2007 lamps - Part 1. General Requirements and Test
--- GB 7000.2-2008 Luminaires - Part 2-22. Particular requirements for emergency lighting
--- GB 7000.3-1996 safety requirements of portable luminaires for garden use
--- GB 7000.4-1996 Luminaires - Part 2-10. Particular requirements for children luminaries
--- GB Safety requirements of luminaires for road and street lighting
Particular requirements for built-in lamps with tungsten filament transformers or converters. --- GB 7000.6-2008 lamps - Part 2-6
--- GB 7000.7-2005 Safety requirements for floodlights
--- GB 7000.8-1997 swimming pools and similar lighting safety requirements
--- GB 7000.9-2008 lamps Part 2-20. Particular requirements for light strings
--- GB 7000.10-1999 Safety requirements for fixed general purpose luminaires
--- GB 7000.11-1999 portable general purpose lamps safety requirements
--- GB 7000.12-1999 Safety requirements for recessed luminaires
--- GB 7000.13-1999 Safety requirements for handlamps
--- GB 7000.14-2000 ventilated luminaires safety requirements
--- GB 7000.15-2000 stage lighting, television, film and photographic studios (indoor and outdoor) Safety requirements of luminaires
--- GB 7000.16-2000 building hospitals and rehabilitation clinics Safety requirements of luminaires
--- GB 7000.17-2003 safety requirements limit the surface temperature of the lamp
--- GB 7000.18-2003 filament lamps extra low voltage lighting system security requirements
--- GB 7000.19-2005 photo and film (non-professional use) Safety requirements for lighting
This section is part of the GB 67000 series.
This section is equivalent to using IEC 60598-2-6.1994 "lamps - Part 2. Particular requirements Chapter 6. tungsten with built-in transformer
Lamps "and 1996 Revision 1 piece or converter.
This made the following section editorial changes to the text.
--- Since the 2003 publication 2.2 6th edition of IEC 60598-1 has been deleted Category 0 type lamps, so in this part of the revision
When deleting the original in the range of "0 to not more than 250V type lamps" text of article classification description 4 in the lamp
"Class 0", on the last paragraph of Article 6.1 of the relevant provisions 0 class structure also deleted.
1.1 --- original reference documents because the IEC 60742 GB identical with the first one has been equivalent to 13028
IEC GB 19212.1 61558-1 alternatives, so increasing the reference standard GB 19212.1 time of writing.
--- original 1.1 reference documents IEC 1046.1993 IEC 61347-2-2 has been replaced so when the original written
IEC 1046 instead equivalent to the national standard of GB 19510.3 IEC 61347-2-2.
This partial replacement GB 7000.6-1996 "filaments lamps built-in transformers safety requirements", and the standard edition GB 7000.6-
The main technical difference between the 1996 version of the standard include.
--- standard name to "lamps - Part 2-6. Particular requirements with built-in transformers or converters tungsten lamp."
--- insert "or switch" or "or (SELV) converter" After a plurality of articles "transformer", as the terms of paragraph 1 and 1
3 segments; Terms of from 3.2 to 3.7; the end of the injection at the end of clause 5 and 8.1 the second line and the like.
GB 7000.6-2008/IEC 60598-2-6.1994
5.5 --- modification, when the invisible with normal operation of the converter transformer or fuse alternatively, should the transformer or converter
Mark symbol on the fuse unit.
Appendix A of this section is normative.
This section was proposed by China Light Industry Federation.
This part of the jurisdiction of the National Electric lighting Standardization Technical Committee (SAC/TC224) Standardization Technical Committee lamps.
This part was drafted. the era of Shanghai Lighting Appliance Testing Co., Zhejiang Chen Hui Lighting Co., Ltd., the national quality fixtures
The amount of Supervision and Inspection Center, China Illuminating Engineering Society of Professional Committee of lamps.
This part drafter. Li Suping, Shi Xiaohong, Zhao Guosong, Luguang Ming Chen Chao in.
This section replaces the following previously issued as follows.
--- GB 7000.6-1996.
GB 7000.6-2008/IEC 60598-2-6.1994
Luminaires - Part 2-6. Particular requirements
Tungsten lamp with a built-in transformer or transducer
Range 1
GB 7000 specifies this section with tungsten or with a built-in converter transformer, the power supply voltage and the output voltage does not exceed 1000V
Type Ⅰ and safety requirements class Ⅱ lamps. This section should be read in conjunction with the relevant sections of GB 7000.1 references.
GB section 7000 does not apply to the present Ⅲ type lamps.
In order to meet the requirements of this section and use the "Safety Extra Low Voltage" (SELV) or transformer (SELV) converter is not required. but
Such a transformer or converter to meet the specific requirements of this section.
1.1 Normative References
Terms of the following documents constitute provisions of this section by reference in this 7000 GB . For dated references,
All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encouraged to reach an agreement under this section
Whether the parties to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 5465.2 electrical equipment graphical symbols (GB/T 5465.2-1996, idt IEC 417.1994)
GB 7000.1 lamps - Part 1. General requirements and tests (GB 7000.1-2007, IEC 60598-1.2003, IDT)
GB 13028 Isolating transformers and safety isolating transformers requirements
GB 19212.1 Safety of power transformers, power supply units and similar products - Part 1. General requirements and tests (GB 19212.1-
2003, IEC 61558-1.1998, MOD)
GB 19510.3 lamp control apparatus Part 3. Tungsten Particular requirements for AC/DC buck converter electronics
(GB 19510.3-2004, IEC 61347-2-2.2000, IDT)
2 General test requirements
Application of the provisions of Section 0 7000.1 GB respective chapters each test shall be set forth in this section of GB 7000.1
Order.
Definition 3
GB 7000.1 in use with the definition in Chapter 1 and the following definitions.
3.1
Power source connected to the windings.
3.2
Winding connected to the lamp.
3.3
Converter transformer or a specified supply voltage.
NOTE. If the input winding has a plurality of taps, the transformer or the converter may have more than a nominal supply voltage.
GB 7000.6-2008/IEC 60598-2-6.1994
3.4
Supply voltage range of the converter transformer or spend limit and lower limit represented.
NOTE. nominal supply voltage range is set to a single joint terms. Input winding transformer with multiple taps may have more than a nominal power
voltage range.
3.5
At nominal power supply voltage and a nominal frequency condition, given transformer or converter maximum rated output current.
3.6
The nominal supply voltage, nominal power factor of the power supply frequency and the nominal output current is a condition under given transformer or converter
The output voltage.
3.7
The nominal voltage and the nominal output product of the output current.
Category 4 lamps
Lamps shall be divided into classes and class Ⅱ Ⅰ GB 7000.1 in accordance with Chapter 2.
5 Mark
Application GB 7000.1 with a predetermined Chapters 3 and 5.1 to 5.5 or less.
Note. In accordance with GB 7000.1 Chapter 3 can be represented on the ballast markers also may be labeled in this section relates to a transformer or converter
On the device.
5.1 nominal supply voltage or nominal supply voltage range (V) to be marked can see the position of maintenance in the lamp.
Nominal output voltage of 5.2 (V) to be marked on the luminaire can see the position of the light source when the exchange.
5.3 applies, "lamps operate at a power supply voltage and off the power source should be preceded by exchange" warning should be provided with the luminaire
The manufacturer's instructions in a statement. When the lamp voltage of the power supply voltage considerable differences, this warning is necessary. For example, lamp
6V voltage and the power supply voltage 240V autotransformer.
5.4 converter transformer and should be marked with a number or code given by the manufacturer. In addition, proper use and maintenance required, following a predetermined letter
Interest should be marked in the luminaire, or a transformer or converter provided with the fixture or with the manufacturer's instructions.
a) nominal output VA (VA) or the nominal output current (A);
b) If in order to accommodate different rated supply voltage, a transformer or converter installation is then adjusted, or rotation regulating transformer
Voltage converter;
c) The nominal output voltage of each winding and the tap or the nominal output current or the nominal output VA (VA). However, with taps
Long output winding of the transformer and the converter, and if the transformer is a converter output voltage (e.g., a linker converting means)
Frequent changes in specially designed for this tag is not required.
5.5 If Alternatively or fuse to protect the converter transformer, a fuse should be at or near labeled fuse rated fuse holder
value. If the transformer is not visible when the converter or alternatively fuse with normal operation, the transformer should be labeled or blown converter
Symbol.
(See GB/T 5465.2 symbol No.5016).
GB 7000.6-2008/IEC 60598-2-6.1994
6 structure
Articles 6.1 - 6.3 7000.1 in Chapter 4 of the following applications GB .
6.1 Electrical safety output circuit should be at least equivalent to the electrical safety of the power supply circuit. This requirement can be achieved by a method of the following.
a) using the self-winding transformer, the insulating its secondary circuit must meet the requirements of the power supply voltage, the first see GB 7000.1
5,8,10 and 11 chapters;
b) use of dual transformer winding or double winding converter output transformer. Insulation between the windings of these transformers should be the group
This insulation or reinforced insulation.
NOTE. For converter transformers or with Ⅱ type lamps basic insulation between the member and the output circuit of the transformer or the converter requires attachment fixture accessible
Add insulation.
For between the input and output circuits with reinforced insulation, two-winding transformer, the output circuit is connected or accessible to the accessible portion
Not more than one electrode pieces. This requirement applies only to the output circuit voltage exceeds 24V case.
6.2 If the lamp output class Ⅱ electrode is accessible, as a reinforcement between the input and output windings insulation shall comply with the following
Claim.
a) an input and output windings should be spaced apart from the insulating layer, the structure should be done in the two windings can not pass directly or indirectly
Over other metallic connection.
b) in particular, to take the following precautions to prevent.
--- input winding and output winding displacement or rotation of the input or output windings of the winding.
--- displacement of internal wiring or external connecting wires, in case the wiring breakage at the joint or joints adjacent the loose winding or the
Unintended displacement portion of the terminal member.
--- in the event of release or release, wires, screws, washers and the like across the output circuit between the input circuit comprising
Any insulating member between the windings.
Examples of structures that meet these requirements, see Appendix A.
6.3 6.1 6.2 eligibility requirements and shall be tested and visually dielectric strength GB 7000.1 Chapter 10.
7 creepage and clearance distances
The provisions of Chapter 11 7000.1 Application GB .
8 grounding provisions
8.1 ~ 8.3 7000.1 predetermined Chapter 7 in the following applications GB .
8.1 grounding requirements apply to form a connection with the light source and the light source metal housing when the socket is accessible place. These requirements also apply to
Around the metal source accessible, even if the light source away from the transformer or the converter (e.g., a light source mounted on the mobile arm cavity).
A metal housing with a socket accessible should not be connected with the autotransformer, and this does not apply to the isolation SELV
Use the socket transformer together.
Note. the metal ground socket housing, each current carrying conductor must be below 8.3 to ensure compliance with the requirements.
8.2 If the secondary winding and the primary winding of the transformer I or type lamps are separate converter, the secondary line at the ground, should
Only ground on one point.
8.3 when the lamp during normal operation, in addition to the socket housing, a grounded metal member should not be current path.
Terminal 9
The provisions of Chapter 15 and 14 of the application GB 7000.1.
External and internal wiring 10
7000.1 provisions of Chapter 5 of Application GB .
GB 7000.6-2008/IEC 60598-2-6.1994
11 Protection against electric shock
7000.1 provisions of Chapter 8 of the application GB .
Thermal test and durability test 12
Application of GB 7000.1 Chapter 12 provisions and the following requirements.
a) during the durability test, the power supply voltage during the test shall be the nominal voltage of 1.1 ± 0.015 times.
Note converter to be tested at 1.06 times the rated voltage.
Transformer winding temperature should not exceed a predetermined value associated with the winding insulation GB 19212.1 predetermined level;
c) should be present of Chapter 13 of the lamp is greater than the IP20 enclosure class of lamps, in Chapter 9 GB 7000.1 9.2
After the test, the former GB 7000.1 Chapter 9 9.3 GB trials related to test 7000.1 in 12.4,12.5 and 12.6.
13 dust-proof and waterproof
The provisions of Chapter 9 of 7000.1 application GB .
For protective shell lamps of higher than IP20, GB 7000.1 Chapter 9 of the test sequence shall be specified in accordance with Section 12 of this Part.
14 Insulation resistance and electric strength
The provisions of Chapter 10 of the 7000.1 Application GB .
Test voltage between the power supply and output circuits should be identical to the test circuit and the voltage between the power supply housing.
15 heat, fire resistance to tracking and
7000.1 provisions of Chapter 13 Application GB .
GB 7000.6-2008/IEC 60598-2-6.1994
Appendix A
(Normative)
Examples of structures
Examples winding structure conforms 6.2 requirements are.
a) wound on a separate bobbin sufficient insulating capability of the winding material;
b) wound on a single bobbin with sufficient insulation capability of winding the separator, the separator frame and a stamped or molded member, or push
With an intermediate of formula separator into a sheath or covering layer at the junction of the skeleton and a separator;
c) wound on a thin insulating layer coated skeleton or a coaxial winding transformer core, between each input coil and the output coil at least
Using the triple insulated, wherein two layers of material placed in contact, when the test voltage is applied to the outer surfaces of both the insulating layer can withstand add
Strong insulation test voltage.
All windings should be fixed in a reliable manner the last lap, the gap may extend through the entire sheet with an insulating material or a material hard bake
And effectively seal the end of the coil.
Two separate joints are not released simultaneously.
GB 7000.6-2008/IEC 60598-2-6.1994
......
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of GB 7000.6-2008_English be delivered?
Answer: Upon your order, we will start to translate GB 7000.6-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of GB 7000.6-2008_English with my colleagues?
Answer: Yes. The purchased PDF of GB 7000.6-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
Question 5: Should I purchase the latest version GB 7000.6-2008?
Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 7000.6-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
