YS/T 261-2011 PDF in English
YS/T 261-2011 (YS/T261-2011, YST 261-2011, YST261-2011)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| YS/T 261-2011 | English | 120 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Spodumene concentrate
| Valid |
| YS/T 261-1994 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Spodumene concentrate
| Obsolete |
Standards related to (historical): YS/T 261-2011
PDF Preview
YS/T 261-2011: PDF in English (YST 261-2011) YS/T 261-2011
NON-FERROUS METAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 77.150
H 64
Replacing YS/T 261-1994
Spodumene Concentrate
锂辉石精矿
ISSUED ON: DECEMBER 20, 2011
IMPLEMENTED ON: JULY 1, 2012
Issued by: Ministry of Industry and Information Technology of the
People’s Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Requirements ... 4
4 Test Methods ... 5
5 Inspection Rules ... 6
6 Packaging, Marking, Transportation, Storage and Quality Certificate ... 7
7 Contract (or order form) Content ... 8
Spodumene Concentrate
1 Scope
This Standard specifies the requirements, test methods, inspection rules, marking,
packaging, transportation, storage, quality certificate and contract (or order form)
content of spodumene concentrate.
This Standard is applicable to spodumene concentrate, which is obtained through
various mineral processing methods and enrichment. The spodumene concentrate has
been extensively applied to the glass and ceramic industry, and the production of
various chemical products of lithium.
2 Normative References
The following documents are indispensable to the application of this Standard. In terms
of references with a specified date, only versions with a specified date are applicable
to this Standard. In terms of references without a specified date, the latest version
(including all the modifications) is applicable to this Standard.
YS/T 509.1 Methods for Chemical Analysis of Spodumene and Lepidolite
Concentrates - Determination of Lithium Oxide, Sodium Oxide and Potassium
Oxide Contents - Flame Atomic Absorption Spectrometric Method
YS/T 509.5 Methods for Chemical Analysis of Spodumene and Lepidolite
Concentrates - Determination of Ferric Oxide Content - O-phenanthroline
Photometric Method and EDTA Complexometric Method
YS/T 509.6 Methods for Chemical Analysis of Spodumene and Lepidolite
Concentrates - Determination of Phosphorus Pentoxide Content - The
Molybdenum Blue Photometric Method
YS/T 509.8 Methods for Chemical Analysis of Spodumene and Lepidolite
Concentrates - Determination of Calcium Oxide and Magnesium Oxide Content -
Flame Atomic Absorption Spectrometric Method
YS/T 509.10 Methods for Chemical Analysis of Spodumene and Lepidolite
Concentrates - Determination of Manganous Oxide Content - Persulfate Oxidation
Photometric Method
3 Requirements
3.1 Product Classification
5.4.1 Adopt intubation method (plastic tube or stainless-steel tube) to evenly take
samples from each batch of products.
5.4.2 In terms of sacked products, if the weight of each batch of the same grade of
concentrate products is over 10 t, take sample sacks in accordance with 10% of the
number of sacks; if the weight of each batch of the same grade of concentrate products
is below 10 t, take sample sacks in accordance with 20% of the number of sacks.
Unpack all the taken sample sacks; adopt intubation method to take samples sack by
sack. The weight of the taken sample shall be not less than 2,000 g. After mixing it up,
split it into around 500 g. Then, divide it into three parts; split them into around 200 g
for chemical analysis. Samples used for chemical analysis need to be smashed to less
than 0.074 μm.
5.4.3 In terms of the sampling of bulk concentrate products, take samples in
accordance with plum flower-shaped distributed points. Then, in accordance with the
stipulations in 5.4.2, respectively prepare the samples.
5.5 Determination of Inspection Result
5.5.1 When the result of chemical composition analysis is disqualified, it is allowed to
re-take samples (or double the samples) to conduct re-inspection of the disqualified
items. If the samples still fail in one of the items in the re-inspection result, then, this
batch of products shall be determined as disqualified.
5.5.2 When the samples are disqualified in granularity inspection, then, this batch of
products shall be determined as disqualified.
5.5.3 When the samples are disqualified in moisture inspection, then, this batch of
products shall be determined as disqualified.
5.5.4 When the samples are disqualified in appearance quality inspection, then, this
batch of products shall be determined as disqualified.
6 Packaging, Marking, Transportation, Storage and
Quality Certificate
6.1 Packaging, Transportation and Storage
Products may be packed in sacks or bulk. The specific mode of packaging shall be
determined in accordance with the demand-side’s demands. During the transportation
and storage, products shall be protected from the rain.
6.2 Marking
6.2.1 If products are shipped in sacks, on each sack, the following shall be indicated:
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|