YDC 024-2006 PDF in English
YDC 024-2006 (YDC024-2006) PDF English
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| YDC 024-2006 | English | 640 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Test specification of mobile station (including Non UIM mobile station) for 800MHz CDMA 1X digital cellular mobile telecommunication network. Part 2: Protocol conformance test part
| Obsolete |
| YDC 024-2003 | English | RFQ |
ASK
|
3 days
|
General test specification of 800MHz CDMA 1X. Mobile station. Part Volume Ⅱ: Protocol conformance test part
| Obsolete |
Standards related to (historical): YDC 024-2006
PDF Preview
YDC 024-2006: PDF in English YDC 024-2006 (Replaced by.YD/T 1576.21-2013)
YD
Telecommunication Industry Standard
Of the People’s Republic of China
Test Specification of Mobile Station(including Non UIM Mobile
Station) for 800MHz CDMA 1X Digital Cellular Mobile
Telecommunication Network. Part 2. Protocol Conformance Test Part
ISSUED ON. SEPTEMBER 19, 2006
IMPLEMENTED ON. SEPTEMBER 19, 2006
Issued by. Ministry of Industry Information Technology, the People’s
Republic of China
Table of Contents
Preface ... 3
1 Scope ... 5
2 Quoted Standards ... 5
3 Acronyms ... 5
4 Overview ... 9
5 Air Interface Test ... 16
6 POTS TESTS ... 36
7 Handoff Test ... 69
8 Registration Tests ... 95
9 Authentication Tests ... 105
10 Short Message Service (SMS) test ... 113
11 Supplementary Service Tests ... 124
12 Data service tests ... 138
13 Over-the-Air Service Tests ... 202
14 System Selection for Preferred Roaming ... 208
15 Message Driven Indicators ... 214
16 Service Redirection Test ... 214
Appendix A (Normative Appendix) Logging Counters ... 220
Appendix B (Normative Appendix) Information Record ... 230
Preface
This Standard is one of the series of specifications for 800MHz CDMA 1X digital cellular
mobile communication network MS. The structure and names of the serial specifications are as
follows.
1. Technical Specification of Mobile Station (MS) for CDMA 1X Digital Cellular Mobile
Telecommunication Network
2. Test Specification of Mobile Station for 800MHz CDMA 1X Digital Cellular Mobile
Telecommunication Network. Part 1--Minimum Standard, Function and Performance
3. Test Specification of Mobile Station (including Non UIM Mobile Station) for 800MHz
CDMA 1X Digital Cellular Mobile Telecommunication Network. Part 2. Protocol Conformance
Test Part
4. Test Specification of Mobile Station Part Volume 3 Network Compatibility Test for
800MHz CDMA 1X Digital Cellular Mobile Telecommunication Network
Each chapter of this specification references 3GPP2 C.S0031-0 v2.0 Signaling Conformance
Tests for cdma2000 Spread Spectrum Systems with partial modification.
The document replaces YDC 024-2003 Test Specification of Mobile Station for 800MHz
CDMA 1X Digital Cellular Mobile Telecommunication Network. Part 2. Protocol Conformance
Test Part
Major changes in this specification compared to YDC 024-2003 are as follows.
Section 1. update the Applied Scope
Section 3. update the Acronyms;
Section 4. add statement for terminals not support UIM card in the Overview part.
Section 5. add the content for non-UIM Card terminals.
Section 6. add the content for non-UIM Card terminals.
Section 8. add the content for non-UIM Card terminals.
Section 9. add the content for non-UIM Card terminals.
Appendix A and B of this Standard are the normative appendixes.
The specification is printed and distributed as a reference for science and research, design,
production, usage and management activities in order to comply with the construction and
operation requirements of 800MHz CDMA 1X commercial trail network. Any suggestions and
comments during the using, please report to this Standard development unit or the
telecommunication standard technology review department.
The specification is proposed and managed by China Communications Standards Association
(CCSA).
This Standard is drafted by the Telecommunications Research Institute of the Ministry of
Information Industry (MII).
This Standard is written by. Wei Ran, resolute, Yu Li, Ge Zhou, Wu Di, Zhu Jun, ZHOU
Jian Yong.
Test Specification of Mobile Station(including Non UIM Mobile Station)
for 800MHz CDMA 1X Digital Cellular Mobile Telecommunication
Network. Part 2. Protocol Conformance Test Part
1 Scope
This Standard is one of the series of specifications for 800MHz CDMA 1X digital cellular
mobile communication network MS.
The document is applicable for 800MHz CDMA 1X MS that supports UIM card (with device
and card separated) and does not support UIM card (integrated device).
2 Quoted Standards
The following standards contribute to the stipulation of this specification after being quoted. All
the revision versions (excluding correction version) of the quoted standards specified with date are not
applicable for this document. However, parties that have come to agreements based on this document
are encouraged to explore the possibility to use the latest versions of the following standards. The
latest version of the quoted documents without date specified is applicable for this specification.
YDC 015 Technical Specification of Mobile Station (MS) for 800MHz CDMA 1X Digital
Cellular Mobile Telecommunication Network
YDC 018 Technical Specification of Physical Layer over Air Interface for 800MHz CDMA
1X Digital Cellular Mobile Telecommunication Network Interface
YDC 019 Technical Specification of MAC Layer over Air Interface for 800MHz CDMA 1X
Digital Cellular Mobile Telecommunication Network Interface
YDC 020 Technical Specification of LAC Layer over Air Interface for 800MHz CDMA 1X
Digital Cellular Mobile Telecommunication Network Interface
YDC 021 Technical Specification of L3 Signaling over Air Interface for 800MHz CDMA
1X Digital Cellular Mobile Telecommunication Network Interface
3GPP2 C.S0011-B Recommended Minimum Performance Standards for cdma2000
Spread Spectrum Mobile Stations Release B, Version1.0
3GPP2 C.S0031-0 Signaling Conformance Tests for cdma2000 Spread Spectrum Systems
v2.0
3 Acronyms
The following acronyms apply to this specification.
AC Authentication Center 鉴权中心
AWGN Additive White Gaussian Noise 加性高斯白噪声
BPS Bits per Second 比特/秒
BS Base Station 基站
5.1.3 Technical Requirement
The mobile station shall correctly detect the base station Pilot PN offset and acquire
the new base station. All calls shall be established successfully.
5.2 Hashing CDMA Channels, Paging Channels, and Paging Slot
5.2.1 Definition
This test verifies that the mobile station hashes to the correct CDMA Channel, CDMA Paging
Channel, and CDMA Paging Slot. The effect of IMSI on hashed CDMA channel, paging channel, and
slot is also verified.
5.2.2 Test Method
5.2.2.1 CDMA Channel Number Hashing
a) Connect the base station and the mobile station as shown in Figure 1, and configure the base
station for multiple CDMA channel assignment capability.
b) Send a Registration Request Order from the base station and verify the mobile station
responds with a Registration Message. Note that some equivalent method may be employed
to verify that the mobile station has hashed to the correct CDMA channel.
c) Change the IMSI (phone number) in the mobile station so that the hashing operation selects a
different CDMA channel number assignment, and repeat steps a and b.
5.2.2.2 Paging Channel Number Hashing
a) Connect the base station and the mobile station as shown in Figure 1, and configure the base
station for multiple paging channel assignment capability.
b) Send a Registration Request Order from the base station and verify the mobile station
responds with a Registration Message. Note that some equivalent method may be employed
to verify that the mobile station has hashed to the correct paging channel.
c) Change the IMSI (phone number) in the mobile station so that the hashing operation selects a
different paging channel number assignment, and repeat steps a and b.
5.2.2.3 Paging Slot Number Hashing
a) Connect the base station and mobile station as shown in Figure 1, configure the base station
system with slotted mode capability, and verify the mobile station goes into slotted mode.
b) Send a Registration Request Order from the base station and verify the mobile station
responds with a Registration Message. Note that some equivalent method may be employed...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|