SJ/Z 11388-2009 PDF in English
SJ/Z 11388-2009 (SJ/Z11388-2009, SJZ 11388-2009, SJZ11388-2009)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
SJ/Z 11388-2009 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
General guidelines of environment-friendly use period of electronic information products
| Valid |
Standards related to (historical): SJ/Z 11388-2009
PDF Preview
SJ/Z 11388-2009: PDF in English (SJZ 11388-2009) SJ/Z 11388-2009
SJ
ICS 31.020
L 10
Record number.
Electronics Industry Standard
of the People’s Republic of China
General guidelines of environment-friendly use
period of electronic information products
ISSUED ON. NOVEMBER 17, 2009
IMPLEMENTED ON. JANUARY 1, 2010
Issued by. Ministry of Industry and Information Technology
Table of Contents
Foreword ... 3
Introduction ... 4
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 General rules ... 6
5 Determination methods of environment-friendly use period ... 6
6 Use conditions ... 9
7 Test techniques ... 9
Annex A ... 10
Annex B ... 13
References ... 15
Foreword
This technical guiding document is for reference only. Recommendations and
opinions on this technical guiding document shall be reported to the Department of
Science and Technology of the Ministry of Industry and Information Technology of
People's Republic of China.
Annex A of this technical guiding document is informative. Annex B is normative.
This technical guiding document shall be under the jurisdiction of China Electronics
Standardization Institute.
Drafting organization of this technical guiding document. China Electronics
Standardization Institute.
Participating drafting organizations of this technical guiding document. They are listed
in Annex A.
Main drafters of this technical guiding document. Han Shuoxiang, and Yang Meng.
Introduction
Due to the needs of product functions and the limitations of technical level, currently
there are hazardous substances or elements such as lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers
contained in the material composition of some of electronic information products. This
technical guiding document is made to help the industry to determine the
environment-friendly use period of electronic information products that contain
aforementioned toxic and hazardous substances or elements, and to further improve
the pollution control identification of electronic information products, according to the
relevant requirements of "Pollution Control and Management Methods of Electronic
Information Products" (Order No.39 of former Ministry of Information Industry).
Environment-friendly use period of electronic information products is determined by
the manufacturer or importer of electronic information products. If the
environment-friendly use period determined and identified on the corresponding
products exceeds the actual environment-friendly use period of the products, the
manufacturer or importer shall undertake the corresponding legal responsibilities.
General guidelines of environment-friendly
use period of electronic information products
1 Scope
This technical guiding document provides the general guidelines of determining the
environment-friendly use period of electronic information products that contain toxic
and hazardous substances or elements.
The content of this technical guiding document applies to the electronic information
products within the adjustment range of "Pollution Control and Management Methods
of Electronic Information Products", and in which the content of toxic and hazardous
substances or elements exceeds the limit requirements specified in SJ/T 11363-2006.
2 Normative references
The provisions in following documents become the provisions of this guiding
document through the reference in this guiding document. For dated references, the
subsequent amendments (excluding corrections) or revisions do not apply to this
Standard, however, parties who reach an agreement based on this guiding document
are encouraged to study if the latest versions of these documents are applicable. For
undated references, the latest edition of the referenced document applies.
SJ/T 11364 Marking for control of pollution caused by electronic information
products
3 Terms and definitions
The terms and definitions defied in SJ/T 11364 AND the following terms and
definitions apply to this technical guiding document.
3.1
technical environment-friendly use period
The environment-friendly use period determined by practice OR scientific methods
and testing techniques.
3.2
notional environment-friendly use period
products.
5.1.2 Practice method
Electronic information products under normal use conditions, if the toxic and
hazardous substances or elements in products occur the cases of leaking or mutation
for 5 set · times or more, the rounded shortest age limit of the occurrence of cases is
determined as the technical environment-friendly use period of the products.
5.1.3 Test method
When electronic information products occur no the cases of leaking or mutation of
toxic or hazardous substances or elements under normal use conditions, the technical
environment-friendly use period obtained according to the experimental techniques of
Chapter 7 is determined as the technical environment-friendly use period of the
products.
5.2 Notional environment-friendly use period method
5.2.1 General rules
When manufacturer or importer of electronic information products can not determine
the technical environment-friendly use period of electronic information products under
existing practices and technical conditions, it should use notional environment-friendly
use period as the environment-friendly use period of the products.
5.2.2 Safe-use period method
If the products have safe-use period, it should use the safe-use period as the
environment-friendly use period of the products.
5.2.3 Techno-life method
If the manufacturer has determined the techno-life of the products at design stage,
and has taken the environmental factors into the account in design process, it should
calculate the environment-friendly use period of the products according to the
following formula.
Environment-friendly use period = Techno-life + Difference
Note. The difference should include the market life of the products such as transportation and storage
before being sold, and the overhaul life of recoverable products such as repairing and parts
replacement after damaged.
5.2.4 Analogy method
The new electronic information products, of which the technical-environment use
period and safe-use period of the products have not been determined, should use the
environment-friendly use period of the products with same or similar production
technology and raw materials as their own environment-friendly use period.
5.2.5 Check-table method
For some electronic information products, their environment-friendly use period can
be determined according to Annex B.
6 Use conditions
When determining use conditions of the product’s environment-friendly use period,
the following factors shall be taken into account. ambient temperature, pressure,
humidity range, ambient air quality, product setting state, power-on time, use
frequency of the products, matched use conditions, product storage conditions, etc.
7 Test techniques
It should use the internationally accepted test techniques to determine the technical
environment-friendly use period of the products.
References
[1] SJ/T 11363-2006 Requirements for concentration limits for certain hazardous
substances in electronic information products
[2] "Pollution Control and Management Methods of Electronic Information Products"
Ministry of Information Industry February 28, 2006 Order No.39
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|