Path: Home > MISC > Page261 > MHT6084-2012 || Home > Standard_List > MISC > Page261 > MHT6084-2012
MHT6084-2012 English PDF
Price & DeliveryUS$250.00 · In stock · Download in 9 secondsMHT6084-2012: Specification for aero and aero-derived gas turbine engine lubricants Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| MH/T 6084-2012 | English | 250 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Specification for aero and aero-derived gas turbine engine lubricants
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: MHT6084-2012
Similar standards MH/T 6092 | MHT6084-2012: Specification for aero and aero-derived gas turbine engine lubricants
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/MHT6084-2012
MH
CIVIL AVIATION INDUSTRY STANDARD
ICS 75.100
E 34
Specification for aero and aero-derived gas turbine engine
lubricants
Issued on: JUNE 29, 2012
Implemented on: NOVEMBER 01, 2012
Issued by. Civil Aviation Administration of China
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 5
4 Composition... 6
5 Technical requirements... 6
6 Quality inspection... 9
Appendix A (Informative) Report items... 11
Appendix B (Normative) Corrosion and oxidation stability... 13
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the Aircraft Airworthiness Certification Department of
the Civil Aviation Administration of China (CAAC).
This standard was approved for establishment by the Aircraft Airworthiness
Certification Department of the CAAC.
This standard shall be under the jurisdiction of the China Academy of Civil Aviation
Science and Technology.
Drafting organizations of this standard. Second Research Institute of the Civil Aviation
Administration of China, Chongqing Branch of Sinopec Lubricant Company.
Main drafters of this standard. Xia Zuxi, Liu Hua, Yang Zhiyuan, Su Zhenliang, Ma
Dechao, Zong Ming, Mei Li.
Specification for aero and aero-derived gas turbine engine
lubricants
1 Scope
This standard specifies the composition, technical requirements, and quality inspection
requirements for aero and aero-derived gas turbine engine lubricants (5 centistokes
grade) (hereinafter referred to as turbine engine lubricant).
This standard applies to the production of aero and aero-derived gas turbine engine
lubricants.
2 Normative references
The following documents are essential to the application of this document. For the dated
documents, only the versions with the dates indicated are applicable to this document;
for the undated documents, only the latest version (including all the amendments) is
applicable to this standard.
ASTM D 92 Standard test method for flash and fire points by Cleveland open cup
tester
ASTM D 97 Standard test method for pour point of petroleum products
ASTM D 445 Standard test method for kinematic viscosity of transparent and
opaque liquids (and calculation of dynamic viscosity)
ASTM D 892 Standard test method for foaming characteristics of lubricating oils
ASTM D 972 Standard test method for evaporation loss of lubricating greases and
oils
ASTM D 2532 Standard test method for viscosity and viscosity change after
standing at low temperature of aircraft turbine lubricants
ASTM D 2603 Standard test method for sonic shear stability of polymer-containing
oils
Def Stan 05-50 Part 61.Method 9.Protection against oxidation stability
Def Stan 05-50 Part 61.Method 22.Method for evaluating the compatibility of gas
turbine engine lubricants with elastomers
Def Stan 05-50 Part 61.Method 24.Evaluation of the compatibility of mixtures of
base oils, additives, etc. in gas turbine engine lubricants
FED-STD-791 Method 3010 Solid particle contamination in aircraft turbine engine
lubricants (Gravimetric procedure)
FED-STD-791 Method 3410 High-temperature deposition and degradation
properties of aircraft turbine engine fuel
FED-STD-791 Method 3411 Thermal stability and corrosion resistance of aircraft
turbine engine lubricants
FED-STD-791 Method 3604 Swelling properties of synthetic rubber using aircraft
turbine engine lubricants
FED-STD-791 Method 5308 Corrosion resistance and oxidation stability of light
oils (Metal cube)
FED-STD-791 Method 6508 Load-carrying capacity of lubricants (Ryder gearbox)
SAE AIR 4978 Temporary methods for assessing the load carrying capacity of
aircraft propulsion system lubricating oils
SAE ARP 5088 Test method for the determination of total acidity in polyol ester and
diester gas turbine lubricants by automatic potentiometric titration
SAE ARP 5996 Evaluation of coking propensity of aviation lubricants using the
single phase flow technique
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Standard performance capability class
SPC
A type of lubricant that meets general usage requirements.
3.2
High performance capability class
HPC
A type of lubricant that meets engine operating conditions and/or service life
requirements, which is suitable for higher temperatures.
3.3
Batch
A group of base oils, additives, or finished lubricants that have undergone final
analysis and testing.
4 Composition
Turbine engine lubricants shall use polyol ester compounds as base oil and shall not
contain barium or titanium-based organic compounds. If tricresyl phosphate (TCP)
additives are used, the mass fraction of ortho-isomers shall not exceed 0.2%.
All chemical components of turbine engine lubricants shall comply with the laws,
regulations, environmental and toxicological requirements of the country of production
and sale; it shall have a Material Safety Data Sheet (MSDS) or other relevant
documentation to cover these requirements.
5 Technical requirements
The physical, chemical, stability, deposition, tribological properties of the turbine
engine lubricant shall meet the requirements of Tables 1 ~ 5, respectively. The items
listed in Appendix A can be included in the report.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of MHT6084-2012 be delivered?Answer: The full copy PDF of English version of MHT6084-2012 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of MHT6084-2012_English with my colleagues?Answer: Yes. The purchased PDF of MHT6084-2012_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- MHT6084-2012 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of MHT6084-2012?A step-by-step guide to download PDF of MHT6084-2012_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as USD, Euro, KRW, JPY, AUD, CAD, RMB, IDR, INR, THB, HKD etc.).
Step 2: Search keyword "MHT6084-2012".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 | Steps 4~6 | Step 7 | Step 8 | Step 9
|