Powered by Google www.ChineseStandard.net Database: 189760 (20 Jul 2024)

JT/T 325-2018 PDF in English


JT/T 325-2018 (JT/T325-2018, JTT 325-2018, JTT325-2018)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
JT/T 325-2018English145 Add to Cart 0-9 seconds. Auto-delivery. Type dividing and class rating for commercial motor-vehicles of passenger transport Valid

PDF Preview

Standards related to: JT/T 325-2018

JT/T 325-2018: PDF in English (JTT 325-2018)

JT/T 325-2018
JT
TRANSPORTATION INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 03.220.20
P 16
Record no..
Replacing JT/T 325-2013
Type dividing and class rating for commercial
motor-vehicles of passenger transport
ISSUED ON. MAY 22, 2018
IMPLEMENTED ON. AUGUST 1, 2018
Issued by. Ministry of Transport of the People's Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 7
2 Normative references ... 7
3 Terms and definitions ... 8
4 Type dividing ... 9
5 Class rating ... 9
6 Class rating contents ... 10
7 Class rating rules ... 10
8 Class rating requirements ... 11
Bibliography ... 19
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces JT/T 325-2013, Type dividing and class rating for commercial
motor-vehicles of passenger transport. Compared with JT/T 325-2013, in addition to
editorial modifications, the major technical changes are as follows.
-- it changes the scope (see Clause 1; Clause 1 of 2003 edition);
-- it changes the definition of term “commercial motor-vehicles of passenger
transport” (see 3.1; 3.1 of 2013 edition);
-- it adds the terms and definitions of “bus” and “passenger car” (see 3.1.1 and
3.1.2);
-- it changes the scope of small cars (see Table 1; Table 1 of 2013 edition);
-- it changes the class rating of passenger cars (see Table 2; Table 2 of 2013 edition);
-- it changes the content of passenger car rating (see 6.2; 6.2 of 2013 edition);
-- it adds the provision on passenger cars (see 7.3.4);
-- it deletes the provision on the quality guarantee period of commercial motor-
vehicles of passenger transport (see 8.1.1 of 2013 edition);
-- it deletes the provision on engine emissions (see 8.1.2 of 2013 edition);
-- it adds the provision on bus safety performance (see 8.1.2);
-- it adds the provision on bus driver zone (see 8.1.4);
-- it adds the provision on bus safety signs (see 8.1.5);
-- it adds the provision on number of bus marked seats (see 8.1.6);
-- it adds the provision on bus air quality (see 8.1.7);
-- it adds the provision on air pressure of bus braking air cylinder (see 8.1.12);
-- it adds the provision on bus emergency hammers (see 8.1.13);
-- it adds the provision on emergency hammers equipped near bus emergency
windows and automatic window breaking functional devices (see 8.1.14);
-- it adds the provision on bus escape hatches (see 8.1.15);
Type dividing and class rating for commercial
motor-vehicles of passenger transport
1 Scope
This Standard specifies the type and class dividing for commercial motor-vehicles of
passenger transport as well the contents, rules and requirements for class rating.
This Standard applies to the class rating of buses of classes B and III of categories B
and III and passenger cars for commercial road passenger transport.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this document.
GB 7258, Safety specifications for power-driven vehicles operating on roads
GB 13094, Safety requirements for bus construction
GB/T 13594, Antilock braking performance and test procedure for motor vehicles
and their trailers
GB/T 16887, Safety requirements for sleeper bus construction
GB/T 17729, Hygienic standard for the air quality inside long distance coach
GB 18565, Composite performance requirement and detecting methods for road
transport vehicles
GB 19239, Mounting requirements of special equipment for gas vehicle
GB/T 20734, Mounting requirements for liquefied natural gas vehicle special
equipment
GB/T 23334, Open-type roof escape hatch on bus
GB 30678, Safety signs and information symbols for the use of bus
GB 34655, Specifications for extinguishing equipment arrangement in bus
JT/T 198, Dividing and rating requirements for technical classification of road
transport vehicles
JT/T 711, Limits and measurement methods of fuel consumption for commercial
vehicle for passenger transportation
JT/T 782, Technical requirements of tyre failure emergency safety device for bus
JT/T 1030, Bus electromagnetic glass breaker
JT/T 1094, Safety specifications for commercial bus
JT/T 1095, Flame resistance of commercial bus interior materials
QC/T 476, Rain proof performance limit and test method for bus
QC/T 633, The seats of passenger vehicles
QC/T 768, Coach flush toilet
QC/T 997, Structural requirements of integral body for buses
QC/T 1048, Bus emergency hammer
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
commercial motor-vehicles of passenger transport
motor-vehicles which are used for commercial road passenger transport, including
buses and passenger cars
3.1.1
bus
buses of classes B and III of categories M2 and M3 which are used for commercial road
passenger transport
3.1.2
passenger car
motor-vehicles which are used for commercial road passenger transport, mainly used
6 Class rating contents
6.1 The main contents of bus rating include. bus structure, chassis, configuration,
active safety, dynamic performance, inside noise, air conditioning and control, etc.
6.2 The main contents of passenger car rating include. wheel base, configuration,
dynamic performance, air conditioning and control, fire extinguisher, satellite
positioning system, etc.
7 Class rating rules
7.1 Necessary conditions
All rating indexes specified in Clause 8 are necessary conditions.
7.2 Class rating for brand new commercial motor-vehicles of passenger
transport
Brand new commercial motor-vehicles of passenger transport refer to new products
developed by manufacturing enterprises or commercial motor-vehicles of passenger
transport which are imported from abroad; class rating is carried out as specified in
Clause 8, in accordance with the technical documents (import inspection documents)
supplied by the manufacturer and real vehicle testing results.
7.3 Class rating for in-use commercial motor-vehicles of passenger transport
7.3.1 Buses which are inspected and tested complying with relevant provisions in GB
18565, have the corresponding class qualifications rated.
7.3.2 Buses which are inspected and tested complying with relevant provisions on
class I vehicles in JT/T 198, have the corresponding high class bus qualifications rated.
7.3.3 In accordance with the requirements in 7.3.1 and 7.3.2, the existing technical
classes of buses and the real vehicle testing results of facilities are verified as specified
in Clause 8 and corresponding classes are rated.
7.3.4 Passenger cars shall be as required in GB 7258.
7.3.5 For in-use buses whose class have been rated, their class shall be re-rated in a
transfer.
the driver.
8.1.14 Near bus emergency windows whose length is less than or equal to 7 m, in
addition to emergency hammers, devices with an automatic window breaking function
shall also be equipped; their window breaking function shall be as specified in JT/T
1030.
8.1.15 Buses (not including hydrogen fuel battery buses) with a length greater than 9
m shall be equipped with at least 2 escape hatches; buses with a length greater than
7 m but less than or equal to 9 m, shall be equipped with at least one escape hatch.
Open-type escape hatches shall be as required by GB/T 23334.
8.1.16 The installation of special equipment of liquefied petroleum gas and
compressed natural gas buses shall be as specified in GB 19239; the installation of
special equipment of liquefied natural gas vehicles shall be as specified in GB/T 20734.
8.1.17 Flame resistance of interior materials for buses shall be as specified in JT/T
1095.
8.1.18 If an eddy current retarder is installed, its installation location shall be equipped
with a temperature alarm system or automatic fire extinguisher.
8.1.19 Buses shall be provided with at least two parking wedges (e.g. triangular wood
trigs).
8.1.20 Measurement of distance between seats shall be as specified in GB 13094.
8.1.21 The performance of tyre failure emergency safety devices shall be as specified
in JT/T 782 and capable of displaying relevant information to the driver through the
display on the dashboard.
8.1.22 Buses of large type high classes II and III and extra-large type high classes II
and III shall be equipped with toilets, which shall be as specified in QC/T 768; waste
water from hand washing sinks and flushing toilets shall be stored in the drain tank.
8.1.23 Passenger door emergency controllers shall be as specified in GB 7258.
8.1.24 Emergency exits shall be as specified in GB 13094.
8.1.25 Inside buses shall be installed audiovisual players and microphones;
microphones shall be connected using the audio method.
8.1.26 Bus seat measurement shall be as specified in GB 13094; dimensions of seats
shall be as specified in QC/T 633.
8.1.27 Equipping of fire extinguishers on buses shall be as specified in GB 34655.
......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.