GB/T 42698-2023 PDF English
US$185.00 · In stock · Download in 9 secondsGB/T 42698-2023: Textiles - Testing and evaluation for anti-seeing-through property Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 42698-2023 | English | 185 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Textiles - Testing and evaluation for anti-seeing-through property
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 42698-2023
GB/T 42698-2023: Textiles - Testing and evaluation for anti-seeing-through property---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT42698-2023
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 59.080.30
CCS W 04
Textiles - Testing and evaluation for anti-seeing-through
property
ISSUED ON: MAY 23, 2023
IMPLEMENTED ON: DECEMBER 1, 2023
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Principles ... 5
5 Instruments and materials ... 5
6 Standard atmosphere for humidity control and testing ... 6
7 Sample preparation ... 6
8 Test steps ... 6
9 Calculation and presentation of results ... 7
10 Evaluation ... 8
11 Test report ... 8
References ... 9
Textiles - Testing and evaluation for anti-seeing-through
property
1 Scope
This document describes methods for testing and evaluating the anti-seeing-through
property of textiles.
This document is applicable to all kinds of fabrics and their products.
2 Normative references
The following documents contain the provisions which, through normative reference in
this document, constitute the essential provisions of this document. For the dated
referenced documents, only the versions with the indicated dates are applicable to this
document; for the undated referenced documents, only the latest version (including all
the amendments) is applicable to this document.
GB/T 251 Textiles - Tests for colour fastness - Grey scale for assessing staining
GB/T 3978 Standard illuminants and geometric conditions
GB/T 6529 Textiles - Standard atmospheres for conditioning and testing
GB/T 9086 The white standard plate for colorimetry and photometry
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 anti-seeing-through property
The property of a fabric that makes the fabric covering part cannot or is not easy to be
observed clearly by the outside due to the vision being blocked, when visible light is
irradiated.
3.2 lightness
The characteristic of an object’s surface that is relative to brightness and darkness.
Under the same lighting conditions, the scale that is given to the visual perception
characteristics of the surface of the object and based on the whiteboard. One of the three
attributes of color.
[Source: GB/T 5698-2001, 5.8]
3.3 anti-seeing-through index
It is to characterize the degree of anti-seeing-through property, the ratio of the lightness
values measured when the sample is backed with a blackboard and a whiteboard.
NOTE: The larger the ratio, the better the anti-seeing-through property of the sample.
4 Principles
4.1 Method A (instrumental method)
Under the specified test conditions, a colorimeter is used to measure the lightness values
when the sample is backed with a blackboard and a whiteboard, and then the anti-
seeing-through index is calculated to represent the anti-seeing-through property.
4.2 Method B (visual inspection method)
Under the specified test conditions, the grey scale for staining evaluation is used to rate
the color difference between the blackboard part covered by the sample and the
whiteboard part covered by the sample, and the grades are used to characterize the anti-
seeing-through property.
5 Instruments and materials
5.1 Colorimeter
Illumination conditions with standard illuminant D65, CIE 10° observer, and
measurement geometric conditions shall comply with the provisions of GB/T 3978;
specular component excluded, the wavelength range is at least 400 nm~700 nm, and
the wavelength interval is 5 nm; other wavelength intervals shall be indicated in the
report.
The recommended diameter range of the test hole is 1 cm~3 cm.
5.2 Whiteboard
The whiteboard used for the colorimeter calibration and the test shall comply with the
provisions of GB/T 9086. There is a uniform white layer on the surface. Under the
conditions of D65 standard light source, CIE 10° observer, and specular component
excluded, the measured lightness value L is above 90, and the side length of a square is
not less than 45 mm or the diameter of a circle is not less than 25 mm.
fluorescence first.
8.1.2 Attach the back of the sample flatly to the whiteboard (5.2), let the front of the
sample face the test hole of the colorimeter, keep the warp or vertical direction upward,
and measure the lightness value Lw.
8.1.3 Attach the back of the sample flatly to the blackboard (5.3), let the front of the
sample face the test hole of the colorimeter, keep the warp or vertical direction upward,
and measure the lightness value Lb.
8.1.4 Test the rest of the samples according to the steps 8.1.2 and 8.1.3.
8.2 Method B (visual inspection method)
8.2.1 In the standard light source box (5.4), place the whiteboard (5.2) and the
blackboard (5.3) side by side on the same plane, forming an angle of about 45° with the
incident light.
8.2.2 Cover the sample on the blackboard and whiteboard, and the back of the sample
shall be flatly attached to the blackboard and whiteboard, with the warp or vertical
direction upward.
8.2.3 The observation direction is roughly perpendicular to the surface of the sample,
and the observation distance is about 30 cm. Use the grey scale for assessing staining
(5.5) to evaluate the color difference between the part of the blackboard covered by the
sample and the part of the whiteboard covered by the sample.
8.2.4 Test the rest of the samples according to the steps 8.2.2 and 8.2.3.
9 Calculation and presentation of results
9.1 Method A (instrumental method)
9.1.1 The anti-seeing-through index of the sample is calculated according to formula
(1).
where:
S -- the anti-seeing-through index of the sample;
Lb -- the lightness value of the sample that is backed with a blackboard;
Lw -- the lightness value of the sample that is backed with a whiteboard.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 42698-2023 be delivered?Answer: The full copy PDF of English version of GB/T 42698-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 42698-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42698-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 42698-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 42698-2023?A step-by-step guide to download PDF of GB/T 42698-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 42698-2023".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|