GB/T 34590.12-2022 PDF English
US$620.00 · In stock · Download in 9 secondsGB/T 34590.12-2022: Road vehicles - Functional safety - Part 12: Adaptation for motorcycles Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
GB/T 34590.12-2022 | English | 620 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Road vehicles - Functional safety - Part 12: Adaptation for motorcycles
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 34590.12-2022
GB/T 34590.12-2022: Road vehicles - Functional safety - Part 12: Adaptation for motorcycles---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT34590.12-2022
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.040
CCS T 35
Road Vehicles - Functional Safety - Part 12.Adaptation for
Motorcycles
(ISO 26262-12.2018, Road Vehicles - Functional Safety - Part 12.Adaptation
of ISO 26262 for Motorcycles, MOD)
Issued on. DECEMBER 30, 2022
Implemented on. JULY 1, 2023
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 4
Introduction... 6
1 Scope... 10
2 Normative references... 11
3 Terms and Definitions... 12
4 Requirements for Compliance... 12
4.1 Purpose... 12
4.2 General Requirements... 12
4.3 Interpretations of Tables... 13
4.4 ASIL-dependent Requirements and Recommendations... 14
4.5 Adaptation for Motorcycles... 14
4.6 Adaptation for Goods Vehicles, Buses, Special Vehicles and Trailers... 14
5 General Topics for Adaptation for Motorcycles... 14
5.1 Objectives... 14
5.2 General... 14
6 Safety Culture... 16
6.1 Objective... 16
6.2 Requirements and Recommendations... 16
7 Confirmation Measures... 17
7.1 Objective... 17
7.2 Requirements and Recommendations... 18
8 Hazard Analysis and Risk Assessment... 22
8.1 Objectives... 22
8.2 General... 23
8.3 Input to This Chapter... 23
8.4 Requirements and Recommendations... 24
8.5 Work Products... 30
9 Vehicle Integration and Testing... 31
9.1 Objective... 31
9.2 Requirements and Recommendations... 31
10 Safety Validation... 34
10.1 Objective... 34
10.2 General... 34
10.3 Inputs to This Chapter... 34
10.4 Requirements and Recommendations... 35
10.5 Work Products... 37
Appendix A (informative) Overview of and Workflow of Adaptation of GB/T 34590 for
Motorcycles... 38
Appendix B (informative) Hazard Analysis and Risk Assessment for Motorcycles... 45
Appendix C (informative) Example of Controllability Classification Techniques... 56
Bibliography... 60
Foreword
This document was drafted in accordance with the rules provided in GB/T 1.1-2020 Directives
for Standardization - Part 1.Rules for the Structure and Drafting of Standardizing Documents.
This document is Part 12 of GB/T 34590 Road Vehicles - Functional Safety. GB/T 34590 has
issued the following parts.
-- Part 1.Vocabulary;
-- Part 2.Management of Functional Safety;
-- Part 3.Concept Phase;
-- Part 4.Product Development at the System Level;
-- Part 5.Product Development at the Hardware Level;
-- Part 6.Product Development at the Software Level;
-- Part 7.Production, Operation, Service and Decommissioning;
-- Part 8.Supporting Processes;
-- Part 9.Automotive Safety Integrity Level (ASIL)-oriented and Safety-oriented Analyses;
-- Part 10.Guideline;
-- Part 11.Guidelines on Applications to Semiconductors;
-- Part 12.Adaptation for Motorcycles.
This document has been modified using ISO 26262-12.2018 Road Vehicles - Functional Safety
- Part 12.Adaptation of ISO 26262 for Motorcycles.
The technical differences between this document and ISO 26262-12.2018, and the causes for
these differences are as follows.
-- The normative reference GB/T 34590.1-2022 is used to replace ISO 26262-1, so as to
adapt to the technical conditions of China and enhance the operability (see Chapter 3);
---The description of T&B is modified from “truck, bus, trailer and semi-trailer” into
“goods vehicle, bus, special vehicle, trailer” (see 4.6; 4.6 of ISO 26262-8.2018), so as
to maintain the consistency with the types of vehicles specified in GB/T 3730.1-2022
Terms and Definitions of Motor Vehicles, Trailers and Combination Vehicle - Part 1.
Types;
---The description of “stress test” is modified from “stress tests” into “stress tests (such as.
high load test and high environment test)” (see 10.4.3.4);
---The description of a suitable rationale for the CCP selection is modified from “a suitable
rationale can be provided for the CCP selected” into “a suitable rationale shall be
provided for the CCP selected” (see C.2).
This document also makes the following editorial modifications.
-- The sequence of paragraphs in the Scope is adjusted;
---The sub-clauses 8.4.5.1, 10.4.2.1 and 10.4.4.1 are deleted;
---The Introduction and its expression of the International standard are modified.
Please be noted that certain content of this document may involve patents. The institution
issuing this document does not undertake the responsibility of identifying these patents.
This document was proposed by the Ministry of Industry and Information Technology of the
People’s Republic of China.
This document shall be under the jurisdiction of National Technical Committee 114 on Auto of
Standardization Administration of China (SAC/TC 114).
The drafting organizations of this document. China Automotive Technology and Research
Center Co., Ltd.; Tianjin Internal Combustion Engine Research Institute (Tianjin Motorcycle
Technology Center); CCIC West Co., Ltd.; BOSCH Auto Parts (Suzhou) Co., Ltd.; Hitachi
Astemo Automotive Electronics (Shanghai) Co., Ltd.; Schaeffler (China) Co., Ltd.; Hella
Shanghai Electronics Co., Ltd.; CRRCTIMES Electric Vehicle Co., Ltd.; BYD Auto Industry
Co., Ltd.; Hubei e-CarX Technology Co., Ltd.; Suzhou Inovance United Power System Co.,
Ltd.; United Automotive Electronic Systems; Beijing Borgward Automotive Co., Ltd.
The main drafters of this document. Guo Lingsong, Fu Yue, Li Bo, Zhang Liwei, Qu Yuanning,
Tian Zhihui, Jiang Zhaojuan, Yu Jianye, Li Yong, Ma Fangping, Zhao Jinfu, Liu Chang, Zheng
Yan, Wang Yu, Zhao Tianli.
1 Scope
This document specifies the requirements for adaptation for motorcycles, including the
following.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition cited
applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 34590.1-2022 Road Vehicles - Functional Safety - Part 1.Vocabulary (ISO 26262-1.2018,
MOD)
3 Terms and Definitions
The terms and definitions defined in GB/T 34590.1-2022 are applicable to this document.
4 Requirements for Compliance
The results of safety activities are given as work products. “Prerequisites” are information
which shall be available as work products of a previous phase. Given that certain requirements
of a clause are ASIL-dependent or may be tailored, certain work products may not be needed
as prerequisites.
For items or elements of motorcycles for which requirements of this document are applicable,
the requirements of this document supersede the corresponding requirements in other parts.
5 General Topics for Adaptation for Motorcycles
The objective of this chapter is to give an overview of the adaptation of GB/T 34590 for
motorcycles.
The specific requirements for motorcycles described in this document correspond to
requirements of GB/T 34590.2-2022, 5.4.2 and 6.4.9; requirements in GB/T 34590.3-2022,
Chapter 6 and Appendix B; and requirements in GB/T 34590.4-2022, 7.4.4 and Chapter 8.
6 Safety Culture
The organization shall ensure that the persons responsible for achieving or maintaining
functional safety, or for performing or supporting the safety activities, are given sufficient
authority to fulfil their responsibilities.
7 Confirmation Measures
The objective of this chapter is to define the independency requirements of confirmation
measures associated with ASIL.
8 Hazard Analysis and Risk Assessment
Hazard analysis, risk assessment and MSIL determination are used to determine the safety goals
for the item. For this, the item is evaluated with regard to its potential hazardous events. Safety
goals and their assigned MSIL are determined by a systematic evaluation of hazardous events.
9 Vehicle Integration and Testing
This chapter provides a tailoring of GB/T 34590.4-2022, 7.4.4 for motorcycles.
Vehicle integration is the integration of the item with other systems within a vehicle and with
the vehicle itself.
...... Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 34590.12-2022 be delivered?Answer: The full copy PDF of English version of GB/T 34590.12-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 34590.12-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34590.12-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 34590.12-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.
How to buy and download a true PDF of English version of GB/T 34590.12-2022?A step-by-step guide to download PDF of GB/T 34590.12-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD). Step 2: Search keyword "GB/T 34590.12-2022". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|