GB/T 32129-2015 PDF in English
GB/T 32129-2015 (GB/T32129-2015, GBT 32129-2015, GBT32129-2015)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 32129-2015 | English | 125 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Halogen free low smoke and flame-retardant compounds for wires and cables
| Valid |
Standards related to (historical): GB/T 32129-2015
PDF Preview
GB/T 32129-2015: PDF in English (GBT 32129-2015) GB/T 32129-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.060.01
K 13
Halogen Free Low Smoke and Flame-retardant
Compounds for Wires and Cables
ISSUED ON. OCTOBER 9, 2015
IMPLEMENTED ON. MAY 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 4
1 Application Scope ... 5
2 Normative References ... 5
3 Product Classification ... 6
3.1 Codes ... 6
3.2 Designation system ... 7
4 Technical Requirements ... 8
4.1 Appearance ... 8
4.2 Colours ... 8
4.3 Properties ... 8
5 Test Methods ... 15
5.1 Appearance inspection... 15
5.2 Specimen preparation ... 16
5.3 Tensile strength and elongation at break ... 16
5.4 Air oven thermal ageing ... 16
5.5 Deformation at 100% fixed elongation ... 17
5.6 Thermal deformation ... 18
5.7 Volume resistivity ... 18
5.8 Dielectric strength ... 18
5.9 Thermal impact resistance ... 18
5.10 Hot set ... 18
5.11 Impact brittleness temperature ... 18
5.12 Ozone resistance ... 19
5.13 Hot water immersion ... 19
5.14 Oxygen index ... 19
5.15 Vertical burning ... 19
5.16 Smoke density ... 19
5.17 Content of HCl and HBr ... 19
5.18 HF content ... 19
5.19 PH value and conductivity ... 20
5.20 Toxic hazard of smoke generated by material ... 20
6 Inspection Rules ... 20
6.1 Inspection classification ... 20
6.2 Ex-factory inspection ... 20
6.3 Type inspection ... 20
6.4 Batch grouping and sampling rules ... 21
6.5 Acceptance criteria ... 21
7 Packaging, Marking, Transportation, Storage ... 21
7.1 Packaging ... 21
7.2 Marking ... 21
7.3 Transportation ... 22
7.4 Storage ... 22
Annex A (Normative) Thermal Shock Resistance Test Method ... 23
Bibliography ... 25
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard was proposed by China Electrical Equipment Industry Association.
This Standard shall be under the jurisdiction of the National Standardization Technical
Committee on Wire and Cable (SAC/TC 213).
The responsible drafting organizations of this Standard. Hengtong Group Suzhou
Hengtong Communication Materials Co., Ltd., Shanghai Electric Cable Research
Institute.
The contributory drafting organizations of this Standard. Shanghai Kaibo Co., Ltd.,
Changshu Zhonglian Photoelectric New Material Co., Ltd., CGN- Delta (Suzhou)
Polymer Co., Ltd., Shanghai Zhizhengdaohua High Polymer Material Co., Ltd., Wuxi
Jake Plastics Co., Ltd., Linhai Yadong Special Cable Material Factory, Hangzhou
Gaoxin Insulating Material Co., Ltd., Yangzhou Landu Plastics Technology Co., Ltd.,
Hebei Zhonglian Plastics Technological Development Co., Ltd., DSM Engineering
Plastics (Jiangsu) Co., Ltd.
The main drafters of this Standard. Zhang Xianling, Guo Hanyang, Xiang Jian, Zhang
Ermei, Shan Yongdong, Shi Dongmei, You Yong, Zhang Kai, Zhou Jianshen, Wang
Zhiyong, Wei Hejun, Shu Jiuni, Shi Jianshe, Ding Xiaoqing.
Halogen Free Low Smoke and Flame-retardant
Compounds for Wires and Cables
1 Application Scope
This Standard specifies the classification, technical requirements, test methods,
inspection rules and packaging, marking, transportation and storage of halogen free
low smoke and flame-retardant compounds for wires and cables.
This Standard applies to sheath for halogen free low smoke and flame-retardant wires
and cables and optical cables, and insulation for halogen free low smoke and flame-
retardant wires and cables of rated voltage 3 kV and below.
This Standard applies to halogen free low smoke and flame-retardant compounds for
wires and cables, which is made by adding halogen free fire retardants and other
performance additives to one or multiple halogen free polymer or copolymer and by
mixing, plasticification, granulation.
This Standard applies to thermoplastic and cross-linking type halogen free low smoke
fire-retardant compounds for wires and cables.
NOTE For cross-linking products, the specified properties refer to the properties of material
after cross linking.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this Standard.
GB/T 1040.3-2006, Plastics – Determination of Tensile Properties – Part 3. Test
Conditions for Films and Sheets
GB/T 1408.1-2006, Electrical Strength of Insulating Materials – Test Methods – Part
1. Tests at Power Frequencies
GB/T 1410-2006, Methods of Test for Volume Resistivity and Surface Resistivity of
Solid Electrical Insulating Materials
GB/T 2406.2-2009, Plastics – Determination of Burning Behaviour by Oxygen Index
– Part 2. Ambient-temperature Test
GB/T 2408-2008, Plastics – Determination of Burning Characteristics – Horizontal
elastomer compounds for sheath are designated as WDZ-TPU-H70.
EXAMPLE 3 125°C halogen free low smoke fire-retardant cross-linking polyolefin compounds
for insulation are designated as WDZ-YJ-J125.
4 Technical Requirements
4.1 Appearance
Halogen free low smoke fire-retardant compounds for wires and cables shall have
good plasticization and uniform colour, and shall be cylinder-shaped grains of diameter
about 3 mm ~ 4 mm and height 3 mm or of any other shape as agreed on by the
supplier and the purchaser.
4.2 Colours
The colours of halogen free low smoke fire-retardant compounds for sheath are black,
white, natural colour, grey and so on.
The colours of halogen free low smoke fire-retardant compounds for insulation are
black, white, natural colour, red, yellow, blue, green, orange, grey, brown and so on.
Any other colour can be as agreed on by the supplier and the purchaser.
4.3 Properties
4.3.1 The properties of halogen free low smoke fire-retardant thermoplastic polyolefin
compounds for insulation and sheath shall be as specified in Table 1.
4.3.2 The properties of halogen free low smoke fire-retardant thermoplastic
elastomer compounds for insulation and sheath shall be as specified in Table 2...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|