GB/T 30803-2014 PDF English
Search result: GB/T 30803-2014
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 30803-2014 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Thermal insulation products for building applications -- Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
| Valid |
GB/T 30803-2014: PDF in English (GBT 30803-2014) GB/T 30803-2014
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 91.120.10
Q 25
GB/T 30803-2014 / ISO 29804.2009
Thermal insulation products for building applications -
Determination of the tensile bond strength of the
adhesive and of the base coat to the thermal
insulation material
(ISO 29804.2009, IDT)
ISSUED ON. JUNE 24, 2014
IMPLEMENTED ON. FEBRUARY 1, 2015
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions, symbols and units ... 5
4 Principle... 5
5 Apparatus ... 5
6 Test specimens ... 6
7 Procedure ... 7
8 Calculation and expression of results ... 8
9 Accuracy of measurement ... 8
10 Test report ... 8
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard uses translation method to make it identical with ISO 29804.2009
Thermal insulation products for building applications - Determination of the
tensile bond strength of the adhesive and of the base coat to the thermal
insulation material.
This Standard was proposed by China Building Materials Federation.
This Standard shall be under the jurisdiction of National Technical Committee
on Insulation Material of Standardization Administration of China (SAC/TC 191).
The drafting organizations of this Standard. Nanjing Glass Fiber Research &
Design Institute Co., Ltd., National Glass Fiber Products Quality Supervision
and Inspection Center.
Main drafters of this Standard. Fang Yunwei, Hao Zhengtao, Ma Dan, Xu Qi,
Chen Jianming, Huang Ying, Cui Jun, Xu Min, Li Junguang.
Thermal insulation products for building applications -
Determination of the tensile bond strength of the
adhesive and of the base coat to the thermal
insulation material
1 Scope
This Standard specifies equipment and procedures for determining the tensile
bond strength of the adhesive and of the base coat to the thermal insulation
material.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
ISO 3251 Paints, varnishes and plastics - Determination of non-volatile
matter content
ISO 3451-1 Plastics - Determination of ash - Part 1. General methods
ISO 9229 Thermal insulation - Vocabulary
ISO 29466 Thermal insulating products for building applications -
Determination of thickness
ISO 29470 Thermal insulating products for building applications -
Determination of the apparent density
ISO 29765 Thermal insulating products for building applications -
Determination of tensile strength perpendicular to faces
EN 13499 Thermal insulation products for buildings - External thermal
insulation composite systems (ETICS) based on expanded polystyrene -
Specification
in the laboratory, but need not be recorded in the report.
d) test results.
1) all individual values and the mean value of the tensile bond strength;
2) a description of the mode of failures.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
PDF Preview: GB/T 30803-2014
|