Powered by Google www.ChineseStandard.net Database: 189759 (9 Jun 2024)

GB/T 28679-2012 PDF in English

GB/T 28679-2012 (GB/T28679-2012, GBT 28679-2012, GBT28679-2012)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 28679-2012English130 Add to Cart 0-9 seconds. Auto-delivery. Remanufacturing of automotive components -- Assembly Valid

Standards related to: GB/T 28679-2012

GB/T 28679-2012: PDF in English (GBT 28679-2012)

GB/T 28679-2012
ICS 43.020
T 40
Remanufacturing of Automotive Components -
Issued by: General Administration of Quality Supervision, Inspection and
Standardization Administration of the People’s Republic of
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative References ... 4 
3 Terms and Definitions ... 4 
4 Basic Requirements for Assembly ... 4 
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
This Standard was proposed by Ministry of Industry and Information Technology of the
People’s Republic of China.
This Standard shall be under the jurisdiction of National Technical Committee 114 on
Road Vehicles of Standardization Administration of China (SAC/TC 114).
The drafting organizations of this Standard: Dongfeng Motor Corporation; SINOTRUK
Jinan Fuqiang Power Co., Ltd.; Guangzhou Huadu Worldwide Transmission Co., Ltd.;
China Automotive Technology & Research Center Co., Ltd.; China Association of
Automobile Manufacturers; Technical Center of China FAW Group Corporation; Great
Wall Motor Co., Ltd.; Weichai Power (Weifang) Remanufacturing Co., Ltd.; Shanghai
Automotive Industry Corporation (Group); Yuchai Remanufacturing Industry (Suzhou)
Co., Ltd.
The main drafters of this Standard: Hu Tao, Ma Mingchang, Wang Deqian, Zhou
Zhengbing, Liu Yanrong, Yan Yiping, Yang Yimin, Yang Jie, Zhang Guorong, Yao
Honghua, Chen Qi.
Remanufacturing of Automotive Components -
1 Scope
This Standard specifies the terms and definitions of remanufacturing of automotive
components - assembly, as well as the basic requirements for assembly, etc.
This Standard is applicable to the assembly of the remanufacturing of automotive
components. The assembly of the remanufacturing of other motor vehicle parts may
take this as a reference.
2 Normative References
The following documents are indispensable to the application of this document. In
terms of references with a specified date, only versions with a specified date are
applicable to this document. In terms of references without a specified date, the latest
version (including all the modifications) is applicable to this document.
GB/T 26989 Automobile Recovery - Terminology
3 Terms and Definitions
The terms and definitions defined in GB/T 26989 are applicable to this Standard.
4 Basic Requirements for Assembly
4.1 The assembly environment of the parts shall comply with the stipulations of
corresponding processes.
4.2 Before assembly, the parts shall be cleaned or rinsed.
4.3 The parts to be installed on the site of assembly must be qualified products.
4.4 During assembly, the remanufactured parts shall have assembly records, and the
record retention period shall not be less than the record period of new products.
4.5 When new parts and components must be adopted, it shall strictly follow the
relevant stipulations.
4.6 The assembly shall be carried out in accordance with the specified process
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.