GB/T 28677-2012 PDF in English
GB/T 28677-2012 (GB/T28677-2012, GBT 28677-2012, GBT28677-2012)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 28677-2012 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Remanufacturing of automotive components -- Cleaning
| Valid |
Standards related to (historical): GB/T 28677-2012
PDF Preview
GB/T 28677-2012: PDF in English (GBT 28677-2012) GB/T 28677-2012
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
T 40
Remanufacturing of Automotive Components -
Cleaning
ISSUED ON: SEPTEMBER 3, 2012
IMPLEMENTED ON: JANUARY 1, 2013
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 4
4 General Requirements for Cleaning ... 4
5 General Cleaning and Classification Methods ... 5
6 Commonly Used Cleaning Methods ... 5
Foreword
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
This Standard was proposed by Ministry of Industry and Information Technology of the
People’s Republic of China.
This Standard shall be under the jurisdiction of National Technical Committee 114 on
Road Vehicles of Standardization Administration of China (SAC/TC 114).
The drafting organizations of this Standard: No. 6456 Factory of People’s Liberation
Army of China; Guangzhou Huadu Worldwide Transmission Co., Ltd.; SINOTRUK
Jinan Fuqiang Power Co., Ltd.; China Automotive Technology & Research Center Co.,
Ltd.; China Association of Automobile Manufacturers; Shanghai Automotive Industry
Corporation (Group); Dongfeng Motor Corporation; Weichai Power (Weifang)
Remanufacturing Co., Ltd.; China FAW Group Corporation; Yuchai Remanufacturing
Industry (Suzhou) Co., Ltd.
The main drafters of this Standard: Song Tiejun, Han Hongbing, Fu Jianxin, Huang
Zhiyong, Luo Jianming, Liu Yanrong, Yan Yiping, Bu Xinwen, Yao Honghua, Hu Tao,
Zhang Guorong, Kong Xiaoli, Chen Qi.
Remanufacturing of Automotive Components -
Cleaning
1 Scope
This Standard specifies the terms and definitions of remanufacturing of automotive
components - cleaning, as well as the general requirements, general cleaning
classification methods and commonly used cleaning methods, etc.
This Standard is applicable to the cleaning of the remanufacturing of automotive
components. The cleaning of the remanufacturing of other motor vehicle parts may
take this as a reference.
2 Normative References
The following documents are indispensable to the application of this document. In
terms of references with a specified date, only versions with a specified date are
applicable to this document. In terms of references without a specified date, the latest
version (including all the modifications) is applicable to this document.
GB/T 26989 Automobile Recovery - Terminology
3 Terms and Definitions
The terms and definitions defined in GB/T 26989 are applicable to this Standard.
4 General Requirements for Cleaning
4.1 Requirements for Cleanliness
4.1.1 In accordance with different conditions during cleaning, different cleaning
methods are adopted to ensure that the requirements for cleanliness are met.
4.1.2 The cleanliness of various parts shall satisfy the cleanliness requirements of
product design.
4.1.3 For the surface of sprayed, brush electroplated and bonded parts, the cleanliness
shall satisfy the requirements of remanufacturing design.
4.2 Anti-corrosion Requirements
In the cleaning of parts, it is necessary to prevent the parts from corroding. For
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|