Powered by Google www.ChineseStandard.net Database: 189760 (25 May 2024)

GB/T 28676-2012 PDF in English


GB/T 28676-2012 (GB/T28676-2012, GBT 28676-2012, GBT28676-2012)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 28676-2012English90 Add to Cart 0-9 seconds. Auto-delivery. Remanufacturing of automotive components -- Classification Valid


Standards related to: GB/T 28676-2012

GB/T 28676-2012: PDF in English (GBT 28676-2012)

GB/T 28676-2012
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
T 40
Remanufacturing of Automotive Components -
Classification
ISSUED ON: SEPTEMBER 3, 2012
IMPLEMENTED ON: JANUARY 1, 2013
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative References ... 4 
3 Terms and Definitions ... 4 
4 Classification of Components... 5 
5 General Requirements ... 5 
6 Commonly Used Classification and Inspection Techniques ... 5 
Foreword
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
This Standard was proposed by Ministry of Industry and Information Technology of the
People’s Republic of China.
This Standard shall be under the jurisdiction of National Technical Committee 114 on
Road Vehicles of Standardization Administration of China (SAC/TC 114).
The drafting organizations of this Standard: SINOTRUK Jinan Fuqiang Power Co., Ltd.;
Guangzhou Huadu Worldwide Transmission Co., Ltd.; Shanghai Automotive Industry
Corporation (Group); China Automotive Technology & Research Center Co., Ltd.;
China Association of Automobile Manufacturers; Dongfeng Motor Corporation; CHERY
Automobile Co., Ltd.; Yuchai Remanufacturing Industry (Suzhou) Co., Ltd.; Technical
Center of China FAW Group Corporation; Shanghai Entry-Exit Inspection and
Quarantine Bureau.
The main drafters of this Standard: Luo Jianming, Huang Tie, Zhou Zhengbing, Hu
Jixian, Gao Juzhen, Liu Yanrong, Yan Yiping, Li ZHongbing, Liu Libing, Chen Qi, Kong
Xiaoli, Wu Yiwen, Fan Dongying.
Remanufacturing of Automotive Components -
Classification
1 Scope
This Standard specifies the terms and definitions of remanufacturing of automotive
components, and the classification, general requirements and commonly used
classification and inspection techniques of components, etc.
This Standard is applicable to the classification of the remanufacturing of automotive
components. The classification of the remanufacturing of other motor vehicle parts may
take this as a reference.
2 Normative References
The following documents are indispensable to the application of this document. In
terms of references with a specified date, only versions with a specified date are
applicable to this document. In terms of references without a specified date, the latest
version (including all the modifications) is applicable to this document.
GB/T 26989 Automobile Recovery - Terminology
3 Terms and Definitions
What is defined in GB/T 26989, and the following terms and definitions are applicable
to this Standard.
3.1 Directly Usable Parts
Directly usable parts refer to old parts that do not need repair machining and can satisfy
the requirements of remanufacturing and use only through surface treatment
processes, such as: cleaning and sandblasting, etc. through the confirmation by
inspection.
3.2 Re-manufacturable Parts
Re-manufacturable parts refer to old parts that can satisfy the requirements of
remanufacturing and use through the process of repair and machining through the
confirmation by inspection.
3.3 Disused Parts
......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.