GB/T 20066-2006 PDF English
US$135.00 · In stock · Download in 9 secondsGB/T 20066-2006: Steel and iron -- Sampling and preparation of samples for the determination of chemical composition Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 20066-2006 | English | 135 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 20066-2006
GB/T 20066-2006: Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT20066-2006
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 77.080.01
H 04
GB/T 20066-2006 / ISO 14284.1996
Replacing GB/T 719-1984, Partially replacing GB/T 222-1984
Steel and iron - Sampling and preparation of samples
for the determination of chemical composition
(ISO 14824.1996, IDT)
Issued on. FEBRUARY 5, 2006
Implemented on. AUGUST 1, 2006
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword... 4
1 Scope... 6
2 Normative references... 6
3 Definitions... 6
4 Requirements for sampling and sample preparation... 9
4.1 General... 9
4.2 Sample... 10
4.3 Selection of a sample... 12
4.4 Preparation of a sample... 13
4.5 Safety precautions... 17
5 Liquid iron for steelmaking and pig-iron production... 18
5.1 General... 18
5.2 Spoon sampling... 18
5.3 Probe sampling... 20
5.4 Preparation of a sample for analysis... 20
6 Liquid iron for cast iron production... 22
6.1 General... 22
6.2 Spoon sampling... 22
6.3 Probe sampling... 24
6.4 Preparation of a sample for analysis... 25
6.5 Sampling and sample preparation for the determination of oxygen, nitrogen and hydrogen
... 27
7 Liquid steel for steel production... 28
7.1 General... 28
7.2 Spoon sampling... 28
7.3 Probe sampling... 29
7.4 Preparation of a sample for analysis... 30
7.5 Sampling and sample preparation for the determination of oxygen... 31
7.6 Sampling and sample preparation for the determination of hydrogen... 32
8 Pig-irons... 34
8.1 General... 34
8.2 Increment sampling... 34
8.3 Preparation of a sample for analysis... 36
9 Cast-iron products... 38
9.1 General... 38
9.2 Sampling and sample preparation... 39
10 Steel products... 42
10.1 General... 42
10.2 Selection of a preliminary sample or a sample for analysis from a cast product... 42
10.3 Selection of a preliminary sample r a sample for analysis from a wrought product... 42
10.4 Preparation of a sample for analysis... 45
10.5 Sampling of leaded steel... 46
10.6 Sampling and sample preparation for the determination of oxygen... 46
10.7 Sampling and sample preparation for the determination of hydrogen... 48
Annex A (Informative) Sampling probes for use with liquid iron and steel... 50
A.1 General... 50
A.2 Immersion sampling probes... 50
A.3 Stream-sampling probes... 54
A.4 Suction sampling probes... 55
A.5 Deoxidation systems for sampling probes... 55
A.6 Quality of sample... 56
Annex B (Informative) Sampling probes for use with liquid steel for the
determination of hydrogen... 58
B.1 General... 58
B.2 Immersion sampling probes... 58
B.3 Suction sampling probes... 59
Foreword
Steel and iron - sampling and preparation of samples for the determination of
chemical composition is not a key link to accurately, objectively and
comprehensively reflect the quality of steel product, but also an important link
of quality control during the production process.
This Standard identically uses ISO 14824.1996 Steel and iron - Sampling and
preparation of samples for the determination of chemical composition (English
version).
This Standard replaces the part of sampling method for samples of chemical
analysis of steel in GB/T 222-1984 Sampling method for chemical analysis of
steel and allowable deviation of chemical composition of finished product and
GB/T 719-1984 Sampling method for sample analysis of pig iron chemical
analysis.
Compared this Standard with the relevant part of GB/T 222-1984 and GB/T 719-
1984, there are great differences. About the sampling method for analysis of
chemical composition for the determination of chemical composition of steel,
the original standard only made a principle or a simple provision on sample
representation, sampling timing, location, number of samples, size and cleaning
requirements. It did not specify the method for preparing sample for the
determination of chemical composition of steel. However, this Standard not only
clearly specifies these respects, it also made detailed and specific provisions
on sampling equipment, operating procedures (including process diagrams)
and operating conditions, sample storage, identification, safety and hygiene, as
well as different requirements for chemical analysis, thermal analysis and
physical analysis of samples, different requirements for determination of
hydrogen, oxygen, nitrogen and other different elements of the sample.
Annex A and Annex B of this Standard are informative.
This Standard was proposed by National Technical Committee on Steel of
Standardization Administration of China.
This Standard shall be under the jurisdiction of National Technical Committee
on Steel of Standardization Administration of China.
Drafting organization of this Standard. Metallurgical Industry Information
Standards Institute.
Main drafters of this Standard. Chen Zibin, Wu Qiansi.
Versions of standard substituted by this Standard are.
GB/T 719-1984, GB/T 222-1984, GB/T 222-1963.
Steel and iron - Sampling and preparation of samples
for the determination of chemical composition
1 Scope
This Standard specifies methods for sampling and sample preparation for the
determination of the chemical composition of pig iron, cast iron and steel.
Methods are specified for use with both liquid and solid metal.
2 Normative references
The following standards contain the provisions which, through reference in this
Standard, constitute the provisions of this Standard. For dated references,
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, the parties who enter into agreement based on this
Standard are encouraged to investigate whether the latest versions of these
documents are applicable. For undated reference documents, the latest
versions apply to this Standard.
3 Definitions
For the purposes of this Standard, the following definitions apply.
method in which the sample is taken from the melt, or during the pouring of the
melt, using a long-handled spoon, and cast into a small mould
4 Requirements for sampling and sample preparation
Sampling practices shall be designed to provide a sample for analysis that is
representative of the mean chemical composition of the melt or the sample
product.
5 Liquid iron for steelmaking and pig-iron production
For sampling from a melt, immerse a preheated steel spoon into the melt and
fill with liquid iron. Withdraw the spoon and remove any slag by skimming the
surface of the liquid iron in the spoon.
Particular care is required when preparing the surface of thin samples. A chuck
shall be specially designed to hold the sample securely grinding and linishing
operations.
6 Liquid iron for cast iron production
In batch processes, two or more samples should be taken from melting furnaces,
preferably when approximately one-third and two-thirds of the melt has been
discharged, and an average analysis determined. In continuous processes,
samples should be taken at regular intervals of time.
7 Liquid steel for steel production
For sampling stainless steel, a refractory ring placed on a cast iron plate may
be used as a mould; the ring should have a wall thickness of 10 mm to 12 mm.
The sample is removed from the mould by breaking off the refractory.
Some tundishes may contain a sufficient depth of liquid metal to permit the use
of an immersion sampling probe.
8 Pig-irons
In the case of a stockpile, throw a rope having a certain number of knots onto
the pile and take the pigs touched by these knots. Repeat the operation until a
sufficient number of pigs is obtained.
9 Cast-iron products
In the case of a hollow casting such as a pipe, drill completely through the
wall of the pipe at each end and in the middle, with the axes of the three
drill holes at 120° to each other.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 20066-2006 be delivered?Answer: The full copy PDF of English version of GB/T 20066-2006 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 20066-2006_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20066-2006_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 20066-2006 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 20066-2006?A step-by-step guide to download PDF of GB/T 20066-2006_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 20066-2006".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|