|
US$219.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 45647-2025: Technical specification for carbon dioxide recovery and disposal in metallurgical lime kiln
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 45647-2025 | English | 219 |
Add to Cart
|
3 days [Need to translate]
|
Technical specification for carbon dioxide recovery and disposal in metallurgical lime kiln
| Valid |
GB/T 45647-2025
|
PDF similar to GB/T 45647-2025
Basic data | Standard ID | GB/T 45647-2025 (GB/T45647-2025) | | Description (Translated English) | Technical specification for carbon dioxide recovery and disposal in metallurgical lime kiln | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H04 | | Classification of International Standard | 77.010 | | Word Count Estimation | 10,181 | | Date of Issue | 2025-04-25 | | Date of Implementation | 2025-11-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 45647-2025: Technical specification for carbon dioxide recovery and disposal in metallurgical lime kiln
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 77-010
CCSH04
National Standard of the People's Republic of China
Carbon dioxide recovery and disposal in metallurgical lime kilns
Technical Specifications
2025-11-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Iron and Steel Association.
This document is under the jurisdiction of the National Technical Committee on Steel Standardization (SAC/TC183).
This document was drafted by. University of Science and Technology Beijing, Chengdu Yizhi Technology Co., Ltd., Sinosteel Equipment Co., Ltd., Qianyida Group Co., Ltd.
Co., Ltd., Jiangsu Binxin Iron and Steel Group Co., Ltd., Metallurgical Industry Information Standards Research Institute, Xuanhua Iron and Steel Group Co., Ltd., Shougang
Jingtang Iron and Steel United Co., Ltd., Jigang Group International Engineering Technology Co., Ltd., Beijing Jinding Energy Technology Co., Ltd., Shandong
Steel Group Rizhao Co., Ltd.
The main drafters of this document are. Feng Chao, Zhu Rong, Pan Junru, Jin Feng, Wang Yuanyuan, Lin Tao, Wang Jiangwei, Tu Mingwei, Wang Xiaodong, Chen Jian, Dong Kai,
Ma Chao, Qiu Jinhui, Luan Yuandi, Wei Guangsheng, Hu Lin, Wang Weiye, Zhang Baozhu, Liu Fuhai, Chen Huiying, Wang Hongbin, Zhang Ruopeng, Yang Huapeng, Li Houyong,
Liu Runzao, Liu Wenyuan, Zhang Chunmin, Guo Feihong, Wen Fuxin, Yu Jingyao, Zhang Yuanchun.
Carbon dioxide recovery and disposal in metallurgical lime kilns
Technical Specifications
1 Scope
This document specifies the basic provisions, technical process flow, process technology requirements, equipment requirements, and other requirements for the recovery and disposal of carbon dioxide in metallurgical lime kilns.
and safety protection requirements.
This document is applicable to the carbon dioxide recovery and disposal system in the flue gas of lime kilns in the metallurgical industry. Carbon dioxide recovery and disposal in flue gas of other furnaces
The system is implemented as a reference.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 150 (all parts) Pressure vessels
GB/T 151 Heat Exchanger
GB/T 711 High-quality carbon structural steel hot-rolled plates and strips
GB 2894 Safety signs and their use guidelines
GB 4053 (all parts) Safety requirements for fixed steel ladders and platforms
GB/T 4732 (all parts) Analysis and design of pressure vessels
GB/T 12337 Steel spherical storage tanks
GB 12348 Environmental noise emission standard for industrial enterprises
GB 13456 Discharge standard of water pollutants for the iron and steel industry
GB 18599 Pollution control standard for storage and landfill of general industrial solid waste
GB/T 20878 Stainless steel grades and chemical compositions
GB/T 37400.12 General technical requirements for heavy machinery Part 12.Painting
GB 50264 Design specification for thermal insulation engineering of industrial equipment and pipelines
GB 50316 Industrial Metal Pipeline Design Specification
GB/T 50770 Design specification for safety instrument systems in petrochemical industry
GB/T 51316 Flue gas carbon dioxide capture and purification engineering design standard
HG/T 20507 Automation Instrumentation Design Specification
HG/T 20509 Instrument power supply design specification
HG/T 20513 Instrument system grounding design specification
NB/T 47004.1 Plate heat exchangers Part 1.Detachable plate heat exchangers
NB/T 47014 Welding procedure qualification for pressure equipment
SH/T 3092 Petrochemical Distributed Control System Design Specification
SH/T 3202 Carbon dioxide transmission pipeline engineering design standard
TSG21 Safety Technical Supervision Regulations for Stationary Pressure Vessels
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 45647-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 45647-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 45647-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 45647-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|