GB/T 18801-2015 (GB/T18801-2015)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Name of Chinese Standard	Status
GB/T 18801-2015	English	145	Add to Cart	0-9 seconds. Auto-delivery.	Air cleaner	Obsolete

GB/T 18801-2015: PDF in English (GBT 18801-2015)

GB/T 18801-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 97.080
Y 62
Replacing GB/T 18801-2008
Air cleaner
空气净化器
ISSUED ON. SEPTEMBER 15, 2015
IMPLEMENTED ON. MARCH 01, 2016
Issued by.
General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative References ... 5 
3 Terms and Definitions ... 6 
4 Model and Naming Method ... 8 
5 Requirements ... 8 
6 Test Method ... 10 
7 Inspection Rules ... 13 
8 Marks, Instructions for Use, Packaging, Transportation and Storage ... 15 
Annex A (Informative) Test Chamber... 18 
Annex B (Normative) Test Method for Clean Air Delivery Rate of
Particulates ... 23 
Annex C (Normative) Test Method for Clean Air Delivery Rate of Gaseous
Pollutants ... 28 
Annex D (Normative) Test Method for Cumulate Clean Mass of Particulates
... 31 
Annex E (Informative) Test Method for Cumulate Clean Mass of Gaseous
Pollutant ... 33 
Annex F (Informative) Calculation Method for Effective Room Size ... 35 
Annex G (Informative) Conversion Method for Cumulate Clean Mass and
Cleaning Life Span ... 38 
Annex H (Informative) Test Method for Cleaning Capacity of Air Duct
Cleaning Device ... 43 
Bibliography ... 51 
Foreword
This Standard is drafted according to the rules provided in GB/T 1.1-2009.
This Standard replaces GB/T 18801-2008 “Air Cleaner”.
The main technical differences between this Standard and GB/T 18801-2008 are as follows.
— In Chapter 1 “Scope”, make new provisions for the application scope (including the
operating principle of the air cleaner) of this Standard and the use scope of the
references; list “small portable air cleaner, air cleaners for passenger vehicles, air
duct cleaning device and other similar air cleaning products” in the scope that may
be executed by reference to this Standard;
— Supplement the relevant references in Chapter 2 “Normative References”;
— Add the classification description for “target pollutants” in Chapter 3 “Terms and
Definitions”; add “rated condition”, “standby condition”, “standby power”, “cumulate
clean mass”, “effective room size” and other contents; supplement the explanation
for “test chamber” (Annex A) and “cleaning life span”;
— Change “product classification” in the original Chapter 4 to “model and designation”;
and make new provisions for the designation method;
— Delete the requirements to “appearance” in Chapter 5; add the requirements to “5.1
Release of harmful substances”, “5.2 Standby power”, "5.4 cumulate clean mass”
and “5.7 Removal of microbes”; and adjust the indexes of “5.5 Cleaning energy
efficiency” and “6 Noise”;
— Respectively put forward the specific requirements to the tests for the target
pollutants of different natures in “5.3 Clean air delivery rate”;
— Add and detail the relevant contents of “6.1 General test conditions” in Chapter 6
“Test Methods”; specify the relevant contents of “6.2 Test equipment” in detail; put
forward the requirements for the standard pollutants for testing (see 6.3);
— Add the test methods for the release of harmful substances (see 6.4), the standby
power (see 6.5), the cumulate clean mass (see 6.7, Annex D and Annex E), the
noise (see 6.9) and the removal of microbes (see 6.10);
— Add the contents of “6.11 Cleaning performance test of air duct cleaning device” and
Annex H;
— Respectively list the test method for the clean air delivery rate of different target
pollutants into Annex B (Particulates) and Annex C (Gaseous Pollutants); and revise
the test methods for the gaseous pollutants (Annex C);
— Supplement the contents of “7.2 Factory inspection” and “7.3 Type test” in Chapter
7 “Inspection Rules”;
— Divide “8.1 Marks” into two parts in Chapter 8, namely, “general marks” and
“performance characteristic marks”; and put forward the more specific requirements
for the contents involved in the instructions for use for the air cleaner;
— Add the contents of “Annex F Calculation method for effective room size”;
— Add the contents of “Annex G Conversion methods for cumulate clean mass and
cleaning life span”.
Please note that some contents of this document may involve patents. The issuing
organization of this document does not undertake the responsibility of identifying these
patents.
This Standard was proposed by China National Light Industry Council.
This Standard shall be under the jurisdiction of National Technical Committee of
Household Electrical Appliances Standardization (SAC/TC 46).
Drafting organizations of this Standard. China Household Electric Appliance Research
Institute, Tsinghua University, China Disease Control and Prevention Center, Beijing Yadu
Environmental Protection Technology Co., Ltd., Shanghai Institute of Measurement and
Testing Technology, Guangzhou Testing Center of Industrial Microbiology, Suzhou Beiang
Technology Co., Ltd., Apollo Environmental Protection Equipment Co., Ltd. located in
Shunde District, Foshan City, Philips (China) Investment Co., Ltd., Dongguan Uniclear
New-Material Co., Ltd., Guangdong Midea Refrigeration Equipment Co., Ltd., Daikin Air
Conditioning (Shanghai) Co., Ltd., Broad Air Conditioning Technology Co., Ltd., Lexy
Electrical Co., Ltd., Qingdao Haier Air Conditioner Co., Ltd., Panasonic Ecology Systems
Guangdong Co., Ltd., Shanghai Sengie Air Cleaning Equipment Co., Ltd., Zhuhai Gree
Electric Appliances Co., Ltd., Zhejiang Shaoxing Supor Living Electric Appliances Co., Ltd.,
Foshan Jinxinghui Electric Appliances Co., Ltd., Zhongshan Weixin Environmental
Technology Co., Ltd., Shanghai Povos Electrical Engineering Co., Ltd., Amway (China)
Daily Necessities Co., Ltd., Zhejiang Yitianneng Environmental Technology Co., Ltd.,
Shandong Xuesheng Technology Co., Ltd., Xiameng MAXMAC Air Cleaning Co., Ltd. AND
Shenzhen Huiqing Technology Co., Ltd..
Main drafters of this Standard. Ma Dejun, Zhu Yan, Zhang Yinping, Lu Jianguo, Wu Yaxi,
Shen Hao, Jiang Feng, Mo Jinhan, Wang Weiran, Zhang Xiao, Zhao Shuang, Yang
Guandong, Feng Huanhuan, Wang Baozhu, Chen Ziliang, Huang Hui, Zeng Tao, Luo
Junhua, Hu Guojun, Qiu Zhaoyun, Liu Aibing, Cao Lixia, Yang Quanhui, Dai Taoguo, Zeng
Wenli, Cai Caide, Ma Wenbing, Liu Zhen, Zhou Xigang, Deng Guosong, Mai Dong and Lin
Yangxin.
The historical versions replaced by this Standard are as follows.
— GB/T 18801-2002, GB/T 18801-2008.
Air Cleaner
1 Scope
This Standard specifies air cleaner’s terms and definitions, model and naming method,
requirements, test methods, inspection rules, marks, instructions for use, package,
transportation and storage.
This Standard is applicable to the household and similar air cleaners (hereinafter referred
to as “cleaner”).
This Standard is applicable to but not limited to the cleaners with the following operating
principles. filter, absorption, complex, chemical catalytic, photocatalytic, electrostatic,
plasma, composite, etc.
Note 1. Composite cleaner refers to the cleaners that adopt two or more cleaning principles and are
capable of removing one or more air pollutants.
Note 2. For household electric appliances - such as air conditioners, dehumidifiers, fresh air units - that
have function of air cleaning, the evaluation of the air cleaning function may reference to the relevant
content in this Standard.
The following products may be implemented by reference to this Standard.
— Small portable cleaners, air cleaners for passenger vehicles;
— Air duct cleaning devices and other similar cleaners.
This Standard is not applicable to.
— Air cleaners that are specially designed for industrial purposes;
— Air cleaners that are used in the special environments with corrosive and explosive
gases;
— Air cleaners that are specially designed for medial purposes.
2 Normative References
The following documents are indispensable for application of this document. For the dated
documents so quoted, only the dated versions apply to this document. For the undated
documents so quoted, the latest versions (including all modification sheets) apply to this
document.
GB/T191 Packaging - Pictorial marking for handling of goods
5.1 Release of harmful substances
The release of harmful sub...
......
 
(Above excerpt was released on 2014-10-21, modified on 2022-01-02, translated/reviewed by: Wayne Zheng et al.)
Source: https://www.chinesestandard.net/PDF.aspx/GBT18801-2015