GB/T 12265-2021 PDF English
US$185.00 · In stock · Download in 9 secondsGB/T 12265-2021: Safety of machinery - Minimum gaps to avoid crushing of parts of the human body Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 12265: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 12265-2021 | English | 185 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
| Valid |
| GB 12265.1-1997 | English | 479 |
Add to Cart
|
4 days
|
Safety of machinery--Safety distances to prevent danger zones being reached by the uppar limbs
| Obsolete |
| GB 12265-1990 | English | RFQ |
ASK
|
3 days
|
Safe distances between operator and hazardous positions of machinery
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 12265-2021
GB/T 12265-2021: Safety of machinery - Minimum gaps to avoid crushing of parts of the human body---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT12265-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.110
CCS J 09
GB/T 12265-2021 / ISO 13854:2017
Replacing GB/T 12265.3-1997
Safety of machinery - Minimum gaps to avoid
crushing of parts of the human body
(ISO 13854:2017, IDT)
ISSUED ON: MAY 21, 2021
IMPLEMENTED ON: DECEMBER 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 7
2 Normative references ... 7
3 Terms and definitions ... 7
4 Minimum gaps ... 8
4.1 Methodology for the use of this document ... 8
4.2 Minimum gap values ... 10
Annex A (Informative) Illustration of crushing zones ... 13
Safety of machinery - Minimum gaps to avoid
crushing of parts of the human body
1 Scope
This document specifies minimum gaps relative to parts of the human body.
This document enables the user (e.g. standard makers, designers of machinery)
to avoid hazards from crushing zones. And adequate safety can be achieved.
This document is applicable to risks from crushing hazards only.
This document is not applicable to other possible hazards, e.g. impact, shearing,
drawing-in.
Note: For impact, shearing, drawing-in hazards, additional or other measures are to be
taken.
2 Normative references
The contents of the following documents, through normative references in this
text, constitute indispensable provisions of this document. Among them, for
dated references, only the edition corresponding to that date applies to this
document. For undated references, the latest edition (including all amendments)
applies to this document.
ISO 12100:2010 Safety of machinery - General principles for design - Risk
assessment and risk reduction
ISO 13857 Safety of machinery - Safety distances to prevent hazard zones
being reached by upper and lower limbs
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 12100,
ISO 13857 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at
the following addresses:
- ISO Online browsing platform: http://www.iso.org/obp;
- IEC Electropedia: http://www.electropedia.org/.
3.1
Crushing zone
Zone in which the human body or parts of the human body are exposed to a
crushing hazard.
Note: This hazard will be generated if
- two movable parts are moving towards one another, or
- one movable part is moving towards a fixed part.
See also Annex A.
4 Minimum gaps
4.1 Methodology for the use of this document
The method of using this document shall form part of the iterative safety
strategy outlined in ISO 12100:2010, Clause 4.
The user of this document shall
a) identify the crushing hazards,
b) assess the risks from these hazards in accordance with ISO 12100, paying
particular attention to the following:
- where it is foreseeable that the risk from a crushing hazard involves
different parts of the body, the minimum gap in Table 1 relating to the
largest of these parts shall be applied [see also d)];
- the unpredictable behaviour of children and their body dimensions if
children are included in the population at risk;
- whether parts of the body can enter the crushing zone in a configuration
other than those indicated in Table 1;
- whether thick or bulky clothing (e.g. protective clothing for extreme
temperatures) or tools have to be taken into account;
- whether machinery will be used by persons wearing thick soled footwear
(e.g. clogs), which will increase the effective dimension of the foot;
c) select from Table 1 the appropriate minimum gap relating to the body part
at risk (see also Annex A), and
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 12265-2021 be delivered?Answer: The full copy PDF of English version of GB/T 12265-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 12265-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12265-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 12265-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 12265-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12265-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 12265-2021?A step-by-step guide to download PDF of GB/T 12265-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 12265-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|