GB 38262-2019 PDF English
US$105.00 · In stock · Download in 9 secondsGB 38262-2019: Flammability of Interior Materials for Buses Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 38262-2019 | English | 105 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Flammability of Interior Materials for Buses
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 38262-2019
GB 38262-2019: Flammability of Interior Materials for Buses---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB38262-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.220.40
T 09
Flammability of Interior Materials for Buses
Issued on. OCTOBER 14, 2019
Implemented on. JULY 1, 2020
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative References... 4
3 Terms and Definitions... 5
4 Technical Requirements... 6
5 Test Methods... 8
6 Implementation Date... 9
Appendix A (Normative) Sampling Requirements for Test Samples... 10
Foreword
All the technical content in this Standard is mandatory.
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
This Standard was proposed by and shall be under the jurisdiction of Ministry of
Industry and Information Technology of People’s Republic of China.
The drafting organizations of this Standard. Technical Center of China FAW Group
Corporation; China Highway & transportation Society, Bus Branch; Sichuan Research
Institute of Ministry of Public Security; National Bus Quality Supervision and Inspection
Center; Zhengzhou YUTONG Group Co., Ltd.; Institute of Flame Retardant of China;
Xiamen Golden Dragon Co., Ltd.; Brilliance Auto Group; Jinhua YOUNG MAN
Automobile Group; FOTON Motor Group; Zhong Tong Bus Holding Co., Ltd.; Xiamen
King Long United Automotive Industry Co., Ltd.; King Long United Automotive Industry
(Suzhou) Co., Ltd.; Changchunshi HOSLY Apply Technique Graduate School; Tianjin
Fire Research Institute of the Ministry of Public Security; National Automobile Quality
Supervision and Test Center (Xiangyang); Zhejiang HIGHTEX Fabric Co., Ltd.;
Hangzhou XIANGJUN Textile Flame Retardant Technology Co., Ltd.; Jiangsu
CHANGDA Environmental Protection Technology Co., Ltd.; Tianjin Fu-Automotive
Components Co., Ltd.; WANHUA Energy Conservation Technology Group Co., Ltd.;
Armacell Thermal Insulation Materials (Guangzhou) Co., Ltd.; Anhui KINGSEN
Automobile Decoration & Design Co., Ltd.; Danyang Vehicle and Vessel Decoration
Co., Ltd.; China Automotive Engineering Research Institute Co., Ltd.; China Highway
Vehicle & Machinery Co., Ltd.; Puyang GREENCOS New Material Technology Co.,
Ltd.; Fujian HUAYANG Microfiber Co., Ltd.
The main drafters of this Standard. Li Jinghua, Changhong, Yang Zhaoguo, Hu Xuanru,
Lvwei, Xie Letao, Chenjie, Diaowei, Wu Zhenguo, Zhou Zhengmao, Lin Jianlong, Lizhi,
Yu Qikui, Liang Zhengbao, Liu Xianwu, Lan Qiyong, Liu Qinghua, Jiang Jianhua,
Zhangzhe.
Flammability of Interior Materials for Buses
1 Scope
This Standard stipulates the terms and definitions, technical requirements, test
methods and the requirements of implementation date of flammability of interior
materials for buses.
This Standard is applicable to the assessment of flammability of interior materials for
Type-M2 and Type-M3 buses.
This Standard does not include electrical devices (various electric appliance modules,
such as air conditioning assembly control switch, wiring harness, electric appliance
control panel, navigator, radio, DVD module and driving combination meter), lamps,
airbags (curtains), bathroom accessories (such as toilet, washbasin and water tank)
and laminboard whose external layer is metallic material and internal layer is non-
metallic material.
2 Normative References
The following documents are indispensable to the application of this document. In
terms of references with a specified date, only versions with a specified date are
applicable to this document. In terms of references without a specified date, the latest
version (including all the modifications) is applicable to this document.
GB/T 2406.2-2009 Plastics - Determination of Burning Behavior by Oxygen Index -
Part 2.Ambient-temperature Test (ISO 4589-2.1996, IDT);
GB/T 2918 Plastics - Standard Atmospheres for Conditioning and Testing;
GB/T 5454 Textiles - Burning Behavior - Oxygen Index Method (GB/T 5454-1997, neq
ISO 4589.1984);
GB 8410 Flammability of Automotive Interior Materials;
3 Terms and Definitions
The following terms and definitions are applicable to this document.
3.1 Bus
Bus refers to passenger-carrying vehicle whose seating capacity exceeds 9 seats,
including the driver’s seat.
3.2 Horizontal Burning
Fixate sample on a horizontal fixture; expose one end in the stipulated test flame.
Through the determination of the burning speed, evaluate the sample’s horizontal
burning behavior.
3.5 Density of Smoke
Density of smoke refers to the measurement of material’s smoke amount under the
stipulated test conditions. It shall be expressed in light intensity attenuation through
smoke.
4 Technical Requirements
4.1 Classification of Materials
Interior materials for buses shall be classified in accordance with applied materials,
included components and application areas, as it is shown in Table 1.
4.2 Technical Requirements
4.2.1 General requirements
Interior materials that satisfy the requirements of this Standard shall be deemed as
satisfactory with the requirements in GB 8410.
4.2.4 Other instructions
5 Test Methods
5.1 Conditioning
Before tests, samples shall be placed for over 24 h in accordance with the stipulations
in GB/T 2918, and under the conditions of standard ambient temperature (23 ± 2) °C,
relative humidity (50 ± 5) %.
5.5 Oxygen Index
5.6 Density of Smoke
The test of density of smoke shall be conducted in accordance with the stipulations in
GB/T 8627.The test result shall be determined in accordance with the grade of smoke
density.
5.7 Grade of Flammability
6 Implementation Date
In terms of vehicle models with newly applied type approval, this Standard shall be
implemented since the date of implementation.
Appendix A
(Normative)
Sampling Requirements for Test Samples
A.1 Preparation of test samples
Avoid cavities, directly cut test samples from components. If the components cannot
be cut into sample strips stipulated in this Standard, then, raw materials of the
components may be adopted to make sample strips that comply with the stipulations
in accordance with the same production process of the components.
A.2 Requirements of thickness
When components’ actual thickness is less than the standard thickness recommended
in Table A.1, the thickness of test sample shall be the actual thickness of the
components.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 38262-2019 be delivered?Answer: The full copy PDF of English version of GB 38262-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 38262-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB 38262-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 38262-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB 38262-2019?A step-by-step guide to download PDF of GB 38262-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 38262-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|