CNCA C11-13-2014 PDF in English
CNCA C11-13-2014 (CNCAC11-13-2014) PDF English
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| CNCA C11-13-2014 | English | 155 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
China Compulsory Certification Implementation Rules - Vehicle-body reflective logo
| |
Standards related to (historical): CNCA C11-13-2014
PDF Preview
CNCA C11-13-2014: PDF in English CNCA-C11-13.2014
CNCA / CCC
Serial No.. CNCA-C11-13.2014
CNCA-C11-13-2014
China Compulsory Certification Implementation Rules -
Retro-reflective markings of carriage
ISSUED ON. AUGUST 21, 2014
IMPLEMENTED ON. JANUARY 01, 2015
Issued by. Certification and Accreditation Administration of the People's
Republic of China
He is now the Sales Manager (Founder and Managing Director) at
expertise and hands-on working experiences, through his then-employment as
“China Certification Program Manager” at BlackBerry Beijing, and “Product
Safety & Compliance (PS&C) Manager” at Motorola Singapore.
- CNCA / China Compulsory Certification (CCC) regulations.
- Hands-on program experience with regulator CNCA for CCC mark’s
compliance, approval and management.
- Was an authorized representative by then-employer BlackBerry (RIM)
to liaise with Chinese regulators, authorities, certification bodies and
designated laboratories – including CNCA, CQC, Beijing
Communication Authority, Beijing Administration of Quality Supervision
Inspection and Quarantine.
- Hands-on program experience with certification body CQC for
“certification entrusting”, type test, initial factory audit, regular / annual
factory audit (i.e. the “after-certification supervision” in this Rules).
- Manage, plan, guide and site-visit the global factories / suppliers’ global
factories (i.e. the “manufacturing enterprises” in this Rules) in North
America, Europe and China for CQC initial factory audit and regular
annual factory audit (after-certification supervision).
- ISO Process Auditor, certified by Motorola USA & Motorola Singapore
- PMP, certified by Project Management Institute USA.
Lead time to deliver. < 2 hours in office time; < 10 hours in off-office time.
Table of Contents
0 Introduction ... 4
1 Application scope ... 4
2 Certification standards ... 4
3 Certification modes ... 5
4 Classification of certification units ... 5
5 Certification entrusting ... 5
6 Certification implementation ... 6
7 After-certification supervision ... 8
8 Certificate ... 10
9 Certification marks ... 11
10 Charges ... 12
11 Certification responsibility ... 12
12 Certification implementation detailed-rules ... 12
Attachment 1. Classification of compulsory certification-units of retro-reflective
markings of carriage ... 14
Attachment 2. Standards and test items of compulsory certification of
retro-reflective markings of carriage ... 15
0 Introduction
This Rules is established based on the security risk and certification risk of
retro-reflective markings of carriage. It stipulates the basic principles and
requirements for the implementation of China Compulsory Certification for
retro-reflective markings of carriage.
This Rules can be used with other general rules issued by Certification and
Accreditation Administration (CNCA), such as “China Compulsory Certification
Implementation Rules - Manufacturing Enterprise Classification Management,
Certification Mode Selection and Determination”, “China Compulsory Certification
Implementation Rules - Utilization of Manufacturing Enterprise Testing Resource and
Other Certification Results”, “China Compulsory Certification Implementation Rules -
Factory Inspection General Requirements”.
The certification body shall make principles for certification according to the general
implementation rules and this Rules and implement them accordingly.
Manufacturing enterprise shall ensure that their certified products are capable of
sustaining the compliance with the certification and are compatible with the
requirements of the standards.
1 Application scope
This Rules applies to retro-reflective markings of carriage which are installed on and
used by semi-trailer tractor, truck, special-operation vehicles of truck-chassis refitting,
trailer, etc., as specified in GB 7258 “Safety specifications for power-driven vehicles
operating on roads”.
Due to the changes in the law, regulations or related product standards, technology,
industry policies and other causes which may change the applicable scope, the
announcement released by CNCA shall be final and conclusive.
2 Certification standards
Standards for certification are shown in Attachment 2 “Standards and test items of
compulsory certification of retro-reflective markings of carriage”.
In principle, the latest versions of above standards that are issued by the National
Standardization Administration shall be executed. When other versions are required to
use, then it shall be executed according to the applicable relevant standards issued by
the State Certification and Accreditation Administration (CNCA).
3 Certification modes
The basic certification mode of implementing the China Compulsory Certification for
retro-reflective markings of carriage is.
Type test + initial factory inspection + after-certification follow-up supervision;
The certification body shall follow the requirements of “China Compulsory Certification
Implementation Rules - Manufacturing Enterprise Classification Management,
Certification Mode Selection and Determination” to carry out the classification
management to manufacturing enterprise; consider the results of classification
management; on the basis of basic certification mode, appropriately increase the
combination of supervision mode after certification, so as to determine the certification
mode that is applicable to certification client. [TRNASLATOR NOTE is not part of this
Rules. Translator note. “certification client”, the counterpart of certification body, refers
to the Applicant / Manufacturer or its proxy (Power of Attorney). For ease of reading,
hereinafter abbreviated as “CLIENT”].
4 Classification of certification units
In principle, products are certificated according to product model. Products with same
design-model but different sales models (for example. the differences among different
models are only specific to different clients or sales territories) can be certified as one
certification-unit.
Products that are of different-producers or different-manufacturing enterprises can not
be classified as one certification-unit; the test results can not be covered or quoted by
each other.
Classification of certification units is shown in “Classification of compulsory
certification-units of retro-reflective markings of carriage” (Attachment 1).
5 Certification entrusting
5.1 Application and acceptance of certification entrusting
CLIENT must put forward the certification entrusting to the certification body, in an
appropriate way. Certification body shall process the certification entrusting; and
feedback the acceptance or rejection according to the time limit in the certification
implementation rules.
When it does not comply with national laws and regulations AND relevant industry
policies, the certification body must not accept the certification entrusting.
according to the methods specified by manufacturer, the mark shall be clearly visible.
10 Charges
Certification body and laboratory shall base on the national provisions of China
Compulsory Certification fees to charge the fees.
Certification body shall, based on the initial factory inspection fees, after-certification
supervision re-inspection man-day fees in national provisions of China Compulsory
Certification fees, reasonably determine the specific man-day fees.
11 Certification responsibility
Certification body shall be responsible for the certification results.
Laboratory shall be responsible for the test results and test reports.
Certification body and its inspectors shall be responsible for the factory inspection
conclusion.
CLIENT shall be responsible for the submitted materials, and samples’ authenticity
and legality.
12 Certification implementation detailed‐rules
Certification body shall formulate scientific, reasonable and feasible certification
implementation detailed-rules, according to the principle and requirements of this
Rules. Certification implementation detailed-rules shall be publicly announced, after
filed to CNCA. Certification implementation detailed-rules shall at least include the
following contents.
(1) Certification procedure and time limits;
(2) Certification mode and relevant requirements;
(3) Classification management requirements of manufacturing enterprise;
(4) Certification entrusting materials and relevant requirements;
(5) Requirements for sample test;
(6) Requireme...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|