|
Std ID |
Description (Standard Title) |
|
YD/T 6309-2024
|
(Quantum Key Distribution (QKD) Network - Safety Technical Requirements)
|
|
YD/T 1115.1-2023
|
(Water-blocking materials for communication cables and optical cables - Part 1: Water-blocking tapes)
|
|
YD/T 1115.2-2023
|
(Water-blocking materials for communication cables and optical cables - Part 2: Water-blocking yarns)
|
|
YD/T 4013.6-2023
|
(Metro N×25Gbit/s Wavelength Division Multiplexing (WDM) System Technical Requirements - Part 6: Southbound Interface)
|
|
YD/T 4197-2023
|
(Metro access type wavelength division multiplexing (WDM) system test method)
|
|
YD/T 4209-2023
|
(Smart home terminal security Smart TV security capability technical requirements and test methods)
|
|
YD/T 4298-2023
|
(Open and decoupled wavelength division multiplexing (WDM) system technical requirements)
|
|
YD/T 4299-2023
|
(Interface Requirements Between Controller Layers of Software-Defined Optical Transport Network (SDOTN) Based on Traffic Engineering Abstraction and Control of Networks (ACTN))
|
|
YD/T 4301-2023
|
(Quantum secure communication network architecture)
|
|
YD/T 4302.1-2023
|
(Quantum Key Distribution (QKD) Network Management Technical Requirements - Part 1: Network Management System (NMS) Functions)
|
|
YD/T 4305.1-2023
|
(Hybrid optoelectronic connectors for communication - Part 1: Type SC)
|
|
YD/T 1460.5-2023
|
(Air-blown micro optical cables and optical fiber units for communications - Part 5: Optical fiber units)
|
|
YD/T 1485-2023
|
(Polyethylene material for communication optical cable sheath)
|
|
YD/T 2289.1-2023
|
(Cables for radio frequency remote units - Part 1: Optical cables)
|
|
YD/T 2340-2023
|
(Passive dispersion compensation module based on dispersion compensation fiber)
|
|
YD/T 2488.2-2023
|
(Flexible steel tube armored optical cables - Part 2: Butterfly optical cables)
|
|
YD/T 2759.4-2023
|
(Single-fiber bidirectional optical transceiver module - Part 4: 100Gb/s)
|
|
YD/T 2799.5-2023
|
(Technical conditions for integrated coherent optical receivers - Part 5: 800Gb/s)
|
|
YD/T 3358.4-2023
|
(Dual-channel optical transceiver module - Part 4: 2×100Gb/s)
|
|
YD/T 3538.4-2023
|
(400Gb/s intensity modulation pluggable optical transceiver module - Part 4: 2×200Gb/s)
|
|
YD/T 3714.2-2023
|
(Optical cable online monitoring OTDR module - Part 2: For PON system)
|
|
YD/T 3834.2-2023
|
(Quantum Key Distribution (QKD) System Technical Requirements - Part 2: QKD System Based on Gaussian Modulated Coherent State Protocol)
|
|
YD/T 4020.4-2023
|
(Single-fiber bidirectional wavelength division multiplexer for metropolitan area access - Part 4: MWDM)
|
|
YD/T 4370-2023
|
(C-band extended optical wavelength division multiplexing (WDM) system technical requirements)
|
|
YD/T 4372-2023
|
(Sliced Packet Network (SPN) southbound interface technical requirements)
|
|
YD/T 4374-2023
|
(Software-defined synchronization network testing method)
|
|
YD/T 4375.1-2023
|
(Intelligent optical distribution network access control test method - Part 1: Access control management terminal and application)
|
|
YD/T 4375.2-2023
|
(Intelligent optical distribution network access control test method - Part 2: NB-IoT based door lock)
|
|
YD/T 4375.3-2023
|
(Intelligent optical distribution network access control test method - Part 3: Access control management system)
|
|
YD/T 4377.1-2023
|
(Optical transceiver integrated module software management interface - Part 1: SFP/SFP+/SFP28)
|
|
YD/T 4379-2023
|
(Optical fiber life prediction model)
|
|
YD/T 4443-2023
|
(Industrial Internet networking technologies Passive optical network (PON) equipment technical requirements)
|
|
YD/T 4445-2023
|
(Enhanced Reference Master Time (ePRTC) Equipment Technical Requirements)
|
|
YD/T 4446-2023
|
(Sliced Packet Network (SPN) device testing methods)
|
|
YD/T 760-2023
|
(Polyolefin insulation materials for communication cables)
|
|
YD/T 1439-2023
|
(Router equipment security testing method Core router (based on IPv4))
|
|
YD/T 2488.1-2023
|
(Flexible steel tube armored optical cables - Part 1: Circular optical cables)
|
|
YD/T 2796.6-2023
|
(Parallel transmission active optical cable optical module - Part 6: 800Gb/s AOC)
|
|
YD/T 3125.1-2023
|
(Enhanced SFP optical transceiver module for communications (SFP+) - Part 1: 8.5Gbit/s and 10Gbit/s)
|
|
YD/T 3328-2023
|
(Uplink and downlink rate configuration requirements for public fixed broadband access services)
|
|
YD/T 3835.2-2023
|
(Quantum Key Distribution (QKD) System Test Method - Part 2: QKD System Based on Gaussian Modulated Coherent State Protocol)
|
|
YD/T 4020.2-2023
|
(Single-fiber bidirectional wavelength division multiplexer for metropolitan area access - Part 2: CWDM)
|
|
YD/T 4498-2023
|
(Industrial Internet networking technologies Passive optical network (PON) network testing methods)
|
|
YD/T 4504-2023
|
(Ultra-high precision time synchronization interface requirements)
|
|
YD/T 4506-2023
|
(Technical requirements for access optical transport network (OTN) equipment management and control)
|
|
YD/T 4555-2023
|
(TD-LTE digital cellular mobile communication network home base station gateway equipment testing method)
|
|
YD/T 4609-2023
|
(Slice Packet Network (SPN) Southbound Interface Test Method)
|
|
YD/T 4610-2023
|
(Sliced Packet Network (SPN) fine-grained bearer technical requirements)
|
|
YD/T 4611-2023
|
(Overall technical requirements for software-defined optical network (SDON) management and control system (MCS))
|
|
YD/T 4612-2023
|
(Technical requirements for time difference return transmission based on satellite and PTP synchronization)
|
|
YD/T 4618-2023
|
(Technical requirements and test methods for optical fiber fusion splicers for communication optical cable lines)
|
|
YD/T 4632-2023
|
(Quantum key distribution and classical optical communication co-fiber transmission technical requirements)
|
|
YD/T 1181.7-2022
|
(Characteristics of non-metallic strength members for optical cables - Part 7: Fiber-reinforced plastic flexible rods)
|
|
YD/T 1954-2022
|
(Bending loss insensitive single mode fiber characteristics)
|
|
YD/T 1997.1-2022
|
Drop optical fibre cables for telecommunication - Part 1: Bow-type optical fibre cables
|
|
YD/T 3347.4-2022
|
(Test method for broadband customer intelligent gateway based on public telecommunication network - Part 4: Intelligent home networking equipment)
|
|
YD/T 3347.5-2022
|
(Test method for broadband customer intelligent gateway based on public telecommunication network - Part 5: Home intelligent gateway and interface of intelligent home networking equipment)
|
|
YD/T 3347.6-2022
|
(Test method for broadband customer intelligent gateway based on public telecommunication network - Part 6: Mesh networking equipment)
|
|
YD/T 3358.3-2022
|
(Dual Channel Optical Transceiver Module - Part 3: 2×50Gb/s)
|
|
YD/T 1118.4-2022
|
(Secondary coating materials for optical fibers - Part 4: Thermoplastic polyester elastomers)
|
|
YD/T 1997.4-2022
|
Drop optical fibre cables for telecommunication - Part 4: Optical and electrical hybrid cables
|
|
YD/T 2159-2022
|
(Optical hybrid cable for access network)
|
|
YD/T 3421.11-2022
|
(Broadband customer intelligent gateway based on public telecommunication network - Part 11: Intelligent gateway integrating IPTV set-top box function)
|
|
YD/T 3421.13-2022
|
(Broadband Customer Intelligent Gateway Based on Public Telecommunication Network - Part 13: Security Technical Requirements for Enterprise Intelligent Gateway Equipment)
|
|
YD/T 3692.4-2022
|
(Intelligent optical distribution network - Technical requirements for intelligent access control - Part 4: NB-IoT-based door locks)
|
|
YD/T 3692.5-2022
|
(Intelligent optical distribution network - Technical requirements for intelligent access control - Part 5: Intelligent access control management system)
|
|
YD/T 3831.2-2022
|
(Integrated Coherent Transceiver Optical Components - Part 2: 400Gb/s)
|
|
YD/T 3907.1-2022
|
(Key Components and Modules for Quantum Key Distribution (QKD) Based on BB84 Protocol - Part 1: Light Source)
|
|
YD/T 4013.3-2022
|
(Metropolitan N×25Gbit/s Wavelength Division Multiplexing (WDM) System Technical Requirements - Part 3: LWDM)
|
|
YD/T 4013.4-2022
|
(Metropolitan N×25Gbit/s Wavelength Division Multiplexing (WDM) System Technical Requirements - Part 4: MWDM)
|
|
YD/T 4172-2022
|
(Sliced Packet Network (SPN) Equipment Technical Requirements)
|
|
YD/T 629.1-2022
|
(Methods for monitoring changes in optical fiber transmission attenuation - Part 1: Transmission power method)
|
|
YD/T 629.2-2022
|
(Methods for Monitoring Changes in Optical Fiber Transmission Attenuation - Part 2: Backscatter Method)
|
|
YD/T 1020.1-2021
|
Characteristics of termite resistant jacketing materials for electrical and optical cables - Part 1: Polyamide
|
|
YD/T 1181.2-2021
|
Characteristics of non-metal reinforcement for optical fiber cables - Part 2: Aramid yarns
|
|
YD/T 1999-2021
|
Lightweight self-supporting optical fibre cables for outdoor application for telecommunication
|
|
YD/T 2339.1-2021
|
Accessories for installation of radio-frequency coaxial cable - Part 1: Feeder clamps
|
|
YD/T 2799.4-2021
|
Technical specification of integrated intradyne coherent receiver - Part 4: 400Gb/s
|
|
YD/T 2896.6-2021
|
Intelligent optical distribution network interface requirements - Part 6: Interface between intelligent management APP and intelligent portable tool
|
|
YD/T 3125.3-2021
|
Enhanced SFP transceiver(SFP+) used in communication - Part 3: Tunable 10Gbit/s
|
|
YD/T 3132.4-2021
|
Components and materials for fiber-to-the-home installation - Part 4: Components for aerial installation
|
|
YD/T 3826-2021
|
(Global Network Word of Mouth (SPN) vision technical requirements)
|
|
YD/T 3828-2021
|
(Technical requirements for software-defined optical transport network (SDOTN) network service interface based on traffic engineering network abstraction and control (ACTN))
|
|
YD/T 3830.1-2021
|
(200Gb/s phase change light speed all-in-one module - Part 1: DP-QPSK)
|
|
YD/T 3830.2-2021
|
(200Gb/s Phase Change Light Speed All-in-One Module - Part 2: DP-8QAM)
|
|
YD/T 3830.3-2021
|
(200Gb/s phase change optical propagation integrated module - Part 3: DP-16QAM)
|
|
YD/T 3831.1-2021
|
(Integrated coherent receiving and luminous components - Part 1: 100Gb/s)
|
|
YD/T 3832-2021
|
(Flame-retardant polyethylene materials for communication cables and optical cables)
|
|
YD/T 3833-2021
|
(Photoelectric hybrid cable for wireless communication small base station)
|
|
YD/T 3834.1-2021
|
(Quantum key distribution (QKD) system technical requirements - Part 1: QKD system based on decoy state BB84 protocol)
|
|
YD/T 3835.1-2021
|
(Quantum key distribution (QKD) system test method - Part 1: QKD system based on decoy state BB84 protocol)
|
|
YD/T 3841-2021
|
(PRTC equipment technical requirements)
|
|
YD/T 3842-2021
|
(Software-defined packet transmission network testing method)
|
|
YD/T 3843-2021
|
(Technical requirements for access optical transport network (OTN) equipment)
|
|
YD/T 1688.10-2021
|
Technical specification of optical transceiver module for xPON - Part 10: Optical transceiver module for integrating GPON and XGS-PON OLT optical transceiver module for integrating GPON and xGS-PON OLT
|
|
YD/T 2484-2021
|
Technical requirements of packet enhanced Optical Transport Network (OTN) equipment
|
|
YD/T 3287.22-2021
|
Test methods for interfaces in intelligent optical distribution network - Part 22: Interface based on socket between network infrastructure and intelligent ODN management system
|
|
YD/T 3421.10-2021
|
(Broadband customer intelligent gateway based on public telecommunication network - Part 10: Technical requirements for wireless mesh networking)
|
|
YD/T 3907.3-2021
|
(Key Components and Modules for Quantum Key Distribution (QKD) Based on BB84 Protocol - Part 3: Quantum Random Number Generator (QRNG))
|
|
YD/T 2759.3-2021
|
(Single fiber first optical transceiver module 3 parts: 50Gb/s)
|