GB/T 19183.1-2024 English PDFUS$274.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 19183.1-2024: Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines Status: Valid GB/T 19183.1: Historical versions
Basic dataStandard ID: GB/T 19183.1-2024 (GB/T19183.1-2024)Description (Translated English): Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K05 Classification of International Standard: 31.240 Word Count Estimation: 14,157 Date of Issue: 2024-12-31 Date of Implementation: 2025-07-01 Older Standard (superseded by this standard): GB/T 19183.1-2003 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 19183.1-2024: Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 31.240 CCSK05 National Standard of the People's Republic of China Replaces GB/T 19183.1-2003 Mechanical structures for electrical and electronic equipment Outdoor enclosures Part 1.Design guidelines Outdoorenclosures-Part 1.Designguidelines (IEC 61969-1.2023, IDT) Released on 2024-12-31 2025-07-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 4 4 Coordinated dimensions 5 5 Environmental requirements, testing and safety requirements 5 5.1 Classification of environmental conditions 5 5.2 Mechanical loads related to transport and installation 7 5.3 Operation-related mechanical loads 7 5.4 Static load capacity 7 5.5 Earthquake resistance 7 6 Electromagnetic Shielding 7 7 Thermal management and noise emissions 7 References 8 Figure 1 Typical outdoor enclosure 1 Figure 2 Installation location of outdoor enclosure 4 Table 1 Working and transportation conditions 5 Table 2 Safety requirements 6ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 1 of GB/T 19183 "Outdoor enclosures for mechanical structures of electrical and electronic equipment". GB/T 19183 has been published. The following parts are published. --- Part 1.Design guidelines; --- Part 2.Coordination dimensions; --- Part 3.Environmental requirements, test and safety requirements. This document replaces GB/T 19183.1-2003 "Electronic equipment mechanical structure outdoor enclosure Part 1.Design guidelines" and Compared with GB/T 19183.1-2003, in addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Deleted the chapter "Application Places" (see Chapter 4 of the.2003 edition); ---Change "climate, mechanical tests and safety requirements" to "environmental requirements, tests and safety requirements", and make corrections to the clauses and their corresponding requirements. has been redefined (see Chapter 5, Chapter 6 of the.2003 edition); --- Changed "environmental conditions" to "working and transportation conditions", and detailed the relevant conditions and test requirements (see Table 1,.2003 Table 1 of the version); --- Added "chemically active substances", "thermal management and heat transfer rate k", "resistance to mechanical stress" and "coating", and deleted "corrosive gases" "Corrosive liquids" and "corrosion resistance" (see Table 1, Table 1 of the.2003 edition); --- The relevant requirements and test specifications of "safety requirements" have been refined (see Table 2, Table 2 of the.2003 edition); --- Added "Lifting and Rigidity", "Malicious Damage" and "Flammability", and deleted "Mechanical Safety Requirements" and "Coating" (see Table 2,.2003 Table 2 of the.2010 edition); --- Changed "thermal performance" to "thermal management", refined the relevant provisions, and added the requirements for "noise emission" (see Chapter 7,.2003 8 of the.2011 edition). This document is equivalent to IEC 61969-1.2023 "Mechanical structures for outdoor enclosures of electrical and electronic equipment Part 1.Design guidelines". Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed and coordinated by the National Technical Committee for Comprehensive Standardization of Electrical and Electronic Equipment Structures (SAC/TC34). This document was drafted by. Beijing Sifang Relay Protection Engineering Technology Co., Ltd., Beijing Institute of Electrical Engineering and Economics of Machinery Industry, Xiamen Yesheng Electric Co., Ltd., the 36th Institute of China Electronics Technology Group Corporation, Beijing Sifang Relay Protection Automation Co., Ltd., Nanjing NARI Jibao Electric Co., Ltd., FiberHome Technologies Co., Ltd., ZTE Corporation, and Guodian Nanjing Automation Co., Ltd. Co., Ltd., Nanyang Electric Group Co., Ltd., Mojun Electric Co., Ltd., Shenzhen Ruiyang Chuangke Technology Co., Ltd., China Quality Certification Center Co., Ltd., Yunda Energy Technology Group Co., Ltd., and Shengzhongyi Electric Power Technology Co., Ltd. The main drafters of this document are. Gao Feng, Li Jianxia, Guo Yan, Ye Qinci, Jin Dayuan, Han Zaolin, Yu Haibo, Cui Yu, Wang Wei, Yu Chunlin, Li Zhengqing, Mu Linsen, Tang Jianqiang, Li Enlin, Wang Huiling, Meng Wei, Wang Gang, Xiang Feng, and Pan Qi. The previous versions of this document and the documents it replaces are as follows. ---First published in.2003 as GB/T 19183.1-2003; ---This is the first revision.IntroductionGB/T 19183 "Outdoor enclosures for mechanical structures of electrical and electronic equipment" is for outdoor electrical and electronic equipment used in places without weather protection. It is designed for electronic equipment casing and is intended to consist of three parts. --- Part 1.Design guidelines. The purpose is to provide a general outline of the requirements for the use of enclosures in outdoor non-weather-protected locations. specification. --- Part 2.Coordinated dimensions. The purpose is to ensure that the external dimensions of the outdoor enclosure are coordinated by specifying the internal and external dimensions of the outdoor enclosure. and consistency of internal connection dimensions. --- Part 3.Environmental requirements, tests and safety requirements. The purpose is to meet the storage, The requirements for transportation and final installation conditions establish the basic environmental performance standards for outdoor enclosure compliance. With the continuous development of electrical and electronic equipment, outdoor enclosures are increasingly used. The general guidelines developed in other parts of the Outdoor Enclosures series provide more complete design guidance for outdoor enclosures and accelerate their in-depth develop. Mechanical structures for electrical and electronic equipment Outdoor enclosures Part 1.Design guidelines1 ScopeThis document contains guidelines for the design of outdoor enclosures for electrical and electronic equipment and is applicable to a wide range of mechanical, electromechanical, and electrical installations using modular design. Sub-device. The purpose of this document is to. --- Provides a general specification focusing on outdoor application requirements for enclosures used in fixed locations without weather protection; ---Achieve product integrity in outdoor conditions and simplify product selection for outdoor enclosures from different suppliers. These enclosures can house any equipment and protect equipment installed outdoors from harmful environmental influences. The equipment installed can be but Not limited to subracks or enclosures that comply with IEC 60917 series or IEC 60297 series. A typical outdoor enclosure is shown in Figure 1. Figure 1 Typical outdoor enclosure2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19183.1-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 19183.1-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 19183.1-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19183.1-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 19183.1-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19183.1-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
