|
Std ID |
Description (Standard Title) |
|
YD/T 2402.2-2012
|
Technical requirements for access network 10-Gigabit-capable passive optical networks (XG-PON). Part 2: Physical media dependent (PMD) layer requirements
|
|
YD/T 2402.3-2012
|
Technical requirements for access network 10-Gigabit-cpable passive optical networks (XG-PON). Part 3: XGTC layer requirements
|
|
YD/T 640-2012
|
General requirements and test methods for radio-frequency connectors of telecommunication equipment
|
|
YD/T 1949.4-2011
|
Technical requirements for access network – Gigabit-capable passive optical network(GPON). Part4: ONT management and control interface requirements
|
|
YD/T 2274-2011
|
Technical requirements for access network. 10Gbit/s Ethernet passive optical network (10G-EPON)
|
|
YD/T 2275-2011
|
Technical requirements for access network. Subscriber access loop (port) identification in broadband access networks
|
|
YD/T 2276-2011
|
Technical requirements for access network EPON/GPON systems bearing TDM service
|
|
YD/T 2277-2011
|
Technical requirements for access network. PON optical line test and diagnostics
|
|
YD/T 2282-2011
|
Technical requirements for symmetrical cables at and below 3GHz used in telecommunication equipment
|
|
YD/T 2285-2011
|
Protection closure for coaxial cable joints and earthing
|
|
YD/T 2320-2011
|
Copper clad aluminum power wires for communications
|
|
YD/T 2337-2011
|
Photovoltaic cables for electric powers in communication system
|
|
YD/T 2338-2011
|
Telecommunication cable-foamed polyethylene dielectric, copper-clad aluminum tube inner conductor, corrugated copper tube outer conductor, 50 ohm radio frequency coaxial cable, for wireless communications
|
|
YD/T 2345-2011
|
Power terminal lugs for communications
|
|
YD/T 814.5-2011
|
Closure for optical cable. Part 5: Closure for deep water submarine optical fibre cables
|
|
YD/T 1173-2010
|
Flame-retardant and fire resistant flexible cable for power supply system for telecommunications
|
|
YD/T 1949.3-2010
|
Technical requirements for access network. Gigabit-capability passive optical network (GPON). Part 3: Transmission convergence (TC) layer requirements
|
|
YD/T 1993.2-2010
|
Technical requirements for access network 2Gbit/s ethernet passive optical network (2G EPON). Part 2: Co-exist mode
|
|
YD/T 2157-2010
|
Technical requirements for access network Interoperability of GPON system
|
|
YD/T 2160.1-2010
|
Coaxial cables with insulation diameter below 1mm and cable assemblies. Part 1: Cables
|
|
YD/T 2160.2-2010
|
Coaxial cables with insulation diameter below 1mm and cable assemblies. Part 2: Cable assemblies
|
|
YD/T 2161-2010
|
Telecommunication cable. Foamed polyethylene dielectric, copper-clad aluminum tube inner conductor, corrugated aluminum tube outer conductor, 50Ω radio frequency coaxial cables for wireless communication
|
|
YD/T 2162-2010
|
Local communication cables with copper-clad aluminum wire, solid polyolefin insulate, aluminum-plastic integrated sheath
|
|
YD/T 2163-2010
|
50Ω Bundled coaxial cables for mobile communication
|
|
YD/T 1945-2009
|
Test Method of BGP/MPLS VPN
|
|
YD/T 1946-2009
|
Technical Requirements for Multicast in BGP/MPLS Based Layer3 VPN
|
|
YD/T 1949.1-2009
|
Technical requirements for access network. Gigabit-capable passive optical network(GPON). Part1: General requirements
|
|
YD/T 1949.2-2009
|
Technical requirements for access network. Gigabit-capable passive optical network(GPON). Part2: Physical media dependent(PMD)layer requirements
|
|
YD/T 1950-2009
|
Technical Requirements for Access network. ADSL Line Transceiver(ATU-C) In-band Management
|
|
YD/T 1951-2009
|
Technical Requirements for Access Network. DSL Single-Ended Line Testing System
|
|
YD/T 1953-2009
|
Technical Requirements for Access Network. Multi-service Delivery over EPON/GPON Systems
|
|
YD/T 1955-2009
|
Drop cables for xDSL systems
|
|
YD/T 1966-2009
|
50Ω Radio-Frequency Coaxial Jumpers for Mobile Communication
|
|
YD/T 1967-2009
|
50Ω Radio Frequency Coaxial connectors for Mobile communication
|
|
YD/T 1993.1-2009
|
Technical requirements for access network 2Gbit/s ethernet passive optical network (2G EPON). Part 1: Compatible mode
|
|
YD/T 1995-2009
|
Test method for access network equipment gigabit-capable passive optical network (GPON)
|
|
YD/T 2047-2009
|
Test method of security for access network equipment. XDSL CPE
|
|
YD/T 2051-2009
|
Test methods of security for access network equipment. Passive optical network (PON)
|
|
YD/T 926.1-2009
|
Telecommunication Generic Cabling System for Building. Part 1: Generic Specification
|
|
YD/T 943.1-2009
|
Radio-frequency coaxial connector. Part 1: Type T5.6 (L9)
|
|
YD/T 943.2-2009
|
Radio-frequency coaxial connector. Part 2: Type T3.8 (C4)
|
|
YD/T 943.3-2009
|
Radio-frequency coaxial connector. Part 3: Type T2.8 (C3)
|
|
YD/T 943.4-2009
|
Radio-frequency coaxial connector. Part 4: Type T5.1 (C5)
|
|
YD/T 1188-2008
|
Technical Specification for Access Network. ADSL/ADSL2+CPE
|
|
YD/T 1771-2008
|
Technical Requirements for Access Networks. Interoperability of EPON Systems
|
|
YD/T 1807-2008
|
Technical Requirements for Access Network--Point to Point Optical Ethernet Access System
|
|
YD/T 1809-2008
|
Testing Methods for Access Network. Interoperability of EPON Systems
|
|
YD/T 1820-2008
|
Telecommunication Cables. Central Office Symmetrical Cables
|
|
YD/T 841.1-2008
|
Plastic Pipe for Buried Communication Conduit. Part 1: General
|
|
YD/T 841.2-2008
|
Plastic Pipe for Buried Communication Conduit. Part 2: Solid-Wall Pipe
|
|
YD/T 841.3-2008
|
Plastic Pipe for Buried Communication Conduit. Part 3: Double-Wall Corrugated Pipe
|
|
YD/T 841.5-2008
|
Plastic Pipe for Buried Communication Conduit. Part 5: Plum Blossom Pipe
|
|
YD/T 1120-2007
|
Communication Cable. Foamed Polyethylene Dielectric Corrugated Cpooer Tube Outer Conductor Leaky Coaxial Cable
|
|
YD/T 1667-2007
|
Communication Cable. Foamed Polyethylene Dielectric, Smooth Copper-tube or Aluminum-tube Outer Conductor, 50 Ohm Radio Frequency Coaxial Cable for Wireless Communication
|
|
YD/T 723.4-2007
|
Laminated Metal Plastic Strip for Communication Cable and Optical Fibre Cable. Part 4: Laminated Copper Plastic Strip
|
|
YD/T 723.5-2007
|
Laminated Metal Plastic Strip for Communication Cable and Optical Fibre Cable. Part 5: Laminated Metal Plastic foil
|
|
YD/T 814.4-2007
|
Closure for optical fibre cables. Part 4: closure for microduct optical fibre cables
|
|
YD/T 1442-2006
|
The Technical Requirement for IPv6 -- Address, Transition and Quality of Service
|
|
YD/T 1450-2006
|
Testing Methods for IPv6 Routing Protocol. Border Gateway Protocol (BGP4)
|
|
YD/T 1451-2006
|
The Test Methods for Routing Protocol Based on IPv6 (OSPF)
|
|
YD/T 1479-2006
|
Technical Requirements and Testing Methods of Primary Reference Clock Equipment
|
|
YD/T 1542-2006
|
Technical Requirements and Testing Methods for Surge Protective Devices of Signaling Networks
|
|
YD 5072-2005
|
Supervision Specification of Telecommunications Conduit and Cable Channel Engineering
|
|
YD/T 1380.1-2005
|
Technical requirements of V5 interface. Part 1: V5.1 interface
|
|
YD/T 1380.2-2005
|
Technical requirements of V5 interface. Part 2: V5.2 interface
|
|
YD/T 1384-2005
|
Residential telecommunication generic cabling system
|
|
YD/T 590.1-2005
|
Plastic jacket joint closure fot telecommunication cable Part 1: General specification
|
|
YD/T 590.2-2005
|
Plastic jacket joint closure fot telecommunication cable. Part 2: Heat shrinkable joint closure
|
|
YD/T 590.3-2005
|
Plastic jacket joint closure fot telecommunication cable. Part 3: Plastic injection joint closure
|
|
YD/T 590.4-2005
|
Plastic jacket joint closure fot telecommunication cable. Part 4: Assembly joint closure
|
|
YD/T 590.5-2005
|
Plastic jacket joint closure fot telecommunication cable. Part 5: Aeriferous assembly joint closure
|
|
YD/T 814.2-2005
|
Closure for optical fiber cables. Part 2: Closure for optical fiber composite overhead ground wires
|
|
YD/T 814.3-2005
|
Closure for optical fiber cables. Part 3: Clousure for shallow water submarine optical fiber cables
|
|
YD/T 1092-2004
|
Telecommunication cable Foamed polyethylene dielectric, corrugated copper-tube outer conductor, 50 Ohm radio frequency coazial cable, For wireless communications
|
|
YD/T 1319-2004
|
Telecommunication cable-Foamed polyethylene dielectric, braided outer conductor, 50 ohm radio frequency coaxial cable for wireless telecommunication
|
|
YD/T 1324-2004
|
Unplasticized polyvinyl chloride (PVC-U) multi-hole pipe for buried telecommunication conduit
|
|
YD/T 814.1-2004
|
Closure for optical fiber cables Part 1: Closure for outdoor optical fiber cables
|
|
YD 5012-2003
|
Insulation Objective to Ground and Testing Method for Optical Cable Link
|
|
YD/T 1250-2003
|
Test method for access network. Passive optical network based on ATM (A-PON)
|
|
YD/T 1254-2003
|
Access network technical specification. TDD based Ethernet Digital Subscriber Line system (TDD-EDSL): Variable length frame transmission mode
|
|
YD/T 838.1-2003
|
Multicore and symmetrical pair/quad cables for digital communications. Part 1: Generic specification
|
|
YD/T 838.2-2003
|
Multicore and symmetrical pair/quad cables for digital communications. Part 2: Horizontal floor wiring
|
|
YD/T 838.3-2003
|
Multicore and symmetrical pair/quad cables for digital communications. Part 3: Work area wiring
|
|
YD/T 838.4-2003
|
Multicore and symmetrical pair/quad cables for digital communications. Part 4: Riser cables
|
|
YD/T 1019-2001
|
Multicore and Symmetrical Pair/Quad Cables for Digital Communications Horizontal Floor Wiring--Solid Polyolefin Insulate
|
|
YD/T 1115.1-2001
|
Waterblocking materials for telecommunication cable and optical fiber cable. Part1: Waterblocking Tape
|
|
YD/T 1115.2-2001
|
Waterblocking materials for telecommunication cable and optical fiber cable. Part 2: Waterblocking Yarn
|
|
YD/T 1156-2001
|
Test Specification for High. End Router
|
|
YD/T 926.1-2001
|
Telecommunication Generic Cabling System for Building Part 1: Generic Specification
|
|
YD/T 926.2-2001
|
Telecommunication Generic Cabling System for Building Part 2: Cable Requirements for Generic Cabling
|
|
YD/T 926.3-2001
|
Telecommunication Generic Cabling System for Building Part 3: Connecting Hardware Requirements for Generic Cabling
|
|
YD/T 1092-2000
|
Foamed Polyethylene Dielectric, Corrugated Copper-tube Outer Conductor, 50 ohm Radio Frequency Coaxial Cable for Wireless Communications
|
|
YD/T 839.1-2000
|
Filling compounds and flooding compounds for telecommunication cable and optical fiber cable. Part 1: Test method
|
|
YD/T 839.2-2000
|
Filling compounds and flooding compounds for telecommunication cable and optical fiber cable. Part2: Hot-application filling compounds
|
|
YD/T 839.3-2000
|
Filling compounds and flooding compounds for telecommunication cable and optical fiber cable. Part3: Cool-application filling compounds
|
|
YD/T 839.4-2000
|
Filling compounds and flooding compounds for telecommunication cable and optical fiber cable. Part4: Flooding compounds
|
|
YD/T 1014-1999
|
Technique criterion for STM-64 optical line terminal equipment
|
|
YD/T 1019-1999
|
Multicore and Symmetrical Pair/Quad Cables for Digital Communication Horizontal Floor Wiring. Solid Polyolefin Insulate
|
|
YD/T 1020-1999
|
Termite resistant jacket requirements for communication cable and optical fiber cable
|
|
YD 5062-1998
|
Distrlbuting Donduit Atlas for Telecommunication Cables
|