|
Std ID |
Description (Standard Title) |
|
YD/T 2022-2009
|
Technical requirements for time synchronization equipment
|
|
YD/T 901-2009
|
Stranded loose tube optical fibre cables For Outdoor Application for Telecommunication
|
|
YD/T 925-2009
|
Optical Fibre Cable Terminal Case
|
|
YD/T 979-2009
|
Specifications and Test Methods for Optical Fiber Ribbon
|
|
YD/T 981.1-2009
|
Optical Fiber Ribbon Cables for Access Network. Part 1: Slotted Core Type
|
|
YD/T 981.2-2009
|
Optical Fiber Ribbon Cables for Access Network. Part 2: Central Loose Tube Type
|
|
YD/T 981.3-2009
|
Optical fiber ribbon cables for access network. Part 3: Stranded loose tube type
|
|
YD/T 1181.2-2008
|
Characteristics of Non Metal Reinforcement for Optical Fiber Cables. Part 2: Aramid Yarme
|
|
YD/T 1766-2008
|
Failure Criteria of Reliability Tests for Optical Transceiver/Transponder Used in Optical Communications
|
|
YD/T 1770-2008
|
Indoor-Outdoor Optical Fibre Cables for Access Network
|
|
YD/T 1810-2008
|
Testing Methods for SDH-Based MSTP Embedded With MPLS
|
|
YD/T 1812.1-2008
|
Technical Specification and Testing Method of 10Gbit/s TOSA and ROSA. Part1: 10Gbit/s Uncooled TOSA
|
|
YD/T 1812.3-2008
|
Technical Specification and Testing of 10Gbit/s TOSA and ROSA Part3: 10Gbit/s ROSA
|
|
YD/T 1813-2008
|
Pump Laser Module of Fiber Amplifier for Communication Part 1: 980nm Pump Laser Modu
|
|
YD/T 1272.4-2007
|
Optical Fiber Connector. Part 4: Type FC
|
|
YD/T 1526.2-2007
|
Technical Specifications of Single Fiber Bi-Directional Triplexer Optical Transceiver for Access Network. Part 2: Single Fiber Bi-Directional Triplexer Optical Transceiver for EPON ONU
|
|
YD/T 1610-2007
|
Testing Methods for IPv6 Routing Protocl--Intermediate system to Intermediate system intra-domain routing exchange protocol (IS-IS)
|
|
YD/T 1616-2007
|
Technical Requirements for IP Multicast Service
|
|
YD/T 1617.1-2007
|
Intelligent optical protect system. Part 1: optical line protection system
|
|
YD/T 1618-2007
|
Technical Requirements and Testing Methods for Multi-fiber Cable Fan-out
|
|
YD/T 1632.1-2007
|
Telecommunication Optical Fiber Cables Installed in the Drainpipe. Part 1: Type of Self-supporting and Hanging
|
|
YD/T 1635-2007
|
Technical Requirements for IPv6 network. IPv6 Tunneling Technology with private network addresses through NAT devices
|
|
YD/T 1636-2007
|
Architecture and General Requirements for Fiber to the Home
|
|
YD/T 1664-2007
|
Technical Specification for Ethernet Passive Optical Network (EPON) Management Interface
|
|
YD/T 1668-2007
|
Technical Specification for STM-64 optical fiber line system
|
|
YD/T 1687.1-2007
|
Technical Requirements of High Speed Semiconductor Laser Assembly for Optical Fiber Communication. Part 1: 2.5Gbit/s Cooled Direct Modulation Semiconductor Laser Assembly
|
|
YD/T 1687.2-2007
|
Technical Requirements of High Speed Semiconductor Laser Assembly for Optical Fiber Communication. Part 1: 2.5Gbit/s Uncooled Direct Modulation Semiconductor Laser Assembly
|
|
YD/T 1688.1-2007
|
Technical Conditions of Optical Transceiver Module for XPON Part 1: Optical Transceiver Module for APON(BPON)OLT/ONU
|
|
YD/T 1689-2007
|
Technical Requirements and Test Methods for Mechanical Optical Switch
|
|
YD/T 1709-2007
|
Technical Requirements for Pseudo-Wire Emulation Edge-to-Edge
|
|
YD/T 1714-2007
|
Optical Fibers Distribution Frame in Dense Wavelength Division Multiplexing
|
|
YD/T 988-2007
|
Cross Connecting Cabinet for Communication Optical Cable
|
|
YD/T 1465-2006
|
Technical Conditions for 10Gbit/s Small Form Factor Pluggable Transceiver Module
|
|
YD/T 1072-2006
|
Testing method for IP telephony gateway
|
|
YD/T 1258.6-2006
|
The series of indoor optical fiber cables. Part 6: Plastic optical cables
|
|
YD/T 1419.3-2006
|
Technical Conditions of Triplexer Optical Assembly for Access Network Part 3: General Characteristics of Triplexer Optical Assembly for GPON ONU
|
|
YD/T 1437-2006
|
Digital distribution frame
|
|
YD/T 1439-2006
|
Router security test methods. high end router (IPv4)
|
|
YD/T 1440-2006
|
Router security test methods. middle/low end router (IPv4)
|
|
YD/T 1447-2006
|
Plasic Optical Fibre for Communication
|
|
YD/T 1460.1-2006
|
Telecommunication micro duct optical fiber cables and fiber units for installation by blowing. Part 1: General
|
|
YD/T 1460.2-2006
|
Telecommunication microduct optical fibre cables and fibre units for installation by blowing. Part 2: Outer protective ducts
|
|
YD/T 1460.3-2006
|
Telecommunication microduct optical fibre cables and fibre units for installation by blowing - Part 3: Microducts, microduct bundles and microduct accessories
|
|
YD/T 1460.4-2006
|
Telecommunication microduct optical fibre cables and fibre units for installation by blowing. Part 4: Microduct optical fibre cables
|
|
YD/T 1460.5-2006
|
Telecommunication microduct optical fibre cables and fibre units for installation by blowing. Part 5: Enhanced performance fibre units
|
|
YD/T 1461-2006
|
Telecommunication optical fibre cables installed in micro-trench
|
|
YD/T 1463-2006
|
Test Methods for Coarse Wavelength Division Multiplexing (CWDM) System
|
|
YD/T 1464-2006
|
Test for Optical Fiber Transceiver
|
|
YD/T 1471-2006
|
Service Technical Requirements for Layer 2 VIirtual Private Network (VPN) Based on IP
|
|
YD/T 1481-2006
|
Technical Requirements of SIP Server Equipment
|
|
YD/T 1515-2006
|
Technical Specification for IPv6 Routing Protocol. Intermediate System to Intermediate System Intra-domain Routing Information Exchange Protocol (IS-IS)for IPv6 Routing Protocol
|
|
YD/T 1516-2006
|
Technical Requirements for Interlligent Terminal Equipment based on IP: IP Telephone Terminal
|
|
YD/T 1517-2006
|
Testing Method for Intelligent Terminal Equipment based on IP: IP Telephone Terminal
|
|
YD/T 1518-2006
|
Interoperability Specification and Test Measurement for VoIP Accessing Equipment Based H.248
|
|
YD/T 1519-2006
|
Interoperability Specification and Test Measurement for VoIP Accessing Equipment based on MGCP
|
|
YD/T 1520-2006
|
Interoperability Specification and test measurement for H.323 based VoIP accessing equipment
|
|
YD/T 1521-2006
|
Testing Specification Routing Rrotocol Interoperability
|
|
YD/T 1523-2006
|
Testing Methods to Session Initiation Protocol Server
|
|
YD/T 1526.1-2006
|
Technical specifications of single fiber Bi-Directional Triplexer optical Transceiver for access network. Part 1: single fiber Bi-Directional Triplexer optical Transceiver for BPON ONU
|
|
YD/T 1527-2006
|
Technical requirements and test methods for optoelectronic(wavelength/mode)converter
|
|
YD/T 1528-2006
|
Technical requirements for optical fiber transceiver
|
|
YD/T 1529-2006
|
Technical conditions for optical fiber line auto switch Protection equipment
|
|
YD/T 1531-2006
|
Test Method for Access Network Equipment. Passive Optical Network Based on Ethernet(EPON)
|
|
YD/T 1588.1-2006
|
Measurement methods for characteristics of optical fibre cable line. Part 1: Link attenuation
|
|
YD/T 1588.2-2006
|
Measurement methods for characteristics of optical fibre cable line. Part 2: Optical fibre splice loss
|
|
YD/T 778-2006
|
Optical fiber distribution frames
|
|
YD/T 1272.3-2005
|
Optical fiber connector Part 3: Type SC connector family
|
|
YD 5091-2005
|
Specification for Seismic Test of Optical Transmissions Equipment
|
|
YD/T 1258.4-2005
|
The series of indoor optical fiber cables. Part 4: Multi-fiber optical cables
|
|
YD/T 1258.5-2005
|
The series of indoor optical fiber cables. Part 5: Optical fiber ribbon cables
|
|
YD/T 1272.2-2005
|
Optical filber connector. PartⅡ: Type MT-RJ Connector Family
|
|
YD/T 1339-2005
|
Test methods of metropolitan optical transport network WDM ring
|
|
YD/T 1341-2005
|
Internet Protocol version6(IPv6) specification
|
|
YD/T 1342-2005
|
IPv6 routing protocol. Border Gateway Protocol4 (BGP4) for IPv6
|
|
YD/T 1343-2005
|
Technical specification for neighbor discovery protocol IPv6
|
|
YD/T 1344-2005
|
IPv6 address structure protocol. IPv6 stateless address auto configuration
|
|
YD/T 1351-2005
|
Technical requirement and test methods of optical transceiver module for coarse wavelength division multiplexing system
|
|
YD/T 1352-2005
|
Technical requirement and test method of gigabit Ethernet optical transceiver module
|
|
YD/T 1353-2005
|
Technical requirement and test method of the high speed photodetector-preampligier used for the optical fiber communication
|
|
YD/T 1354-2005
|
Technical requirement and test method of optical interleaver
|
|
YD/T 1383-2005
|
Technical requirements for WDM element management system
|
|
YD/T 1419.1-2005
|
Technical conditions of Triplexer optical assembly for access network Part 1: General characteristics of Triplexer optical assembly for Broadband passive optical network (BPON) light network unit (ONU)
|
|
YD/T 1419.2-2005
|
Technical conditions of Triplexer optical assembly for access network Part 2: General characteristics of Triplexer optical assembly for Broadband passive optical network (EPON) light network unit (ONU)
|
|
YD/T 5122-2005
|
Specifications of Engineering Acceptance for Long-Haul Optical Wavelength Division Multiplexing System
|
|
YD/T 1318-2004
|
Technical condition of 1310nm/1550nm single filber bi-directional assembly (module) for short reach
|
|
YD/T 1320-2004
|
Technical requirements and tests methods of optical Dense Wavelength Division Multiplexer/demultiplexer
|
|
YD/T 1321.1-2004
|
Technical condition of the transponder with multiplex/demultiplex functions. Part 1: 2.5Gbit/s transponder
|
|
YD/T 1321.2-2004
|
Technical condition of the transponder with multiplex/demultiplex functions. Part 2: 10Gbit/s transponder
|
|
YD/T 1326-2004
|
Technical requirements of coarse wavelength division multiplexing (CWDM)
|
|
YD/T 1327-2004
|
Technical requirements and testing methods of Coarse Wavelength Division Multiplexer (CWDM) /Demulyiplexer
|
|
YD/T 1258.1-2003
|
The series of indoor optical fibre cables part 1: general
|
|
YD/T 1258.2-2003
|
The series of indoor optical fibre cables part 2: single-fibre optical cable
|
|
YD/T 1258.3-2003
|
The series of indoor optical fibre cables part3: dual-fibre optical cable
|
|
YD/T 1272.1-2003
|
Optical filber connector. Part 1: Type LC
|
|
YD/T 1273-2003
|
Technical specification for terminal equipment of optical Wavelength Division Multiplexing (WDM). 16×10Gb/s and 32×10Gb/s parts
|
|
YD/T 1274-2003
|
Technical specification for optical Wavelength Divison Multiplexing (WDM) system. 160×10Gb/s, 80×10Gb/s part
|
|
YD/T 1294-2003
|
Technical requirements of optical transceiver modules for ATM passive optical networks (A-PON). 155Mb/s burst-mode transceiver modules
|
|
YD/T 769-2003
|
Optical cables for core network - central tube outdoor optical cables for communication
|
|
YD/T 816-2003
|
Multimode optical fibre with large core diameter and large numerical aperture
|
|
YD/T 1181.1-2002
|
Characteristics of Non-metal Reinforcement Used for Optical Cable Part1: Glass Fiber Reinforced Plastic Rods
|