|
Std ID |
Description (Standard Title) |
|
YD/T 2987-2016
|
Testing methods for evolved high rate packet data (eHRPD) A interface in 800MHz/2GHz cdma2000 digital cellular mobile communication network
|
|
YD/T 2988-2016
|
(800MHz / 2GHz cdma2000 digital cellular mobile telecommunication network Evolved High Rate Packet Data (eHRPD) technical requirements for access network equipment)
|
|
YD/T 2989-2016
|
(High-speed packet data 800MHz / 2GHz cdma2000 digital cellular mobile telecommunication network evolution (eHRPD) access network equipment test methods)
|
|
YD/T 2990-2016
|
(800MHz / 2GHz cdma2000 digital cellular mobile telecommunication network Evolved High Rate Packet Data (eHRPD) technical requirements for the access terminal equipment)
|
|
YD/T 2991-2016
|
Test methods for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication-Access terminal of eHRPD
|
|
YD/T 2992-2016
|
Technical requirements and test methods of cdma2000/cdma2000 eHRPD dual mode digital mobile communication terminal
|
|
YD/T 3040-2016
|
Technical Requirements for multimode dual-card multi-standby user equipment of LTE/CDMA/TD-SCDMA/WCDMA/GSM (GPRS)
|
|
YD/T 3041-2016
|
Test methods for multimode dual-card multi-standby user equipment of LTE/CDMA/TD-SCDMA/WCDMA/GSM (GPRS)
|
|
YD/T 3093-2016
|
Test Methods for Mobile Tablets
|
|
YD/T 3097-2016
|
Equipment technical requirements for cdma2000 circuit switch and E-UTRAN interworking solution (IWS)
|
|
YD/T 3098-2016
|
Equipment tet methods for cdma2000 circuit switch and E-utran interworking solution (IWS)
|
|
YD/T 3099-2016
|
Air interface technical requirement for cdma2000 circuit switched and E-UTRAN interworking
|
|
YD/T 3100-2016
|
Air interface signaling interoperation testing methods for cdma2000 circuit switch and E-UTRAN interworking
|
|
YD/T 3111-2016
|
Ambient noise rejection performance requirement and test method for communication terminal equipments
|
|
YD/T 3171-2016
|
(800MHz/2GHz cdma2000 digital cellular mobile communication network (second stage) air interface technology requirements physical layer)
|
|
YD/T 3172-2016
|
Technical requirements of air interface for 800MHz/2GHz cdma2000 digital cellular mobile communication network(Phase 2). MAC layer
|
|
YD/T 3173-2016
|
Technical requirements of air interface for 800MHz/2 GHz cdma2000 digital cellular mobile communication network(Phase 2). LAC layer
|
|
YD/T 3174-2016
|
(800MHz/2GHz cdma2000 digital cellular mobile communication network (second stage) air interface technical requirements layer 3)
|
|
YD/T 3175-2016
|
Technical requirements of mobile station for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network (Phase II) equipment
|
|
YD/T 3176.1-2016
|
Test method of mobile station for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network(Phase II). Part 1: Minimum standard, function and performance
|
|
YD/T 3179.2-2016
|
Test method for user equipment of Voice over LTE(VoLTE) Part 2: Conformance test
|
|
YD/T 1682-2016
|
CDMA digital cellular mobile communication network removed user identify module(R-UIM)test method
|
|
YD/T 1683-2016
|
(Inter-port test method for CDMA digital cellular mobile communication network mobile device (ME) and mobile subscriber identification module (R-UIM))
|
|
YD/T 1168-2015
|
(CDMA digital cellular mobile communication network removable user identity module (R-UIM) Technical Requirements)
|
|
YD/T 1682-2015
|
(CDMA digital cellular mobile communication network Removable User Identity Module (R-UIM) Test Method)
|
|
YD/T 1683-2015
|
(CDMA digital cellular mobile communication network of mobile equipment (ME) and removable user identity module (R-UIM) interface between test methods)
|
|
YD/T 1843.2-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network high speed uplink packet access (HSUPA) Uu interface to the physical layer specification Part 2: physical channel and transport channel is mapped to the physical channel)
|
|
YD/T 1845-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network high speed uplink packet access (HSUPA) Uu Interface RRC layer specification)
|
|
YD/T 1847.4-2015
|
((HSUPA) Iub interface technology - Part 4 2GHz TD-SCDMA digital cellular mobile communication network high speed uplink packet access: NBAP signaling)
|
|
YD/T 1849-2015
|
2GHz TD-SCDMA digital cellular mobile telecommunication nerwork Technical requirement of HSUPA RAN
|
|
YD/T 1850-2015
|
2GHz TD-SCDMA digital cellular mobilre telecommunication network tset method of HSUPA RAN
|
|
YD/T 2833.1-2015
|
(LTE terminal EMI requirements and measuring methods - Part 1: TD-LTE terminal)
|
|
YD/T 2855.1-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network multi-carrier high-speed packet access Uu interface to the physical layer specification - Part 1: Overview)
|
|
YD/T 2855.2-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network multi-carrier high-speed packet access Uu interface to the physical layer specification Part 2: physical channel and transport channel is mapped to the physical channel)
|
|
YD/T 2855.3-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network multi-carrier high-speed packet access Uu interface to the physical layer specification - Part 3: Multiplexing and channel coding)
|
|
YD/T 2855.4-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network multi-carrier high-speed packet access Uu interface to the physical layer specification - Part 4: spread spectrum and modulation)
|
|
YD/T 2855.5-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network multi-carrier high-speed packet access Uu interface to the physical layer specification - Part 5: Physical layer procedures)
|
|
YD/T 2855.6-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network multi-carrier high-speed packet access Uu interface to the physical layer specification Part 6: Physical Layer Measurement)
|
|
YD/T 2856.1-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network multi-carrier high-speed packet access Uu Interface Layer 2 technology - Part 1: MAC protocol)
|
|
YD/T 2856.2-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network multi-carrier high-speed packet access Uu Interface Layer 2 technology - Part 2: RLC protocol)
|
|
YD/T 2856.3-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network multi-carrier high-speed packet access Uu Interface Layer 2 Technical Requirements Part 3: PDCP protocol)
|
|
YD/T 2857-2015
|
(2GHz TD-SCDMA digital cellular mobile communication network multi-carrier high-speed packet access Uu Interface RRC layer specification)
|
|
YD/T 2858.4-2015
|
(Iub interface technology - Part 4 2GHz TD-SCDMA digital cellular mobile communication network multi-carrier high-speed packet access: NBAP signaling)
|
|
YD/T 2861-2015
|
Technical requirements and test methods for multimode dual-SIM multi - standby user equipment of LTE/CDMA/GSM(GPRS)
|
|
YD/T 2862-2015
|
(LTE / WCDMA / GSM (GPRS) multi-mode dual card dual standby Terminal Equipment Technical Requirements)
|
|
YD/T 2863-2015
|
(LTE / WCDMA / GSM (GPRS) multi-mode dual card dual standby terminal device test method)
|
|
YD/T 2864-2015
|
Technical requirement of LTE/TD-SCDMA/WCDMA/GSM(GPRS) multimode dual-(U)SIM multi-standby digital user equipment
|
|
YD/T 2865-2015
|
(LTE / TD-SCDMA / WCDMA / GSM (GPRS) multi-mode dual card multi-standby terminal device test method)
|
|
YD/T 2869.1-2015
|
(MIMO terminal antenna performance requirements and measuring methods - Part 1: LTE wireless terminal)
|
|
YD/T 2870-2015
|
(Satellite communication earth station equipment vehicle (mobile use) antenna and servo system test method)
|
|
YD/T 2871-2015
|
(Satellite communication earth station equipment vehicle (still in use) antenna and servo system test method)
|
|
YD/T 2872-2015
|
(Satellite communication earth station equipment may carry a portable antenna and servo system test method)
|
|
YD 5100.1-2014
|
(Mobile communication base station equipment to detect anti-seismic performance specifications of the first part: the base station equipment)
|
|
YD 5100.2-2014
|
(Mobile communication base station equipment to detect anti-seismic performance specifications Part II: a base station controller device)
|
|
YD/T 2734.2-2014
|
Test method for user equipment (HSPA+) of 2GHz TD-SCDMA digital cellular mobile communication network Part 2: Network compatibility test
|
|
YD/T 2735-2014
|
Test specification for 2GHz TD-SCDMA digital cellular mobile telecommunication network HSPA+ user equipment (UE)protocol conformance
|
|
YD/T 2740.1-2014
|
(Wireless communication indoor signal distribution systems - Part 1: General technical requirements)
|
|
YD/T 2740.3-2014
|
(Wireless communication indoor signal distribution systems - Part 3: Requirements and test methods amplifier technology)
|
|
YD/T 2740.5-2014
|
Indoor signal distributing system-part 5: Technical requirement and test method for passive devices
|
|
YD/T 2740.6-2014
|
Indoor signal distributing system Part 6: Network test method
|
|
YDB 150-2014
|
Trunking service based on TD-LTE public mobile telecommunication network - Technique requirement for core network (Phase 1)
|
|
YDB 151-2014
|
Trunking service based on TD-LTE public mobile telecommunication network - RAN technical requirement (Phase 1)
|
|
YDB 152-2014
|
Trunking service based on TD-LTE public mobile telecommunication network-Technical requirement for user equipment (Phase 1)
|
|
YDB 153-2014
|
Trunking service based on TD-LTE public mobile telecommunication network - General technical requirement (Phase 1)
|
|
YD/T 2576.1-2013
|
Test method for user equipment of TD-LTE digital cellular mobile telecommunication network (Phase 1) - Part 1: Basic operation, services and reliability test
|
|
YD/T 2576.2-2013
|
Test method for user equipment of TD-LTE digital cellular mobile telecommunication network (phase 1) - Part 2: Radio transmission and reception performance test
|
|
YD/T 1556-2013
|
Technical requirement for 800MHz/2GHz cdma2000 digita cellular mobile telecommunication network equipment-Base station subsystem
|
|
YD/T 1558-2013
|
Technical requirements of mobile station for 800MHz/2GHz cdma2000 digital cellularmobile telecommunication network
|
|
YD/T 1562-2013
|
Technical requirements for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network equipment high rate packet data (Phase). Access terminal
|
|
YD/T 1567-2013
|
Test method for 800MHz/2GHz cdma2000 digital cellular mobiletelecommunication network equipment high rate packet data (Phasel) Access Terminal
|
|
YD/T 1573-2013
|
Test method for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network equipmen. Base station subsystem
|
|
YD/T 1576.1-2013
|
Test method of mobile station for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network. Part 1: Minimum standard, function and performance
|
|
YD/T 1677-2013
|
Technical requirement for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network equipment high rate packet date(Phase 2). Access network
|
|
YD/T 1678-2013
|
Test method for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network equipment.High rate packet date(Phase 2). Access network
|
|
YD/T 1679-2013
|
Technical requirement for 800MHz/2GHz cdma2000 digital cellular mobile communication network equipment. High rate packet data (Phase 2). Access terminal
|
|
YD/T 1680-2013
|
Test method for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network equipment-High data rate packet data (Phase 2). Access terminal
|
|
YD/T 2477-2013
|
Technical requirements for system of SCDMA broadband wireless access system support trunking service
|
|
YD/T 2478-2013
|
Technical requirements for terminal of SCDMA broadband wireless access system support trunking service
|
|
YD/T 2479-2013
|
Technical requirements for air iterface of SCDMA broadband wireless access system support trunking service
|
|
YD/T 2504.1-2013
|
2GHz TD-SCDMA digital cellular mobile telecommunication network. HSPA+ physical layer technical requirement. Part 1: general desciption
|
|
YD/T 2504.2-2013
|
2GHz TD-SCDMA digital celllar mobile telecommunication network. HSPA+ physical layer technical requirement. Part 2: physical channels and mapping of transport channels onto physical channels
|
|
YD/T 2504.3-2013
|
2GHz TD-SCDMA digital cellular mobile telecommunication network. HSPA+ physical layer technical requirement. Part 3: multiplexing and channel coding
|
|
YD/T 2504.4-2013
|
2GHz TD-SCDMA digital cellular mobile telecommunication network. HSPA+ physical layer technical requirement. Part 4: spreading and modulation
|
|
YD/T 2504.5-2013
|
2GHz TD-SCDMA digital cellular mobile telecommunication network. HSPA+ physical layer technical requirements. Part 5: physical layer procedure
|
|
YD/T 2504.6-2013
|
2GHz TD-SCDMA digital cellular mobile telecommunication network. HSPA+ physical layer technical requirement. Part 6: physical layer measurement
|
|
YD/T 2505.1-2013
|
2GHz TD-SCDMA digital cellular mobile telecommunication network-HSPA+ Uu interface layer 2 technical requirement. Part 1: MAC protocol
|
|
YD/T 2505.2-2013
|
2GHz TD-SCDMA digital cellular mobile telecommunication network-HSPA+ Uu interface layer 2 technical requirements. Part 2: RLC protocol
|
|
YD/T 2505.3-2013
|
2GHz TD-SCDMA digital cellular mobile telecommunication nework - HSPA+ Uu interface layer 2 technical requirements. Part 3: packet data convergence protocol (PDCP)
|
|
YD/T 2506-2013
|
2GHz TD-SCDMA digital cellular mobile communication network enhanced high-speed packet access (HSPA +) Uu Interface RRC layer technical requirements
|
|
YD/T 2508-2013
|
2GHz TD-SCDMA digital cellular mobile telecommunication network. Test method for Iub interface in HSPA+ RAN
|
|
YD/T 2509-2013
|
2GHz TD-SCDMA digital cellular mobile telecommunication network. Technical requirement of HSPA+ RAN
|
|
YD/T 2510-2013
|
2GHz TD-SCDMA digital cellular mobile telecommuniation network Test method of HSPA+RAN
|
|
YD/T 2517-2013
|
Technical requirements for 2GHz WCDMA digital cellular mobile communication network user equipment (Phase 5). High speed packet access plus (HSPA+)
|
|
YD/T 2520-2013
|
Technical requirements and testing methods for cdma2000 HRPD(cdma2000)/WCDMA(GSM) dual mode single standby digital mobile station
|
|
YD/T 2522-2013
|
CDMA digital cellular mobile telecommunication network UICC-MEinterface test method-UICC supporting CSIM application
|
|
YD/T 2525-2013
|
CDMA digital cellular mobile telecommunication network UICC-ME interface technical requirement. Characteristics of the CSIM application supporting OMH
|
|
YD/T 2575-2013
|
Technical requirements for user equipment of TD-LTE digital cellular mobile telecommunication network (phase 1)
|
|
YD/T 2576.3-2013
|
Test method for user equipment of TD-LTE digital cellular mobile telecommunication network (phase 1). Part 3: radio resource management performance test
|
|
YD/T 2576.4-2013
|
Test method for user equipment of TD-LTE digital cellular mobile telecommunication network(Phasel). Part4: protocol comformance test
|
|
YD/T 2576.5-2013
|
Test method for user equipment of TD-LTE digital cellular mobile telecommunication networ (Phasel). Parts: network compatibility test
|