|
Std ID |
Description (Standard Title) |
|
GB/T 6104-1985
|
Powered industrial trucks--Terminology
|
|
GB/T 6104-2005
|
Powered industrial trucks -- Terminology
|
|
GB/T 6107-1985
|
Interface between data terminal equipment and data circuit-terminating equipment employing serial binary data interchange
|
|
GB/T 6107-2000
|
Interface between data terminal equipment and data circuit termination equipment employing serial binary data interchange
|
|
GB/T 6108.1-1985
|
Conductors for winding wires--Part 1: General
|
|
GB/T 6108.1-2003
|
Basic dimensions of winding wires -- Part 1: round winding wire conductor diameter
|
|
GB/T 6108.2-1985
|
Conductors for winding wires--Part 2: Dimensions of round conductors
|
|
GB/T 6108.2-2003
|
Basic dimensions of winding wires -- Part 2: the maximum outer diameter of enamelled round winding wires
|
|
GB/T 6108.3-1985
|
Conductors for winding wires--Part 3: Dimensions of rectangular conductors
|
|
GB/T 6108.3-2003
|
Basic dimensions of winding wires -- Part 3: flat copper winding wire conductor size
|
|
GB/T 6109.10-1990
|
Enamelled round winding wires--Part 10: Polyester (imide) enamelled round copper wires overcoated with polyamide, class 180
|
|
GB/T 6109.10-2008
|
Enamelled round winding wire -- Part 10: Solderable polyurethane enamelled round copper wire, class 155
|
|
GB/T 6109.11-1990
|
Enamelled round winding wires--Part 11: Polyester (imide) enamelled round copper wires overcoated with polyamide-imide, class 200
|
|
GB/T 6109.11-2008
|
Enamelled round winding wire -- Part 11: Solderable polyurethane enamelled round copper wire overcoated with polymide, class 155
|
|
GB/T 6109.1-1990
|
Enamelled round winding wires--Part 1: General
|
|
GB/T 6109.1-2008
|
Enamelled round winding wire -- Part 1: General requirements [including MODIFICATION 1]
|
|
GB/T 6109.12-2008
|
Enamelled round winding wire -- Part 12: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
|
|
GB/T 6109.13-2008
|
Enamelled round winding wire -- Part 13: Solderable polyesterimide enamelled round copper wire, class 180
|
|
GB/T 6109.14-2008
|
Enamelled round winding wire -- Part 14: Polyamide-imide enamelled round copper wire, class 200
|
|
GB/T 6109.15-2008
|
Enamelled round winding wire -- Part 15: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
|
|
GB/T 6109.16-2008
|
Enamelled round winding wire -- Part 16: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
|
|
GB/T 6109.17-2008
|
Enamelled round winding wire -- Part 17: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
|
|
GB/T 6109.18-2008
|
Enamelled round winding wire -- Part 18: Polyesterimide enamelled round copper wire, class 180, with a bonding layer
|
|
GB/T 6109.19-2008
|
Enamelled round winding wire -- Part 19: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer
|
|
GB/T 6109.20-2008
|
Enamelled round winding wire -- Part 20: Polyester on polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
|
|
GB/T 6109.21-2008
|
Enamelled round winding wire -- Part 21: Polyester-amide-imide enamelled round copper wire, class 200
|
|
GB/T 6109.2-1990
|
Enamelled round winding wires--Part 2: Modified polyester enamelled round copper wires, class 155
|
|
GB/T 6109.2-2008
|
Enamelled round winding wire -- Part 2: Polyester enamelled round copper wire, class 155
|
|
GB/T 6109.22-2008
|
Enamelled round winding wire -- Part 22: Aromatic polyimide enamelled round copper wire, class 240
|
|
GB/T 6109.23-2008
|
Enamelled round winding wire -- Part 23: Solderable polyurethane enamelled round copper wire, class 180
|
|
GB/T 6109.3-1985
|
Enameled round winding wires--Part 3: Polyvinyl-formal enameled round copper wires with high mechanical properties
|
|
GB/T 6109.3-2008
|
Enamelled round winding wire -- Part 3: Polyvinyl acetal enamelled round copper wire, class 120
|
|
GB/T 6109.4-1988
|
Enamelled round winding wires--Part 4: Self-fluxing polyurethane enamelled round copper wires
|
|
GB/T 6109.4-2008
|
Enamelled round winding wire -- Part 4: Solderable polyurethane enamelled round copper wire, class 130
|
|
GB/T 6109.5-1988
|
Enamelled round winding wires--Part 5: Polyesterimide enamelled round copper wires with a temperature index of 180
|
|
GB/T 10819-2005
|
Wooden skid
|
|
GB/T 6109.6-1988
|
Enamelled round winding wires--Part 6: Polyimide enamelled round copper wires with a temperature index of 220
|
|
GB/T 6109.6-2008
|
Enamelled round winding wire -- Part 6: Polymide enamelled round copper wire, class 220
|
|
GB/T 6109.7-1990
|
Enamelled round winding wires--Part 7: Polyester enamelled round copper wires, class 130
|
|
GB/T 6109.7-2008
|
Enamelled round winding wire -- Part 7: Polyester enamelled round copper wire, class 130L
|
|
GB/T 6109.8-1989
|
Enamelled round winding wires--Part 8: Heat or solvent bonding polyester enamelled round copper wires
|
|
GB/T 6109.9-1989
|
Enamelled round winding wires--Part 9: Heat or solvent bonding solderable polyurethane enamelled round copper wires
|
|
GB/T 6109.9-2008
|
Enamelled round winding wire -- Part 9: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130
|
|
GB/T 6110-1985
|
Hardmetal dies for drawing wires and bars--Types and dimensions
|
|
GB/T 6110-2008
|
Carbide dies for drawing -- Types and dimensions
|
|
GB/T 6111-1985
|
Standard test method for time-to-failure of thermoplastic pipe under constant internal pressure
|
|
GB/T 10820-1989
|
Boilers using coal for daily life--Thermal efficiency
|
|
GB/T 611-1988
|
Chemical reagent--General method for the determination of density
|
|
GB/T 611-2006
|
Chemical reagent -- General method for the determination of density
|
|
GB/T 6112-1985
|
Standard test method for impact resistance of thermoplastic pipe and fittings by means of a tup (falling weight)
|
|
GB/T 6113.101-2008
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-1: Radio disturbance and immunity measuring apparatus -- Measuring apparatus
|
|
GB/T 6113.101-2016
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-1: Radio disturbance and immunity measuring apparatus -- Measuring apparatus
|
|
GB/T 6113.102-2008
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-2: Radio disturbance and immunity measuring apparatus -- Ancillary equipment -- Conducted disturbances
|
|
GB/T 6113.103-2008
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-3: Radio disturbance and immunity measuring apparatus -- Ancillary equipment -- Disturbances power
|
|
GB/T 6113.104-2008
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-4: Radio disturbance and immunity measuring apparatus -- Ancillary equipment -- Radiated disturbances
|
|
GB/T 6113.104-2016
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-4: Radio disturbance and immunity measuring apparatus -- Antennas and test sites for radiated disturbance measurements
|
|
GB/T 6113.105-2008
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-5: Radio disturbance and immunity measuring apparatus -- Antenna calibration test sites for 30 MHz to 1 000 MHz
|
|
GB/T 6113.1-1995
|
Specifications for radio disturbance and immunity measuring apparatus
|
|
GB/T 6113.201-2008
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-1: Methods of measurement of disturbances and immunity -- Conducted disturbance measurements
|
|
GB/T 6113.202-2008
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-2: Methods of measurement of disturbances and immunity -- Measurement of disturbance power
|
|
GB/T 6113.203-2008
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-3: Methods for measurement of disturbances and immunity -- Radiated disturbance measurements
|
|
GB/T 6113.203-2016
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-3: Methods of measurement of disturbances and immunity -- Radiated disturbance measurements
|
|
GB/T 6113.204-2008
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-4: Methods of measurement of disturbances and immunity -- Immunity measurements
|
|
GB/T 6113.2-1998
|
Methods of measurement of radio disturbance and immunity
|
|
GB/T 6113.402-2006
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 4-2: Uncertainties, statistics and limit modelling -- Measurement instrumentation Uncertainty
|
|
GB/T 6115.1-1998
|
Series capacitors for power systems. Part 1: General--Performance, testing and rating--Safety requirements--Guide for installation
|
|
GB/T 6115.1-2008
|
Series capacitors for power systems -- Part 1: General
|
|
GB/T 6115.2-2002
|
Series capacitors for power systems -- Part 2: Protective equipment for series capacitor banks
|
|
GB/T 6115.3-2002
|
Series capacitors for power systems -- Part 3: Internal fuse
|
|
GB/T 6115.4-2014
|
Series capacitors for power systems -- Part 4: Thyristor-controlled series capacitors
|
|
GB/T 6115-1985
|
Series capacitors
|
|
GB/T 6116-1985
|
End mills with flatted parallel shank
|
|
GB/T 6117.1-1996
|
End mills--Part 1: Milling cutters with parallel shanks
|
|
GB/T 6117.1-2010
|
End mills -- Part 1: Milling cutters with parallel shanks
|
|
GB/T 6117.2-1996
|
End mills--Part 2: Milling cutters with Morse taper shanks
|
|
GB/T 6117.2-2010
|
End mills -- Part 2: Milling cutters with Morse taper shanks
|
|
GB/T 6117.3-1996
|
End mills--Part 3: Milling cutters with 7/24 taper shanks
|
|
GB/T 6117.3-2010
|
End mills -- Part 3: Milling cutters with 7: 24 taper shanks
|
|
GB/T 6118-1996
|
End mills--Technical specifications
|
|
GB/T 6118-2010
|
End mills -- Technical specifications
|
|
GB/T 6119.1-1996
|
Side and face milling cutter--Tapes and dimensions
|
|
GB/T 6119.2-1996
|
Side and face milling cutter--Technical specifications
|
|
GB/T 6119-1985
|
Side and face milling cutters technical specifications
|
|
GB/T 6119-2012
|
Side and face milling cutter
|
|
GB/T 61-1976
|
Nuts--Technical requirements
|
|
GB/T 6120-1996
|
Metal slitting saws--Types and dimensions
|
|
GB/T 6120-2012
|
Metal slitting saw
|
|
GB/T 6121-1996
|
Metal slitting saws--Technical specifications
|
|
GB/T 6122.1-2002
|
Corner-rounding cutters -- Part 1: The types and dimensions
|
|
GB/T 6122.2-2002
|
Corner-rounding cutters -- Part 2: The technical specifications
|
|
GB/T 6122-1985
|
Corner-rounding cutters
|
|
GB/T 6124.1-1996
|
T-slot cutters. Part 1: Dimensions of T-slot cutters with plain or flated parallel shanks
|
|
GB/T 6124.2-1996
|
T-slot cutters. Part 2: Dimensions of T-slot cutters with Morse taper shanks with tapped holes
|
|
GB/T 6124.7-2014
|
Test method of organic chemical products. Part 7: Determination of molten color
|
|
GB/T 6124-2007
|
T-slot cutters -- Types and sizes
|
|
GB/T 6125-1996
|
T-slot cutters--Technical specifications
|
|
GB/T 6125-2007
|
T-slot cutters -- Technical specifications
|
|
GB/T 6128.1-1996
|
Angle milling cutter--Part 1: The types and dimensions for single angle cutter
|
|
GB/T 6128.1-2007
|
Angle milling cutter -- Part 1: The single and double unequal-angle cutters
|
|
GB/T 6128.2-1996
|
Angle milling cutter--Part 2: The types and dimensions for double unequal-angle cutters
|