GB/T 6109.15-2008 English PDF

US$214.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6109.15-2008: Enamelled round winding wire -- Part 15: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6109.15-2008	214	Add to Cart	3 days	Enamelled round winding wire -- Part 15: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer	Valid

Similar standards

GB/T 4074.21   GB/T 4074.3   GB/T 6109.5   GB/T 6109.12   GB/T 6109.13   GB/T 6109.11   

Basic data

Standard ID: GB/T 6109.15-2008 (GB/T6109.15-2008)
Description (Translated English): Enamelled round winding wire -- Part 15: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K12
Classification of International Standard: 29.060.01
Word Count Estimation: 11,162
Date of Issue: 2008-04-23
Date of Implementation: 2008-12-01
Older Standard (superseded by this standard): GB/T 6109.9-1989
Quoted Standard: GB/T 6109.1-2008
Adopted Standard: IEC 60317-2-2000, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 6 of 2008 (total 119)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the pair of 130 self-adhesive paint straight welding enamelled round copper wire requirements. Within a polyurethane resin-based paint, if you can retain the original resin and meets the chemical properties of all the requirements of the enameled wire, the resin can be modified. Topcoat layer is made of a thermoplastic resin -based adhesive layer. 130 of the heat stage, which requires a minimum temperature index of 130, a heat shock temperature of at least 155��C. Corresponds to the temperature in Celsius temperature index is not recommended use temperature enameled wire, because it depends on factors including the type of equipment, including a lot of factors.

GB/T 6109.15-2008: Enamelled round winding wire -- Part 15: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Enamelled round winding wire Part 15. Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer ICS 29.060.01 K12 National Standards of People's Republic of China GB/T 6109.15-2008/IEC 60317-2.2000 Replacing GB/T 6109.9-1989 Enamelled round winding wires Part 15. 130 self-adhesive straight welding Polyurethane enameled copper wire (IEC 60317-2.2000, Specificationsforparticulartypesofwindingwires- Part 2. Solderablepolyurethaneenameledroundcopperwire, class130, withabondinglayer, IDT) Posted 2008-12-01 2008-04-23 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Definitions, test methods and appearance General 1 Size 4 1 5 Resistance 1 Elongation 1 6 2 7 resilience 8 flexibility and adhesion 2 9 Thermal Shock 2 10 Softening 2 11 scratch (conductor nominal diameter 0.250mm and 2.000mm above and below) 2 12 Solvent 2 13 Breakdown Voltage 3 14 film continuity 3 15 Temperature index 3 16 anti-freezing agent 3 17 solderable 3 18 thermal bonding 3 19 4 dielectric loss factor 20 transformer oil resistant 4 21 4 Loss 23 pinhole test 5 30 Package 5 GB/T 6109.15-2008/IEC 60317-2.2000

Foreword

GB/T 6109 "enamelled round winding wires" is divided into 22 parts. --- Part 1. General requirements; --- Part 2. 155 polyester enamelled round copper wire; --- Part 3. 120 acetal enamelled round copper wire; --- Part 4. 130 solderable polyurethane enamelled round copper wire; --- Part 5. 180 polyester enamelled round copper wire; --- Part 6. 220 Polyimide enamelled round copper wire; Part --- Article 7. 130L grade polyester enamelled round copper wire; --- Part 9. 130 polyamide composite solderable polyurethane enamelled round copper wire; --- Part 10. 155 solderable polyurethane enamelled round copper wire; --- Part 11. 155 polyamide composite solderable polyurethane enamelled round copper wire; --- Part 12. 180 polyester or polyamide, polyester enamelled round copper wire; --- Part 13. 180 solderable polyester-imide enamelled round copper wire; --- Part 14. Polyamide-imide 200 enamelled round copper wire; --- Part 15. 130 self-adhesive straight welding polyurethane enamelled round copper wire; --- Part 16. 155 self-adhesive straight welding polyurethane enamelled round copper wire; --- Part 17. 180 self-adhesive Solderable polyesterimide enamelled round copper wire; --- Part 18. 180 self-adhesive polyester enamelled round copper wire; --- Part 19.200 self-adhesive polyester or polyester-polyamide-imide enamelled round copper wire; --- Part 20.200 polyester or polyester-polyamide imide enamelled round copper wire; --- Part 21.200 Polyester - amide - imide enamelled round copper wire; --- Part 22. 240 aromatic polyimide enamelled round copper wire; --- Part 23. 180 straight welding polyurethane enamelled round copper wire. This is Part 15 GB/T 6109's. This section identical with IEC 60317-2.2000 "winding wires products Standard - Part 2. 130 self-adhesive straight welding polyurethane enamelled round copper wire, "Version 3.2 (in English). For ease of use, this section made the following editorial changes. --- Deleted international standards foreword; "." --- With a decimal point instead of a comma as the decimal point, ""; --- According to IEC 60317-0-1.2005 increases the pinhole pilot projects; --- Canceled solvent bonding and the provisions of resolution. Since the implementation of this section instead of GB/T 6109.9-1989. Section compared with the GB/T 6109.9-1989, major changes in the following. --- Conductor nominal diameter range (1B and 2B grade level) are extended to 0.02mm ~ 2.00mm; --- Clear product temperature index 130; --- Thermal shock temperature increased from 125 ℃ to 155 ℃, winding times the diameter of the conductor according to the original nominal diameter range binning to press each conductor Nominal diameter of the project; --- Increased scratch resistance, high temperature breakdown voltage, continuity and performance requirements of the film temperature index; --- Solder time from 15s/mm and 20s/mm (1B and 2B grade level), respectively, to the 12s/mm and 16s/mm, the shortest welding GB/T 6109.15-2008/IEC 60317-2.2000 Tin time from 3s to 2s; --- In addition to thermal bonding test vertical spiral coil binding force to the provisions of the original assessment, the new twisted coil bond strength performance Assessment; --- Increasing the pinhole pilot projects. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee Wire and Cable (SAC/TC213) centralized. This part of the unit responsible for drafting. Shanghai Electric Cable Research Institute. Participated in the drafting of this section. Rong Sheng AMD Wire Co., Donggang Wire Factory, Guangzhou Wanbao Limited enameled wire, Shandong Dorset electrician Material Co., Ltd., Chengdu Guoguang Electric Co., Ltd. Zhongshan Prudential enameled wood. The main drafters of this section. Liu Guizhong, Xueyong Bin, Qi state level, and the military, Huqing section, Yan Lei Jie, Chen Hui-min. This part of the standard replaces the previous editions are. --- GB/T 6109.9-1989. GB/T 6109.15-2008/IEC 60317-2.2000 Enamelled round winding wires Part 15. 130 self-adhesive straight welding Polyurethane enameled copper wire

1 Scope

GB/T 6109 This section provides the 130 paint double self-adhesive straight welding enameled copper round wire requirements. Polyurethane resin in the paint As the base, if the chemical characteristics of the original can retain the resin and satisfy all the requirements specified in the wire, the resin may be modified. Topcoat layer Thermoplastic resin as a self-bonding layer group. NOTE. chemically-modified resin is a variation of, or contain one or more additives to improve certain properties of the resin or its usage characteristics. 130 represents the thermal level, which requires a minimum temperature index of 130, a heat shock temperature of at least 155 ℃. Corresponding to the temperature index temperature in Celsius is not recommended wire temperature, because it depends on the type of equipment used include Many factors within. Conductor nominal diameter range specified in this standard are. --- 1B Level. 0.020mm and 2.000mm above and below; --- 2B Grade. 0.020mm and 2.000mm above and below. Nominal press GB/T 6109.1-2008 prescribed in Chapter 4, the diameter of the conductor.

2 Normative references

The following documents contain provisions which, through reference to GB/T 6109 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. Part 1 GB/T 6109.1-2008 enamelled round winding wire. General requirements (IEC 60317-0-1.2005, IDT) 3 Definitions, test methods and General Appearance 3.1 Definitions, test methods - General Definitions, test methods, see General GB/T 6109.1-2008 Chapter 3. If GB/T 6109.1-2008 in this section are contradictory to this section shall prevail. 3.2 Appearance See GB/T 6109.1-2008 in 3.3.

4 Dimensions

See GB/T 6109.1-2008 in Chapter 4.

5 resistance

See GB/T 6109.1-2008 in Chapter 5.

6 Elongation

See GB/T 6109.1-2008 in Chapter 6. GB/T 6109.15-2008/IEC 60317-2.2000 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6109.15-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6109.15-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6109.15-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6109.15-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.