GB/T 6120-2012 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6120-2012: Metal slitting saw
Status: Valid

GB/T 6120: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6120-2012	259	Add to Cart	3 days	Metal slitting saw	Valid
GB/T 6120-1996	319	Add to Cart	3 days	Metal slitting saws--Types and dimensions	Obsolete
GB 6120-1985	199	Add to Cart	2 days	Metal slotting saws with medium teeth	Obsolete

Similar standards

GB/T 33524.2   GB/T 972   GB/T 5104   GB/T 6122   GB/T 6119   GB/T 6117.1   

Basic data

Standard ID: GB/T 6120-2012 (GB/T6120-2012)
Description (Translated English): Metal slitting saw
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J41
Classification of International Standard: 25.100.20
Word Count Estimation: 11,149
Older Standard (superseded by this standard): GB/T 6120-1996; GB/T 6121-1996
Quoted Standard: GB/T 6132
Adopted Standard: ISO 2296-2011, MOD
Regulation (derived from): Announcement of Newly Approved National Standards No. 1 of 2012
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard provides a fine-tooth, medium and coarse tooth saw blade cutter tooth types and sizes, materials and hardness, appearance and surface roughness, marking and packaging and other basic requirements. This standard applies to diameter 20mm ~ 315

GB/T 6120-2012: Metal slitting saw

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS25.100.20 J41 National Standards of People's Republic of China Replacing GB/T 6120-1996 GB/T 6121-1996 Blade cutter (ISO 2296.2011, Metalslittingsawswithfineandcoarseteeth- Metricseries, MOD) Issued on. 2012-07-01 2012-03-09 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard rule according to GB/T 1.1-2009 given draft. This standard replaces GB/T 6120-1996 "blade cutter type and size" and GB/T 6121-1996 "blade cutter technology condition". This standard and GB/T 6120-1996 and GB/T 6121-1996 compared to the main changes are as follows. --- Modify the scope; --- Modify the normative references; --- Revised GB/T 6120-1996 Table 1, Table 2 and Table 3 of the note; --- 4.1 holes should be made within the scope of the d keyway by d≥125mm to d≥110mm; --- Revised GB/T 6121-1996 Notes to Table 4; --- Remove the performance test. This standard uses redrafted law revision adopted ISO 2296.2011 "metal with a fine tooth blade cutter and coarse teeth - Metric series" (in English). This standard and ISO 2296.2011 the following modifications have compared differences in editorial and technical terms related to these differences have been adopted in its Outer margin position of a single vertical line (︱) were marked. --- Deleted international standards foreword, preface increased our standards; --- Modify the scope; --- The international standard to this standard; --- Normative references to international standards in the use of alternative national standards; --- Increasing the symbol explanation; --- The coarse tooth blade cutter type size to tooth blade cutter, added a new coarse tooth blade cutter type size; --- D hole should be made out of the range of keyway by d≥125mm to d≥110mm; --- Increase the marked sample; --- Increase the technical conditions; --- Revised Appendix A method for determining the number of teeth of the saw blade cutter; --- Increased detection method B blade cutter runout appendix. The standard proposed by China Machinery Industry Federation. This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized. This standard is drafted by. Chengdu Tool Research Institute Co., Ltd, Wenling west of the cutting tool Technology Service Centre Limited. The main drafters of this standard. Yu Zeng ring, a new source. This standard replaces the standards previously issued as follows. --- GB/T 1120-1985, GB/T 1121-1985, GB/T 6120-1985, GB/T 6120-1996, GB/T 6121-1985, GB/T 6121-1996. Blade cutter

1 Scope

This standard specifies the fine teeth, tooth and coarse tooth blade cutter types and dimensions, material and hardness, appearance and surface roughness, logos and packages Equipment and other basic requirements. This standard applies to a diameter of 20mm ~ 315mm metal cutting blade cutter.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 6132 cutters and cutter arbor swap Size (GB/T 6132-2006, ISO 240.1994, IDT)

3 Symbol

d --- cutter blade outer diameter; D --- cutter blade bore diameter; d1 --- cutter blade axis table diameter; L --- cutter blade thickness.

4 type and size

4.1 blade cutter types and dimensions according to Figure 1 and Table 1, Table 2, Table 3 provisions. D≥110mm, and when L≥3mm, the hole should be prepared Determination of the keyway, keyway size according to the provisions of GB/T 6132's. Blade cutter tooth number, see Appendix A. figure 1 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6120-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6120-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6120-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6120-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6120-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6120-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.