GB/T 6124-2007 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6124-2007: T-slot cutters -- Types and sizes
Status: Valid

GB/T 6124: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6124-2007	159	Add to Cart	3 days	T-slot cutters -- Types and sizes	Valid
GB/T 6124.1-1996	199	Add to Cart	2 days	T-slot cutters. Part 1: Dimensions of T-slot cutters with plain or flated parallel shanks	Obsolete
GB 6124-1985	199	Add to Cart	2 days	T-slot cutter with flatted parallel shank	Obsolete

Similar standards

GB/T 33524.2   GB/T 972   GB/T 5104   GB/T 6132   GB/T 6122   GB/T 6124.7   

Basic data

Standard ID: GB/T 6124-2007 (GB/T6124-2007)
Description (Translated English): T-slot cutters -- Types and sizes
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J41
Classification of International Standard: 25.100.20
Word Count Estimation: 6,623
Date of Issue: 2007-07-26
Date of Implementation: 2007-12-01
Older Standard (superseded by this standard): GB/T 6124.1-1996; GB/T 6124.2-1996
Adopted Standard: ISO 3337-2000, MOD
Regulation (derived from): China National Standard Announcement 2007 No.7 (Total No.107) - National-Standard-Commission
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the general or flatted shank T -slot cutters, threaded shank T -slot cutters and Morse taper shank T -slot cutters with threaded hole types and sizes. This standard applies to T -slot width processing GB/T l58 provisions of 5 mm ~ 54 mm T-slot milling.

GB/T 6124-2007: T-slot cutters -- Types and sizes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
T-slot cutters. Types and sizes ICS 25.100.20 J41 National Standards of People's Republic of China Replacing GB/T 6124.1-1996, GB/T 6124.2-1996 T-slot cutter type and size (ISO 3337.2000, T-slotcutterswithcylindricalshanksandwithMorse tapershankshavingtappedhole, MOD) Posted 2007-07-26 2007-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ISO 3337.2000 "straight shank and Morse taper shank T - slot cutters" (in English). This standard is based on ISO 3337.2000 re-drafted. This standard and ISO 3337.2000 have compared these differences. --- Deleted international standards foreword, preface increased; --- "This International Standard" by "this standard"; --- Normative references to international standards in the use of alternative national standards; --- Standard name "straight shank and Morse taper shank T - slot cutters" to "T-slot cutter type and size"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Increase the marked examples. This standard replaces GB/T 6124.1-1996 "T-slot cutters - Part 1. T-slot milling cutter straight shank types and dimensions" and GB/T 6124.2-1996 "T-slot cutters - Part 2. Morse taper shank T - slot cutters types and dimensions." This standard and GB /major changes and GB/T 6124.2-1996 compared to T 6124.1-1996 are as follows. --- Two parts into one standard; --- Modify the normative references; --- Delete symbolic description; --- Dimension sign change; --- Increasing the threaded shank T - slot cutters. The standard proposed by China Machinery Industry Federation. This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized. This standard was drafted. Chengdu Tool Institute. The main drafters of this standard. Yu Zeng ring, check States soldiers, Fan Yingjie. This standard replaces the standards previously issued as follows. --- GB 6123-85, GB 6124-85, GB/T 6124.1-1996; --- GB 1126-85, GB/T 6124.2-1996. T-slot cutter type and size

1 Scope

This standard specifies the general or flatted straight shank T - slot cutters, T-slot milling cutter threaded shank and threaded holes with Morse taper shank T - slot cutters The type and size. This standard applies to the processing GB/T -slot width specified for the T 158 T-slot milling cutter of 5mm ~ 54mm.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 158 machine table T-slots and corresponding bolts (GB/T 158-1996, eqv ISO 299. 1987) GB/T 1443 from machine tools and tool handles with clip cone (GB/T 1443-1996, eqv ISO 296.1991) GB/T 6131.1 cutter straight shank - Part 1. General straight shank type and size (GB/T 6131.1-2006, ISO 3338-1. 1996, IDT) GB/T 6131.2 cutter straight shank - Part 2. flatted straight shank type and size (GB/T 6131.2-2006, ISO 3338-2. 2000, IDT) GB/T 6131.4 cutter straight shank - Part 4. threaded shank type and size (GB/T 6131.4-2006, ISO 3338-3. 1996, IDT)

3 type and size

3.1 ordinary straight shank, straight shank and threaded shank Weldon T-slot milling cutter Types and dimensions shown in Figure 1 and Table 1. Ordinary straight shank, Weldon shank straight shank and threaded shank - Dimensions and tolerances are according to GB/T 6131.1, GB/T 6131.2 and GB/T 6131.4 of the provisions. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6124-2007_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6124-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6124-2007_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6124-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6124-2007?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6124-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.