GB/T 6125-2007 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6125-2007: T-slot cutters -- Technical specifications
Status: Valid

GB/T 6125: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6125-2007	159	Add to Cart	3 days	T-slot cutters -- Technical specifications	Valid
GB/T 6125-1996	279	Add to Cart	3 days	T-slot cutters--Technical specifications	Obsolete
GB 6125-1985	199	Add to Cart	2 days	T-slot cutters technical specifications	Obsolete

Similar standards

GB/T 33524.2   GB/T 972   GB/T 5104   GB/T 6132   GB/T 6122   GB/T 6119   

Basic data

Standard ID: GB/T 6125-2007 (GB/T6125-2007)
Description (Translated English): T-slot cutters -- Technical specifications
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J41
Classification of International Standard: 25.100.20
Word Count Estimation: 6,69
Date of Issue: 2007-07-26
Date of Implementation: 2007-12-01
Older Standard (superseded by this standard): GB/T 6125-1996
Regulation (derived from): China National Standard Announcement 2007 No.7 (Total No.107) - National-Standard-Commission
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the position tolerances T -slot milling, material and hardness, appearance and surface roughness, logo and packaging technology requirements. This standard applies by GB/T 6124 production of T -slot milling. According to the agreement between the other T -slot cutters can also refer to the use.

GB/T 6125-2007: T-slot cutters -- Technical specifications

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
T-slot cutters. Technical specifications ICS 25.100.20 J41 National Standards of People's Republic of China Replacing GB/T 6125-1996 T-slot cutters - Technical specifications Posted 2007-07-26 2007-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 6125-1996 "T-slot cutters technical conditions." This standard and GB/T 6125-1996 compared to the main changes are as follows. --- Modify the normative references; --- Remove the performance test; --- Deleted Symbol Description. Appendix A of this standard is a normative appendix. The standard proposed by China Machinery Industry Federation. This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized. This standard was drafted. Chengdu Tool Institute. The main drafters of this standard. Yu Zeng ring, check States soldiers, Fan Yingjie. This standard replaces the standards previously issued as follows. --- GB 6125-85, GB/T 6125-1996. T-slot cutters - Technical specifications

1 Scope

This standard specifies the position tolerance T-slot cutters, materials and hardness, appearance and surface roughness, marking and packaging of technical requirements. This standard applies to press GB/T 6124 production of T-slot milling cutter. According to the agreement between the other T-slot milling cutter can also refer use.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 6124 T-slot cutter type and size (GB/T 6124-2007, ISO 3337.2000, MOD)

3 position tolerances

Position tolerances according to Table 1. Table 1 millimeters Tolerance Project Radial circumferential edge of the shank axis runout A turn 0.05 Adjacent teeth 0.03 End edge of the end face of the round shank axis runout A turn 0.05 Adjacent teeth 0.03 NOTE. runout detection T-slot milling cutter shown in Appendix A.

4 material and hardness

4.1 Material T-slot cutter high speed steel with W6Mo5Cr4V2 or equivalent. 4.2 Hardness T-slot cutter working part. 63HRC ~ 66HRC. T-slot milling shank. straight shank and taper shank general, not less than 30HRC; Flatted straight shank, not less than 50HRC; Threaded shank, not less than 30HRC.

5 appearance and surface roughness

5.1 T-slot cutter surface should not have cracks, sharp cutting edges should be, there should be no chipping, grinding and annealing blunt the impact of the lack of performance trap. Welding cutter in the weld may not have sand holes and incomplete penetration phenomenon. 5.2 T-slot milling cutter according to the upper limit of the surface roughness of the following provisions. --- Front and rear. Rz6.3μm; --- Ordinary straight shank cylindrical shank. Ra1.25μm; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6125-2007_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6125-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6125-2007_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6125-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6125-2007?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6125-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.