GB/T 26945-2023 English PDFUS$349.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 26945-2023: Empty container handler Status: Valid GB/T 26945: Historical versions
Basic dataStandard ID: GB/T 26945-2023 (GB/T26945-2023)Description (Translated English): Empty container handler Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J83 Classification of International Standard: 53.060 Word Count Estimation: 18,126 Date of Issue: 2023-09-07 Date of Implementation: 2024-04-01 Older Standard (superseded by this standard): GB/T 26945-2011 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 26945-2023: Empty container handler---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 53.060 CCSJ83 National Standards of People's Republic of China Replace GB/T 26945-2011 Container empty container stacker Published on 2023-09-07 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPreface III 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 Type 2 5 Technical requirements 2 5.1 Environmental working conditions 2 5.2 Basic requirements 2 5.3 Strength 5 5.4 Usage performance 5 5.5 Safety requirements 5 6 Test method 7 6.1 Visual inspection 7 6.2 Determination of main structural dimensional parameters 7 6.3 Determination of main technical performance parameters 7 6.4 Stability test 7 6.5 Electrical control system test 7 6.6 Paint film adhesion test 7 6.7 Overload test 7 6.8 Steering performance test 7 6.9 Braking performance test 7 6.10 Industrial Test 7 6.11 Thermal equilibrium test 8 6.12 Noise test 8 6.13 Unbalanced load test 8 6.14 Personnel protection against electric shock test 8 6.15 Determination of the natural sliding amount of the spreader and the natural change of the mast inclination angle 8 6.16 Determination of lowering speed of spreader 8 6.17 Safety monitoring and management system inspection 8 6.18 Energy consumption test 8 7 Inspection Rules 8 7.1 Factory inspection 8 7.2 Type inspection 8 8 Marking, packaging, transportation and storage10 8.1 Logo 10 8.2 Packaging10 8.3 Transport and storage11ForewordThis document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 26945-2011 "Container Empty Container Handlers". Compared with GB/T 26945-2011, except for structural adjustments and In addition to editorial changes, the main technical changes are as follows. a) Changed the scope of application (see Chapter 1, Chapter 1 of the.2011 edition); b) Added the type of empty container stacker (see Chapter 4); c) Environmental working conditions have been changed (see 5.1, 3.1.3~3.1.5 of the.2011 edition); d) Changed the manufacturing requirements for main structural dimensions (see Table 1, Table 1 of the.2011 edition); e) Changed the stability requirements (see 5.2.3, 3.1.6 of the.2011 version); f) The size requirements for spreaders have been changed (see 5.2.5, 3.1.9 of the.2011 edition); g) The requirements for electrical control systems, signals and lighting devices have been changed (see 5.2.7, 5.2.8, 3.1.11 of the.2011 edition); h) The requirements for paint film adhesion have been changed (see 5.2.10, 3.1.12 of the.2011 edition); i) Changed the requirements for hydraulic oil cleanliness (see 5.2.11, 3.1.13 of the.2011 edition); j) Changed the industrial test requirements (see 5.4.4, 3.3.3 of the.2011 edition); k) Added relevant requirements for thermal balance test of electric empty container handlers and extended-range hybrid empty container handlers (see 5.4.6); l) Changed safety requirements (see 5.5.1, 3.4.1 of the.2011 version); m) Added requirements for personnel protection against electric shock (see 5.5.2); n) Added startup requirements for electric empty container handlers and extended-range hybrid empty container handlers (see 5.5.5); o) Added operating requirements for electric empty container handlers and extended-range hybrid empty container handlers (see 5.5.6); p) Added requirements for noise levels at the operator’s position of electric container empty container forklifts (see 5.5.9); q) Added the requirements for the lowering speed of the spreader (see 5.5.24); r) Added requirements for the locking mechanism of the rechargeable energy storage system (REESS) (see 5.5.25); s) Added requirements for insulation status warning devices for Class B voltage circuits (see 5.5.26); t) Added requirements for wires for Class B voltage circuits (see 5.5.27); u) Added requirements for safety signs for Class B voltage circuits (see 5.5.28); v) Added emergency decentralization functional requirements (see 5.5.29); w) Added requirements for safety monitoring and management systems (see 5.5.31); x) Increased energy consumption requirements (see 5.5.32); y) Added visual inspection (see 6.1); z) Added measurement of main structural size parameters (see 6.2); aa) Added measurement of main technical performance parameters (see 6.3); bb) Changed the stability test method (see 6.4, 4.1 of the.2011 edition); cc) Added electrical control system test (see 6.5); dd) Added paint film adhesion test (see 6.6); ee) Added overload test (see 6.7); ff) Added steering performance test (see 6.8); gg) Added industrial test (see 6.10); hh) Changed the thermal balance test (see 6.11, 4.3 of the.2011 edition); i) Added noise test (see 6.12); j) Added personal electric shock protection test (see 6.14); kk) Added the measurement of the natural sliding amount of the spreader and the natural change of the mast inclination angle (see 6.15); l) Added spreader descending speed measurement (see 6.16); mm) Added inspection of safety monitoring and management system (see 6.17); nn) Added energy consumption test (see 6.18). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Industrial Vehicle Standardization Technical Committee (SAC/TC332). This document was drafted by. Anhui Heli Co., Ltd., Beijing Hoisting and Transportation Machinery Design and Research Institute Co., Ltd., Hangcha Group Co., Ltd. Co., Ltd., Beijing Ke Zhengping Engineering Technology Inspection Research Institute Co., Ltd., Liuzhou Liugong Forklift Co., Ltd., and Konecranes Port Machinery (Shanghai) have Co., Ltd., Nanjing Institute of Technology, Xuzhou XCMG Port Machinery Co., Ltd., Cargotec Industrial (China) Co., Ltd., Tangshan Shenghang Environmentally Friendly Locomotives Manufacturing Co., Ltd. The main drafters of this document. Zhang Hongkai, Zhang Jinxia, Yang Xinlei, Zhao Chunhui, Liu Daqing, Qi Daman, Liu Qingrong, Lu Yao, Zhu Changjian, Zhang Haijun, Liu Yuting, Wang Neng. This document was first published in.2011 and this is the first revision. Container empty container stacker1 ScopeThis document specifies the type, technical requirements, test methods, inspection rules, marking, packaging, transportation and Storage. This document applies to the manufacture of empty container handlers, including internal combustion empty container handlers, electric container empty container handlers and Extended range hybrid empty container handler. The manufacturing of other types of empty container lifters shall be carried out with reference.2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 1413 Series 1 Container Classification, Dimensions and Rated Mass GB 4785 Regulations for the installation of exterior lighting and light signaling devices on automobiles and trailers GB/T 7593 Symbols for driver control devices and other display devices of motorized industrial vehicles GB/T 9286-2021 Cross-hatch test for paints and varnishes GB/T 10827.1 Industrial vehicle safety requirements and verification Part 1.Self-propelled industrial vehicles (except unmanned vehicles, telescopic Forklifts and trucks) GB/T 13306 Signage GB/T 14039-2002 Hydraulic transmission oil solid particle pollution level code GB 18384 Safety requirements for electric vehicles GB/T 18849 Brake performance and parts strength of motorized industrial vehicles GB/T 26560 General rules for safety signs and hazard pictorial representations of motorized industrial vehicles GB/T 26949.9 Industrial vehicle stability verification Part 9.Counterbalance weight for handling freight containers with a length of 6m and above Forklift GB/T 27544 Electrical requirements for industrial vehicles GB/T 27693 Measurement method for safety noise radiation of industrial vehicles GB/T 28591-2012 Wind power level GB/T 38893 Industrial vehicle safety monitoring and management system JB/T 3300 Test method for complete counterbalanced forklift truck ISO 23308-3 Industrial vehicle energy efficiency test method Part 3.Container truck (Energyefficiencyof3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 An energy storage system that is rechargeable and can provide electrical energy. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26945-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 26945-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 26945-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26945-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 26945-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 26945-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
