GB/T 26949.1-2020 PDF EnglishUS$170.00 · In stock · Download in 9 seconds
GB/T 26949.1-2020: Industrial trucks - Verification of stability - Part 1: General Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 26949.1: Historical versions
Similar standardsGB/T 26949.1-2020: Industrial trucks - Verification of stability - Part 1: General---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT26949.1-2020GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 53.060 J 83 GB/T 26949.1-2020 / ISO 22915-1:2016 Replacing GB/T 26949.1-2012 Industrial trucks - Verification of stability - Part 1: General (ISO 22915-1:2016, IDT) ISSUED ON: NOVEMBER 19, 2020 IMPLEMENTED ON: JUNE 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 6 2 Normative references ... 7 3 Terms and definitions ... 7 4 Truck stability tests ... 10 References ... 15ForewordThe following parts have been released or are to be released for GB/T 26949, “Industrial trucks - Verification of stability”: -- Part 1: General; -- Part 2: Counterbalanced trucks with mast; -- Part 3: Reach and straddle trucks; -- Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height; -- Part 5: Single-side-loading trucks; -- Part 7: Bidirectional and multidirectional trucks; -- Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated; -- Part 9: Counterbalanced trucks with mast handling freight containers of 6 m length and longer; -- Part 10: Additional stability tests for trucks operating in the special conditions of stacking with load laterally displaced by powered devices; -- Part 11: Industrial variable-reach trucks; -- Part 12: Industrial variable-reach trucks with mast handling freight containers of 6 m length and longer; -- Part 13: Rough-terrain trucks with mast; -- Part 14: Rough-terrain variable-reach trucks; -- Part 15: Counterbalanced trucks with articulated steering; -- Part 16: Pedestrian-propelled trucks; -- Part 17: Burden and personnel carriers; -- Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization; -- Part 21: Order-picking trucks with operator position elevating above 1200 mm; -- Part 22: Lateral-and front-stacking trucks with and without elevating operator position; -- Part 23: Truck-mounted forklift; -- Part 24: Rough-terrain rotary variable-reach trucks. This Part is Part 1 of GB/T 26949. This Part was drafted in accordance with the rules given in GB/T 1.1-2009. This Part replaces GB/T 26949.1-2012, “Industrial trucks - Verification of stability - Part 1: General”; compared with GB/T 26949.1-2012, the main technical changes are as follows: -- Delete “cargo and personnel vehicles” (see Chapter 1 of version 2012); -- Modify “normative references” (see Chapter 2; Chapter 2 of version 2012); -- Add “(3.1, 3.2)” (see 3.3); -- Add notes (see 3.4, 3.5); -- Modify the expression of maintaining the initial position of the truck on the tilt table (see 4.3.2; 4.3.2 of version 2012). The translation method that is used in this Part is equivalent to ISO 22915- 1:2016 “Industrial trucks - Verification of stability - Part 1: General”. The documents of our country that have a consistent correspondence with the international documents that are referenced in this Part are as follows: -- GB/T 6104.1-2018, Industrial trucks - Terminology and classification - Part 1: Types of industrial trucks (ISO 5053-1:2015, IDT) -- GB/T 8591-2000, Earth-moving machinery - Seat index point (eqv ISO 5353:1995) -- GB/T 8420-2011, Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007, IDT) This Part was proposed by China Machinery Industry Federation. This Part shall be under the jurisdiction of National Technical Committee of Industrial Trucks (SAC/TC 332). The drafting organizations of this Part: Hangcha Group Co., Ltd., Beijing Materials Handling Research Institute, Anhui Heli Co., Ltd., Noblelift Intelligent Equipment Co., Ltd., Ruyi Joint Stock Co. Ltd., Longhe Intelligent Equipment Industrial trucks - Verification of stability - Part 1: General1 ScopeThis Part of GB/T 26949 specifies the stability that is related to the safety of industrial trucks which are defined by ISO 5053-1, and the verification methods. The industrial trucks which are involved in this Part refer to self-propelled or pedestrian-propelled trucks with wheels, except for trucks running on tracks. These trucks can be controlled by the operator, or unmanned, which are used for handling, towing, pushing, lifting, stacking or layer stacking in the shelf. This Part specifies the basic test specifications and requirements for the verification of stability of industrial trucks (hereinafter referred to as “trucks”). This Part applies to the following truck types and their specific conditions: a) Counterbalanced trucks with mast which are specified in ISO 22915-2; b) Reach and straddle trucks which are specified in ISO 22915-3; c) Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height, which are specified in ISO 22915-4; d) Single-side-loading trucks which are specified in ISO 22915-5; e) Bidirectional and multidirectional trucks which are specified in ISO 22915- 7; f) Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated, which are specified in ISO 22915-8; g) Counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer, which are specified in ISO 22915-9; h) Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices, which are specified in ISO 22915-10; i) Industrial variable-reach trucks, which are specified in ISO 22915-11; < Trucks other than variable-reach and rough-terrain trucks> meet the following operating conditions: a) The fork is basically level; the stacking operation is carried out on a solid, smooth, level and paved road; b) Perform the operation when the load centroid is approximately in the longitudinal median plane of the truck; c) The mast or fork is tilted backward (if possible); the load is in a low (operating) position; it operates on a solid, smooth, level and paved road; for forward-moving trucks, the mast or fork is completely retracted back; d) The load/operator is running or operating in the lifting state (the truck is specially designed for this operating condition). 3.2 Normal operating conditions < Variable-reach and rough-terrain trucks> meet the following operating conditions: a) Perform the stacking operation on a solid, smooth, level and paved road under the combined state when the cantilever crane lifts/extends and fork is basically level; b) Perform the operation when the load centroid is approximately in the longitudinal median plane of the truck; c) For trucks with mast, operate the load in the lifting state when the mast is tilted back not more than 10° and the load centroid is not more than 600 mm backward; d) Operate the load in the lifting state when the fork is tilted backward; e) The mast or fork of the rough-terrain truck is tilted backward, and the load is in a low (operating) position; it runs on an unleveled ground or a damaged surface; if possible, any forward/telescoping mechanism shall be completely retracted back. 3.3 Operating conditions other than normal When the operating conditions are different from those specified in 3.1 or 3.2, the truck shall meet one of the following conditions: a) Different specific conditions that are stipulated by relevant applicable standards (such as trucks operating in the special conditions of stacking with load laterally displaced by powered devices or offset load, offset by ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 26949.1-2020 be delivered?Answer: The full copy PDF of English version of GB/T 26949.1-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 26949.1-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26949.1-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 26949.1-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 26949.1-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 26949.1-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 26949.1-2020?A step-by-step guide to download PDF of GB/T 26949.1-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 26949.1-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
