|
US$689.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
YC/T 587-2020: Comprehensive evaluation method for manufacturing level of cigarette factory
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YC/T 587-2020 | English | 689 |
Add to Cart
|
6 days [Need to translate]
|
Comprehensive evaluation method for manufacturing level of cigarette factory
| Valid |
YC/T 587-2020
|
PDF similar to YC/T 587-2020
Basic data | Standard ID | YC/T 587-2020 (YC/T587-2020) | | Description (Translated English) | Comprehensive evaluation method for manufacturing level of cigarette factory | | Sector / Industry | Tobacco Industry Standard (Recommended) | | Classification of Chinese Standard | X85 | | Classification of International Standard | 65.160 | | Word Count Estimation | 30,385 | | Date of Issue | 2020-05-22 | | Date of Implementation | 2020-12-01 | | Issuing agency(ies) | State Tobacco Monopoly Administration | YC/T 587-2020: Comprehensive evaluation method for manufacturing level of cigarette factory---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Comprehensive evaluation method for manufacturing level of cigarette factory
ICS 65.160
X85
People's Republic of China Tobacco Industry Standard
Comprehensive evaluation method for the production level of cigarette factories
2020-05-22 released
2020-12-01 implementation
Issued by the State Tobacco Monopoly Administration
Table of contents
Preface Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Comprehensive evaluation index system 1
4.1 Process quality level 1
4.2 Production efficiency level 4
4.3 Safety, health, environmental protection and clean production level 5
4.4 Intelligent manufacturing level 6
5 Data collection and processing 6
5.1 Acquisition 6
5.2 Treatment 7
6 Evaluation of manufacturing level 7
6.1 Evaluation of final indicators 7
6.2 Comprehensive evaluation 8
6.3 Level evaluation 8
7 Continuous improvement 8
Appendix A (informative appendix) Example of missing data processing method 10
Appendix B (Normative Appendix) Calculation caliber and limit of quantitative index 11
Appendix C (Normative Appendix) Qualitative Index Scoring Rules 21
References 25
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the State Tobacco Monopoly Administration.
This standard is under the jurisdiction of the National Tobacco Standardization Technical Committee Enterprise Standardization Subcommittee (SAC/TC144/SC4).
Drafting organizations of this standard. Zhejiang China Tobacco Industry Co., Ltd., Zhengzhou Tobacco Research Institute of China National Tobacco Corporation, Shanghai Tobacco Group
Limited Liability Company, China Tobacco Hubei Industry Co., Ltd., China Tobacco Jiangsu Industry Co., Ltd., China Tobacco Sichuan Industry Co., Ltd., Zheng
Zhou Yisheng Tobacco Engineering Design Consulting Co., Ltd.
The main drafters of this standard. Jian Wei, Tao Zhilin, Zhang Qingsong, Gao Xuefeng, Mao Yongwei, Zhang Zhantao, Wang Wenjuan, Qian Jie, Lin Yizhen, Xu Yuangen,
Hu Xiaohu, Shen Hongjie, Yang Shizheng, Tao Tito, Huang Qilu, Zhang Qidong, Qian Zhaojun, Chen Wei, Xu Ruyan, Hao Xiliang, Zhang Hongzhao, Wen Ruoyu, Wenwu,
Wang Yingli, Zheng Fei, Hu Yu, Lai Lin, Zheng Qian.
Introduction
In order to comprehensively evaluate the production and manufacturing level of cigarette factories, establish a comprehensive, systematic and scientific evaluation method to guide cigarette factories
In the manufacturing process, the horizontal benchmarking between the factories and the vertical comparison within the factories are carried out, and the shortcomings that affect the production level are found, and the weaknesses are found
And carry out targeted improvements and improvements to enable cigarette factories to continuously improve the level of "lean production" and "intelligent manufacturing", and to promote cigarette factories
For high-quality development, this standard is formulated.
Comprehensive evaluation method for the production level of cigarette factories
1 Scope
This standard specifies the index system and evaluation method for the comprehensive evaluation of the manufacturing level of cigarette factories.
This standard applies to the comprehensive evaluation of the manufacturing level of cigarette factories.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB 12348 Environmental Noise Emission Standard at the Boundary of Industrial Enterprises
GB/T 19609 Smoking machine for routine analysis of cigarettes for determination of total particulate matter and tar
GB.20052 Three-phase distribution transformer energy efficiency limit value and energy efficiency grade
GB/T 22838 (all parts) Determination of physical properties of cigarettes and filter rods
GB/T 23355 Determination of nicotine in the total particulate phase of cigarettes by gas chromatography
GB/T 23356 Determination of carbon monoxide in the gas phase of cigarette smoke Non-scattering infrared method
YC/T 152 Determination of Filling Value of Cut Tobacco
YC/T 163 Determination of Filling Value of Expanded Cigarette Stem
YC/T 178 Determination of the whole rate and the rate of shredded tobacco
YC/T 199 Evaluation Criteria for Cleaner Production of Cigarette Enterprises
YC/T 579 Cigarette Industrial Enterprise Equipment Management Performance Evaluation Method
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Very poor target weight
When cigarettes of the same brand are produced by multiple sets of cigarette making machines of the same model, the difference between the maximum and minimum measured value of the target weight of the cigaretteless cigarettes between the machines.
3.2
Wire consumption deviation rate
The degree of deviation between the total amount of pure shredded tobacco in a batch of qualified finished cigarettes and the total amount of shredded tobacco input.
4 Comprehensive evaluation index system
4.1 Process quality level
The process quality level evaluation index system and index weights are shown in Table 1.
|