SN/T 1794.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 1794.2-2015 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Rules for inspection of electrical accessories for import and export - Part 2: Cord sets and interconnection cord sets
| Obsolete |
SN/T 1794.2-2015
|
| SN/T 1794.2-2006 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Import and export of electrical accessories inspection procedures - Part 2: wire components
| Obsolete |
SN/T 1794.2-2006
|
PDF similar to SN/T 1794.2-2015
Basic data | Standard ID | SN/T 1794.2-2015 (SN/T1794.2-2015) | | Description (Translated English) | Rules for inspection of electrical accessories for import and export - Part 2: Cord sets and interconnection cord sets | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | K30 | | Classification of International Standard | 29.060.10 | | Word Count Estimation | 9,941 | | Date of Issue | 2015-02-09 | | Date of Implementation | 2015-09-01 | | Older Standard (superseded by this standard) | SN/T 1794.2-2006 | | Regulation (derived from) | State-Quality-Inspection-Accreditation [2015] 59 | | Issuing agency(ies) | General Administration of Customs | SN/T 1794.2-2006: Import and export of electrical accessories inspection procedures - Part 2: wire components
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Import and export of electrical accessories inspection procedures - Part 2. wire components
Book of the People's Republic of China Entry and Exit Inspection and Quarantine
Import and export electrical accessories inspection procedures
Part 2. Wire assemblies
Released on.2006-08-28
2007-03-01 implementation
People's Republic
The General Administration of Quality Supervision, Inspection and Quarantine issued
Foreword
SN/T 1794 "Inspection Procedures for Import and Export Electrical Appliances Accessories" consists of several parts, and its expected structure is.
--- Part 1. General requirements;
--- Part 2. Wire assemblies;
This part is the second part of SN/T 1794.
This part is proposed and managed by the National Certification and Accreditation Administration.
This section drafted by. Shenzhen Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this section. Zhong Yong, Chen Hongzhong, Wang Yusen.
This section is the first published industry standard for entry-exit inspection and quarantine.
Introduction
The "Import and Export Electrical Appliances Inspection Procedures" is the basis for the inspection of import and export electrical accessories, and refers to the inspection of import and export electrical accessories.
Guidance and normative role.
With the revision of China's accession to the World Trade Organization (WTO) and the "Commodity Inspection Law," the import and export commodity inspection work model has undergone great changes.
In order to adapt to the changes in the situation, the national inspection and quarantine authorities have established a system of inspection and quarantine standards.
This part belongs to the fourth layer of the inspection and quarantine standard system---personality standard, which stipulates the requirements for inspection of import and export wire assemblies.
Import and export electrical accessories inspection procedures
Part 2. Wire assemblies
1 Scope
This section specifies the requirements for wire assemblies for household and similar general equipment.
This section does not apply to industrial wire assemblies (ie with industrial plugs and connections in accordance with GB/T 11918 and GB/T 11919)
The wire assembly of the device does not apply to extended wire assemblies.
2 Normative references
The terms in the following documents become the provisions of this part by reference to this part of SN/T 1794. Quotations with dated
, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section
The latest versions of these documents are available for study by parties to the agreement. For undated references, the latest edition applies to this section.
GB/T 2828.1. Sampling and sampling procedures - Part 1 . Batch-to-batch sampling plan searched by the acceptance quality limit (AQL)
(GB/T 2828.1-2003, ISO 2859-1..1999, IDT)
GB 15934-1996 wire assembly (idt IEC 60799. 1984)
GB 17465.1-1998 Appliance couplers for household and similar purposes Part 1. General requirements (eqv IEC 60320-1.
1994)
Basic requirements for the preparation of SN/T 0002 import and export electromechanical commodity inspection procedures
3 Terms and definitions
GB/T 2828.1, GB 15934-1996, SN/T 0002 established and the following terms and definitions apply to this section.
3.1
A wire assembly is a component consisting of a flexible cable or cord with a non-rewirable plug and a non-rewirable connector.
The device or device is connected to the power source.
Note. “non-rewirable plug” and “non-rewirable connector” means that the manufacturer has assembled the cord with the plug or connector as a whole without permanent.
A plug or connector that cannot be removed without damage and cannot be removed by hand or by a general tool such as a screw driver.
The difference between a wire assembly and an extension cord assembly is that the latter has a removable socket without a connector and does not directly interface the appliance or device with
Power connection.
3.2
According to the mandatory requirements of the national technical specifications, the type test shall be carried out according to the prescribed period, and the products shall be subjected to batch inspection according to the on-site inspection regulations.
Inspection and implementation of the conformity assessment activities of the company's quality management system.
3.3
According to the mandatory requirements of the national technical specifications, the import and export commodities shall be subject to the conformity assessment activities of sampling, inspection and inspection batch by batch or batch.
3.4
The same specifications, models, and unit products produced under the same production conditions for the purpose of inspection are referred to as batches.
|