|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
MT/T 783-1998: Reinforced filler for rubber and plastic made of ash and slag from fluidized bed Boiler Specification limits
Status: Obsolete
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| MT/T 783-1998 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Reinforced filler for rubber and plastic made of ash and slag from fluidized bed Boiler Specification limits
| Obsolete |
MT/T 783-1998
|
PDF similar to MT/T 783-1998
Standard similar to MT/T 783-1998 GB/T 3780.18 GB/T 3780.10 GB/T 3780.1 Basic data | Standard ID | MT/T 783-1998 (MT/T783-1998) | | Description (Translated English) | Reinforced filler for rubber and plastic made of ash and slag from fluidized bed Boiler Specification limits | | Sector / Industry | Coal Industry Standard (Recommended) | | Classification of Chinese Standard | G49 | | Classification of International Standard | 83.040.20 | | Word Count Estimation | 7,794 | | Date of Issue | 11/10/1998 | | Date of Implementation | 4/1/1999 | MT/T 7: ---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Reinforced filler for rubber and plastic made of ash and slag from fluidized bed Boiler Specification limits
People's Republic of China Coal Industry Standard
Technical requirements for rubber plastic reinforced filler made from ash and slag in boiling furnace
Reinforced
filer
for
rubber
and
plastic
made
of
ash
and
slag
from
fluidized
bed
Boiler
Specifieation
limits
1998-11-10 Approved.1999-04-01 Implementation
Approved by State Coal Industry Bureau
Contents
1 Scope 1
2 Normative references 1
3 Product code 1
4 Technical requirements 1
5 Test method 2
6 Inspection rules 3
7 Marking, packaging, transportation, storage 3
Technical requirements for rubber plastic reinforced filler made from ash and slag in boiling furnace
1 Scope
This standard specifies the product code, technical requirements, test methods,
Inspection rules and signs, packaging, transportation and storage.
This standard applies to coal or inferior fuel (coal gangue, stone coal, lignite, oil shale, etc.) as the original ash and slag after combustion in a boiling boiler.
Materials, processed rubber and plastic reinforcing fillers.
2 Reference standards
The following standards contain provisions that, through reference in this standard, constitute provisions of this standard. When this standard was published, the editions shown were all
Is effective. All standards will be revised, and all parties using this standard should explore the possibility of using the latest versions of the following standards.
GB/T
528-1992 determination of tensile properties of vulcanized rubber and thermoplastic rubber
GB/T
2941-1991 Standard Temperature, Humidity and Time for Parking and Testing of Rubber Specimens
GB/T
3780.1-1991 determination of iodine absorption value of carbon black
GB/T
3780.3-1994 carbon black dibutyl phthalate absorption value determination (method B)
GB/T
3780.7-1996 carbon black pH value determination
GB/T
3780.8-1992 determination of heating loss of carbon black
GB/T
3780.12-1995 Inspection of carbon black impurities
GB/T
3780.18-1988 Formula and identification method of carbon black in natural rubber
GB/T
Determination of pour density of granulated carbon black for rubber
HG/T
2198-1991 General requirements for physical test methods for vulcanizates
3 Product code
4 Technical requirements
The FZT series of highly wettable rubber and plastic reinforced fillers shall meet the technical index requirements listed in Table 1.
Table 1 Technical indicators
Project Unit
index
FZT-1 packing FZT-2 packing
1 Appearance black powdery gray powdery
2 Heating loss% ≤1.5 ≤1.5
3 No impurities
4 Sieve balance% ≤1 ≤2
5 pH value 7.5 ~ 10.0 7.5 ~ 10.0
6 DBP absorption value 10-5
m3/kg ≤60 ≤50
7 Iodine value g/kg 10 ~ 30 10 ~ 30
8 Bulk density g/cm3 0.7 ~ 0.9 0.8 ~ 1.0
9 Vulcanized rubber tensile strength MPa ≥22 ≥18
10 Elongation at break of vulcanized rubber% ≥500 ≥580
5 Test method
5.1 Appearance measurement by visual inspection
5.2 Determination of heating loss according to GB/T
3780.8-1992 conducted
5.3 Determination of impurities according to GB/T
3780.12-1995 conducted
5.4 Determination of sieve balance
5.4.1 Instrument.
a) Analytical balance. accuracy of 0.001
g;
b) Industrial balance with accuracy of 0.1
g;
c) Standard sieve. hole diameter is 0.0432
mm;
d) Wool brush. flat and hair length no less than 2
cm;
e) watch glass. ϕ80
mm.
5.4.2 Steps.
5.4.2.1 Weigh sample 20
g (weighing to 0.1
g), put into a dry, clean standard sieve.
5.4.2.2 Gently brush with a wool brush.If there are any clumps of particles, use your fingers to lightly loosen them.
But so far.
5.4.2.3 Move the sieve residue that cannot pass through the sieve into a weighed watch glass and weigh it with an analytical balance to the nearest 0.001
g.
5.4.3 Expression of results.
5.4.3.1 The result of sieve residue is expressed as mass percentage and calculated according to the following formula.
m1-m2
m × 100%
Where.
m1 --- mass of watch glass and sieve residue, g;
m2 --- mass of watch glass, g;
m --- the mass of the filler sample, g.
The test results are subject to one measurement.
5.5 Determination of pH value according to GB/T
3780.7-1996 conducted
5.6 Determination of DBP absorption value according to GB/T
3780.3-1994 conducted
5.7 Determination of iodine absorption value according to GB/T
3780.1-1991 conducted
5.8 Determination of bulk density according to GB/T
14853.1-1993 conducted
5.9 Determination of tensile strength and elongation of vulcanized rubber
5.9.1 Formulation of FZT series highly wettable rubber reinforcing fillers in natural rubber (see Table 2).
Table 2 Identification formula
Technical Specifications
Natural rubber NK002 first grade tobacco flake glue 100.00
Stearic acid QB
523 first grade 3.00
Zinc oxide QB
318 first-class goods 5.00
Accelerator CZ HG2-478 first grade 0.80
Sulfur GB
2449 first grade 2.85
FZT reinforcing filler 40.00
Total 151.65
Note.
Tobacco sheet glue should be kept dry, clean, and strong, and there should be no rust, stickiness, bubbles, sand, oxidation spots or streaks, and no other foreign impurities.
5.9.2 Identification of the curing conditions of the formula.
a) Vulcanization temperature. (143 ± 1) ℃;
b) Vulcanization time. 10, 15, 20, 25
min.
5.9.3 Determination of tensile strength and elongation of vulcanized rubber
528-1992, GB/T
2941-1991, GB/T
3780.18-1988
And HG/T
The requirements of 2198-1991 regarding equipment, preparation of carbon black samples, mixing, preparation of vulcanized rubber test pieces, and vulcanization procedures were carried out.
6 Inspection rules
6.1 The products can only be delivered after passing the inspection by the quality inspection department of the manufacturer and issuing a certificate of conformity. The items inspected at the factory are items 2, 4, and 6 in Table 1.
6.2 Each batch of products shall not exceed 50
t, within this range, randomly extract at least 1/2 of the total package number of complete original package products, averaged from each package
Sampling, a total of about 2 samples
kg.
6.3 Mix the sampled products evenly, use the quartile method to divide them, and take 2 parts into dry, clean, and ground glass bottles.
Sign, indicate the batch number, sampling date, one bottle sent to the inspection department for inspection, the other bottle stored 30
d, for re-inspection.
6.4 If the product does not meet the specified indicators after inspection, it shall be re-sampled for re-inspection of the non-conforming items.
Grid products.
7 Marking, packaging, transportation, storage
7.1 Signs
The front of the packaging bag should be marked with the color of the product name, model, trademark, batch number, net weight, manufacturer name, production date, and execution standard
Number, etc.
7.2 Packaging
7.2.1 The packaging form is flat rectangular parallelepiped.
7.2.2 Net weight of 25.0 per package
kg, 40.0
kg for packaging.
7.2.3 The material and structure of the packaging bag must be capable of preventing moisture and pollution, and one of the following can be selected.
a) Plastic bag. the inner bag is a plastic film bag, and the outer bag is a plastic woven bag;
b) Composite bag. A plastic film is adhered to the inner wall of the plastic woven bag.
7.2.4 The packaging bag is made of cotton or synthetic fiber thread and stitched by hand or sewing machine. The plastic film bag can be glued, heat-sealed or tied with string
Strapping.
7.3 Transport and storage
7.3.7 During transportation, clean, dry, non-thorny, and awning transportation tools must be used to prevent the product from being wet and the packaging damaged.
7.3.2 The product should be stored in a dry and ventilated warehouse to avoid moisture, pollution and damage; it should be stored separately in batches to prevent confusion of batch numbers.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of MT/T 783-1998_English be delivered?Answer: Upon your order, we will start to translate MT/T 783-1998_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of MT/T 783-1998_English with my colleagues?Answer: Yes. The purchased PDF of MT/T 783-1998_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|